Description: Das Projekt "New components to achieve higher quality and cost reduction of PV-modules" wird vom Umweltbundesamt gefördert und von Fabrimex GmbH durchgeführt. General Information: State of the art PV-module lamination has some disadvantages: - Six different layers to handle, to cut, to lay up in staple - Protective laminates including aluminium foil have the advantage of full moisture barrier but the disadvantage of causing electrical problems (short circuits, break down) - Low moisture barrier of standard protective laminates - Long cycle time of the laminating process. To overcome these advantages the objectives of this project are: - New moisture barrier layers by coating of dielectrics (SiO, mixed oxides with MgO etc) on suitable substrates. - Incorporation of these barrier layers to integrated encapsulating composites, which include fast curing encapsulating EVA by direct extrusion of EVA onto the protective laminate. - Further new materials and systems for a low cost encapsulation process without glass will be investigated. The new products will be at lower cost and the new lamination process will need only 50 per cent of time. This will lower cost of module lamination up to 30 per cent and increase productivity. A realization time interval of 2 to 3 years into industrial scale is expected after successful completion of the project. Prime Contractor: Isolvolta Österreichische Isolierstoffwerke AG, Werk Werndorf; Austria.
Types:
SupportProgram
Origin: /Bund/UBA/UFORDAT
Tags: Mischoxid ? Österreich ? Aluminiumfolie ? Materialprüfung ? Energietechnik ? Energieumwandlung ? Kapselung ? Kostensenkung ? Modul ? Stand der Technik ? Produktivität ? Technische Aspekte ? Neuartige Materialien ? Effizienzsteigerung ? Energiespeicherung ? Haltbarkeit ?
Region: Baden-Württemberg
Bounding box: 9° .. 9° x 48.5° .. 48.5°
License: cc-by-nc-nd/4.0
Language: Deutsch
Time ranges: 1997-05-01 - 1999-04-30
Accessed 1 times.