Darstellung der Trennsysteme (vorhanden und geplant) im Stadtgebiet mit den dazugehörigen Ableitungsarten (Versickerung oder Ableitung; vorhanden und geplant) aus dem ABK mit dem Stand 2012
Darstellung von Abkopplungsprojekten im Stadtgebiet
Das Projekt "Environmental Manual for Power Development - Phase III" wird vom Umweltbundesamt gefördert und von Öko-Institut. Institut für angewandte Ökologie e.V. durchgeführt.
Das Projekt "Forest vegetation development in the Bavarian Forest National Park following the 1983 windfall event" wird vom Umweltbundesamt gefördert und von Technische Universität München, Fachgebiet Geobotanik durchgeführt. In the Bavarian Forest National Park a brief, but intense storm event on 1 August 1983 created large windfall areas. The windfall ecosystems within the protection zone of the park were left develop without interference; outside this zone windfall areas were cleared of dead wood but not afforested. A set of permanent plots (transect design with 10 to 10 m plots) was established in 1988 in spruce forests of wet and cool valley bottoms in order to document vegetation development. Resampling shall take place every five years; up to now it was done in 1993 and 1998. On cleared areas an initial raspberry (Rubus idaeus) shrub community was followed by pioneer birch (Betula pubescens, B. pendula) woodland, a sequence well known from managed forest stands. In contrast to this, these two stages were restricted to root plates of fallen trees in uncleared windfalls; here shade-tolerant tree species of the terminal forest stages established rather quickly from saplings that had already been present in the preceeding forest stand. Soil surface disturbances are identified to be causal to the management pathway of forest development, wereas the untouched pathway is caused by relatively low disturbance levels. The simulation model FORSKA-M is used to analyse different options of further stand development with a simulation time period of one hundred years.
Das Projekt "Improving the Livelihood of the Rural Population through the Production of Bushmeat in Ghana" wird vom Umweltbundesamt gefördert und von Universität Hamburg, Arbeitsbereich für Weltforstwirtschaft und Institut für Weltforstwirtschaft des Friedrich-Löffler-Institut, Bundesforschungsinstitut für Tiergesundheit durchgeführt. Background: Ghanas transition forests, neighbouring savannahs and timber plantations in the Ashanti region face a constant degradation due to the increased occurrence of fires. In most cases the fires are deliberately set by rural people for hunting purposes. Main target is a cane rat, here called grasscutter (Thryonomys swinderianus), whose bushmeat is highly esteemed throughout the country. The animal is a wild herbivorous rodent of subhumid areas in Africa south of the Sahara. The grasscutter meat is an important source of animal protein. Existing high-value timber plantations (mainly Teak, Tectona grandis) are affected by fires for hunting purposes. Thus resulting in growth reduction, loss of biomass or even complete destruction of the forest stands. It became obvious that solutions had to be sought for the reduction of the fire risk. Objectives: Since 2004 the Institute for World Forestry of the Federal Research Centre for Forestry and Forest Products, Hamburg, Germany is cooperating with a Ghanaian timber plantation company (DuPaul Wood Treatment Ltd.) the German Foundation for Forest Conservation in Africa (Stiftung Walderhaltung in Afrika) and the Center for International Migration with the purpose to improve the livelihood of the rural population in the surroundings of the forest plantation sites and simultaneously to safeguard and improve the timber plantations. The introduction of grasscutter rearing systems to local farmers accompanied by permanent agricultural and agroforestry practices appeared to be a promising approach for the prevention of fires in the susceptible areas. Additionally a functioning grasscutter breeding system could contribute to the improvement of food security, development of income sources and the alleviation of poverty. The following measures are implemented: - Identification of farmers interested in grasscutter captive breeding, - Implementation of training courses for farmers on grasscutter rearing, - Delivery of breeding animals, - Supervision of rearing conditions by project staff, - Development of a local extension service for monitoring activities, - Evaluation of structures for grasscutter meat marketing. Results: After identification of key persons for animal rearing training courses were successfully passed and animals were delivered subsequently. Further investigations will evaluate the effects of the grasscutter rearing in the project region. This will be assessed through the - Acceptance of grasscutter rearing by farmers, - Success of the animal caging, - Reproduction rate, - Meat quality, - Marketing success of meat, - Reduction of fire in the vicinity of the timber plantations, - Improvement of peoples livelihood.
Das Projekt "Development of a modelling system for prediction and regulation of livestock waste pollution in the humid tropics" wird vom Umweltbundesamt gefördert und von Universität Hohenheim, Institut für Tropische Agrarwissenschaften (Hans-Ruthenberg-Institut), Fachgebiet Pflanzenbau in den Tropen und Subtropen (490e) durchgeführt. Introduction: In Malaysia, excessive nutrients from livestock waste management systems are currently released to the environment. Particularly, large amounts of manure from intensive pig production areas are being excreted daily and are not being fully utilised. Alternatively, the excess manure can be applied as an organic fertiliser source in neighbouring cropping systems on the small landholdings of the pig farms to improve soil fertility so that its nutrients will be available for crop uptake instead of being discharged into water streams. Thus, there is a need for better tools to analyse the present situation, to evaluate and monitor alternative livestock production systems and manure management scenarios, and to support farmers in the proper management of manure and fertiliser application. Such tools are essential to quantify, and assess nutrient fluxes, manure quality and content, manure storage and application rate to the land as well as its environmental effects. Several computer models of animal waste management systems to assist producers and authorities are now available. However, it is felt that more development is needed to adopt such models to the humid tropics and conditions of Malaysia and other developing countries in the region. Objectives: The aim is to develop a novel model to evaluate nutrient emission scenarios and the impact of livestock waste at the landscape or regional level in humid tropics. The study will link and improve existing models to evaluate emission of N to the atmosphere, and leaching of nutrients to groundwater and surface water. The simulation outputs of the models will be integrated with a GIS spatial analysis to model the distribution of nutrient emission, leaching and appropriate manure application on neighbouring crop lands and as an information and decision support tool for the relevant users.
