Description: Das Projekt "Entwicklung eines kombinierten Verfahrens aus Akustik und Infrarotthermografie zur quantitativen Evaluation der Luftdichtheit von Gebäudefassaden" wird/wurde ausgeführt durch: Deutsches Zentrum für Luft- und Raumfahrt e.V. (DLR), Institut für Solarforschung (SF), Standort Köln.Der unbeabsichtigte Luftaustausch durch die Gebäudehülle ist eine der wesentlichen Quellen für Wärmeverluste in Gebäuden und deren Energieverbrauch. Die Quantifizierung und Identifikation einzelner Leckagen in der Gebäudehülle ist mit Stand-der-Technik Verfahren bisher anspruchsvoll, zeitaufwändig und hängt stark von der Erfahrung des jeweiligen Energieberaters ab. Das schnelle und sichere Auffinden von Leckagen spielt allerdings eine entscheidende Rolle bei einer zügigen und großflächigen Sanierung von Bestandsgebäuden. In diesem Projekt soll ein Messsystem sowie eine dafür geeignete Ultraschallquelle entwickelt werden, mit dem Ziel, Leckagen in Gebäudehüllen schnell und für Bewohner möglichst störungsfrei zu identifizieren. Das System basiert auf der Kombination von Schallquellenortung mittels Mikrofon-Array-Technologie ('Akustische Kamera') und Infrarotthermografie. Durch die kombinierte Auswertung von Akustik und Thermografie können die Vorteile beider Verfahren kombiniert und die spezifischen Nachteile der einzelnen Verfahren verringert werden. Im Labor wird untersucht, wie mit dieser Methode die energetische Relevanz (Luftaustauschrate) verschiedener Leckagen bestimmt werden kann. Entwicklungsbegleitende Tests an Sanierungsbaustellen sollen Praxisanforderungen gewährleisten und zu einer Beschleunigung der Prozesse der seriellen Gebäudesanierung führen. Abschließend ist ein Ergebnisvergleich des Systems mit einer professionellen Luftdichtheitsprüfung nach Stand der Technik geplant. Das DLR übernimmt die Koordination des Vorhabens. Neben der Durchführung von Voruntersuchungen im Feld, sowie von Praxistests und der Validierung liegt der fachliche Schwerpunkt des DLR auf den Laborarbeiten. Hier werden insbesondere die Ortung und Quantifizierbarkeit diverser Leckage-Setups im Labor bei unterschiedlichen Anregungsarten im Laborprüfstand untersucht.
Types:
SupportProgram
Origins:
/Bund/UBA/UFORDAT
Tags:
Köln
?
Akustik
?
Messeinrichtung
?
Gebäude
?
Thermografie
?
Gebäudefassade
?
Luftdichtheit
?
Blower-Door-Test
?
Energieverbrauch
?
Stand der Technik
?
Gebäudesanierung
?
Luftwechselrate
?
Gebäudehülle
?
Gebäudebestand
?
Arbeit
?
Leckage
?
Raumfahrt
?
Region:
Nordrhein-Westfalen
Bounding boxes:
6.76339° .. 6.76339° x 51.21895° .. 51.21895°
License: cc-by-nc-nd/4.0
Language: Deutsch
Organisations
-
Deutsches Zentrum für Luft- und Raumfahrt e.V. (DLR), Institut für Solarforschung (SF), Standort Köln (Betreiber*in)
-
Gesellschaft zur Förderung angewandter Informatik e.V. (Mitwirkende)
-
SONOTEC GmbH (Mitwirkende)
-
Umweltbundesamt (Bereitsteller*in)
Time ranges:
2023-09-01 - 2026-08-31
Alternatives
-
Language: Englisch/English
Title: Development of a combined method of acoustics and infrared thermography for the quantitative evaluation of the airtightness of building facades and for the location of leaks
Description: Unintentional air exchange through the building envelope is one of the major sources of heat loss in buildings and their energy consumption. The quantification and identification of individual leaks in the building envelope has so far been challenging and time-consuming using state-of-theart methods, and depends heavily on the experience of the respective energy consultant. However, the fast and reliable detection of leaks plays a decisive role in the rapid and large-scale refurbishment of existing buildings. In this project, a measurement system and a suitable ultrasound source are to be developed with the aim of identifying leaks in building envelopes quickly and with as little disruption as possible for occupants. The system is based on a combination of sound source localization using microphone array technology ('acoustic camera') and infrared thermography. The combined evaluation of acoustics and thermography allows the advantages of both methods to be combined and the specific disadvantages of each method to be reduced. In the laboratory, we are investigating how this method can be used to determine the energy relevance (air exchange rate) of various leakages. Development-accompanying tests at refurbishment construction sites are to ensure practical requirements and lead to an acceleration of the processes of serial building refurbishment. Finally, a comparison of the results of the system with a professional air tightness test according to the state of the art is planned. DLR is coordinating the project. In addition to conducting preliminary investigations in the field, as well as practical tests and validation, DLR's technical focus is on the laboratory work. In particular, the location and quantifiability of various leakage setups will be investigated in the laboratory under different types of excitation in the laboratory test rig.
https://ufordat.uba.de/UFORDAT/pages/PublicRedirect.aspx?TYP=PR&DSNR=1119103
Status
Quality score
- Overall: 0.47
-
Findability: 0.53
- Title: 0.00
- Description: 0.19
- Identifier: false
- Keywords: 1.00
- Spatial: RegionIdentified (1.00)
- Temporal: true
-
Accessibility: 0.67
- Landing page: Specific (1.00)
- Direct access: false
- Publicly accessible: true
-
Interoperability: 0.00
- Open file format: false
- Media type: false
- Machine-readable metadata: false
- Machine-readable data: false
-
Reusability: 0.67
- License: ClearlySpecifiedAndFree (1.00)
- Contact info: false
- Publisher info: true
Accessed 1 times.