Das Projekt "Establishment of Teak plantations for high-value timber production in Ghana" wird vom Umweltbundesamt gefördert und von Universität Hamburg, Arbeitsbereich für Weltforstwirtschaft und Institut für Weltforstwirtschaft des Friedrich-Löffler-Institut, Bundesforschungsinstitut für Tiergesundheit durchgeführt. Background and Objectives: The project area is located in the Ashanti Region of Ghana / West Africa in the transition zone of the moist semideciduous forest and tropical savannah zone. Main land use in this region is subsistence agriculture with large fallow areas. As an alternative land-use, forest plantations are under development by the Ghanaian wood processing company DuPaul Wood Treatment Ltd. Labourers from the surrounding villages are employed as permanent or casual plantation workers. Within three forest plantation projects of approximately 6,000 ha, DuPaul offers an area of 164 ha (referred to as Papasi Plantation) - which is mainly planted with Teak (Tectona grandis) - for research purposes. In return, the company expects consultations to improve the management for sustainable timber and pole production with exotic and native tree species. Results: In a first research approach, the Papasi Plantation was assessed in terms of vegetation classification, timber resources (in qualitative and quantitative terms) and soil and site conditions. A permanent sampling plot system was established to enable long-term monitoring of stand dynamics including observation of stand response to silvicultural treatments. Site conditions are ideally suited for Teak and some stands show exceptionally good growth performances. However, poor weed management and a lack of fire control and silvicultural management led to high mortality and poor growth performance of some stands, resulting in relative low overall growth averages. In a second step, a social baseline study was carried out in the surrounding villages and identified landowner conflicts between some villagers and DuPaul, which could be one reason for the fire damages. However, the study also revealed a general interest for collaboration in agroforestry on DuPaul land on both sides. Thirdly, a silvicultural management concept was elaborated and an improved integration of the rural population into DuPaul's forest plantation projects is already initiated. If landowner conflicts can be solved, the development of forest plantations can contribute significantly to the economic income of rural households while environmental benefits provide long-term opportunities for sustainable development of the region. Funding: GTZ supported PPP-Measure, Foundation
Das Projekt "Das Energiewende-Szenario 2020 - Ausstieg aus der Atomenergie, Einstieg in Klimaschutz und nachhaltige Entwicklung" wird vom Umweltbundesamt gefördert und von Öko-Institut. Institut für angewandte Ökologie e.V. durchgeführt.
Das Projekt "Toxikologische Basisdaten für die Ableitung von EU-LCI-Werten für 5 Stoffe/Stoffgruppen" wird vom Umweltbundesamt gefördert und von Dr. Jens-Uwe Voss Toxikologische Beratung durchgeführt. Ziel des Vorhabens ist die Erstellung von Stoffberichten für fünf für Bauproduktemissionen relevante Stoffe oder Stoffgruppen. Für diese Stoffe/Stoffgruppen werden die toxikologischen Datengrundlagen recherchiert, zusammengestellt und bewertet sowie EU-LCI-Werte vorgeschlagen. Die EU-LCI-Werte ermöglichen die europaweite Harmonisierung der gesundheitlichen Bewertung von Bauproduktemissionen. Die EU-LCI-Arbeitsgruppe entwickelt derzeit eine harmonisierte europäische Liste von Stoffen und den dazugehörigen Emissionsgrenzwerten. Die in diesem Projekt entwickelten Stoffberichte unterstützen und beschleunigen diesen Prozess.
Das Projekt "Leistungsoptimierte Lithium-lonen Batterien" wird vom Umweltbundesamt gefördert und von Technische Hochschule Aachen, Lehrstuhl und Institut für Stromrichtertechnik und Elektrische Antriebe durchgeführt. Der schnelle Fortschritt der elektronischen Geräte erhöht die Nachfrage nach verbesserten Li-Ionen Batterien. Kommerziell erhältliche Li-Zellen nutzen meist Lithiumkobaltoxid für die positive Elektrode. Doch gerade dieses Material ist ein Hindernis für eine weitere Optimierung, insbesondere für eine Kostensenkung. Vor allem für größere Anwendungen wie Hybrid- oder Elektrofahrzeuge müssen alternative Materialen erforscht werden, die billiger, sicherer und umweltverträglicher sind. Daher wird im ISEA derzeit ein neues Forschungsprojekt ins Leben gerufen und die dafür benötigte Infrastruktur geschaffen. Die Forschung wird sich auf die Untersuchung geeigneter Übergangsmetalloxide und Polyanionen konzentrieren, die besonders gut zur Einlagerung von Li-Ionen geeignet sind. Es werden neue Herstellungsverfahren unter Verwendung wässriger Precurser-Substanzen untersucht, die Verbindungen mit überlegenen Eigenschaften erzeugen und außerdem leicht an eine Massenproduktion angepasst werden können. Ziel der Arbeiten ist, preisgünstiges Elektrodenmaterial zu entwickeln, das eine spezifische Energie von über 200 Wh/kg und eine Leistungsdichte von 400 W/kg aufweist. Außerdem werden Arbeiten im Bereich der physikalisch-chemischen Charakterisierung der neuen Materialien stattfinden sowie elektrochemische Analysen der gesamten Zellen- und Batteriesysteme durchgeführt. Das elektrodynamische Verhalten der neuen Zellen wird u. a. mit Hilfe der elektrochemischen Impedanzspektroskopie analysiert, um präzise und zuverlässige Algorithmen für ein späteres Batteriemonitoring im realen Betrieb zu finden.