Other language confidence: 0.9639317037835409
This data collection, assembled as part of the Arctic PASSION project, encompasses 96 Snow and Ice Mass Balance Array (SIMBA) buoys that were deployed between 2012 and 2023 in the Arctic Ocean (predominantly the Transpolar Drift Stream) and the Southern Ocean (Weddell Sea/Atka Bay). SIMBAs are thermistor string type IMBs (Jackson et al., 2013) which measure the environmental temperature SIMBA-ET and a temperature change around the thermistors after a weak heating is applied to each sensor (SIMBA-HT). Based on a manual classification method, the SIMBA-ET and SIMBA-HT were processed to obtain snow depth and ice thickness (smoothed with a 3-day running mean), as well as the thermistor number, the vertical position Z relative to the snow-ice interface and the measured SIMBA-ET at each detected interface (atmosphere-snow, snow-ice and ice-ocean). To do this, we combined two derivatives of measured temperatures (the ET vertical gradient and HT rise ratio) to reduce the detection uncertainty of all interfaces considered. The snow and/or ice surface, consequentially the snow depth, is determined by the ET vertical gradient. Potential formation of snow ice is not explicitly considered in this data set, but may occur as depicted by vertical changes of the snow-ice interface position. The ice-ocean interface is usually determined using the HT rise ratio and serves as the lower limit for ice thickness. Overall, the accumulated error is 2 to 4 times the sensor spacing for both the snow depth and ice thickness. For interface temperatures, individual sensors in the chain measure with a temperature resolution of 0.0625°C, with the overall accuracy landing in the range of ± 2°C (Jackson et al., 2013). After the snow cover has melted, negative values for snow depth may indicate the onset of ice surface melt.
Temperature and heating-induced temperature difference profiles were measured through the atmosphere, sea ice, and ocean using a SIMBA-type sea ice mass balance buoy equipped with a several meter long thermistor chain. The present dataset was recorded by SIMBA 2022T97 (original name NPOL_0803) installed on drifting sea ice in the Arctic Ocean during the expedition Kronprins Haakon AO22 in 2022. Data is available between 2022-08-06 10:38:00 and 2022-11-22 03:02:00. The thermistor chain was Variable 5 m long and included 241 sensors with a regular spacing of 2 cm. The resulting time series includes the evolution of temperature and temperature differences at 30 s and 120 s during a heating cycle of 120 s as a function of location, depth and time. The sampling intervals were usually between hourly and daily, but were most frequently configured to 6 hours for temperature, and 24 hours for temperature differences. In addition to temperatures and geographic location, barometric pressure, ~1 m air temperature, instrument tilt, and compass heading were measured. The present dataset was processed as follows: obvious inconsistencies (missing values) and unrealistic values of GPS position have been removed. This instrument was deployed as part of the project Arctic Passion.
Temperature and heating-induced temperature difference profiles were measured through the atmosphere, sea ice, and ocean using a SIMBA-type sea ice mass balance buoy equipped with a several meter long thermistor chain. The present dataset was recorded by SIMBA 2022T97 (original name NPOL_0803) installed on drifting sea ice in the Arctic Ocean during the expedition Kronprins Haakon AO22 in 2022. Data is available between 2022-08-06 10:38:00 and 2022-11-22 03:02:00. The thermistor chain was Variable 5 m long and included 241 sensors with a regular spacing of 2 cm. The resulting time series includes the evolution of temperature and temperature differences at 30 s and 120 s during a heating cycle of 120 s as a function of location, depth and time. The sampling intervals were usually between hourly and daily, but were most frequently configured to 6 hours for temperature, and 24 hours for temperature differences. In addition to temperatures and geographic location, barometric pressure, ~1 m air temperature, instrument tilt, and compass heading were measured. The present dataset was processed as follows: obvious inconsistencies (missing values) and unrealistic values of GPS position have been removed. This instrument was deployed as part of the project Arctic Passion.
Temperature and heating-induced temperature difference profiles were measured through the atmosphere, sea ice, and ocean using a SIMBA-type sea ice mass balance buoy equipped with a several meter long thermistor chain. The present dataset was recorded by SIMBA 2019T59 (original name FMI05-10) installed on drifting sea ice in the Central Arctic Ocean during the expedition Polarstern PS122 (MOSAiC) in 2019/20. Data is available between 2019-10-07 07:30:00 and 2020-08-13 19:00:00. The thermistor chain was Variable 5 m long and included 241 sensors with a regular spacing of 2 cm. The resulting time series includes the evolution of temperature and temperature differences at 30 s and 120 s during a heating cycle of 120 s as a function of location, depth and time. The sampling intervals were usually between hourly and daily, but were most frequently configured to 6 hours for temperature, and 24 hours for temperature differences. In addition to temperatures and geographic location, barometric pressure, ~1 m air temperature, instrument tilt, and compass heading were measured. The present dataset was processed as follows: obvious inconsistencies (missing values) and unrealistic values of GPS position have been removed. This instrument was deployed as part of the project FMI.
Temperature and heating-induced temperature difference profiles were measured through the atmosphere, sea ice, and ocean using a SIMBA-type sea ice mass balance buoy equipped with a several meter long thermistor chain. The present dataset was recorded by SIMBA 2019T59 (original name FMI05-10) installed on drifting sea ice in the Central Arctic Ocean during the expedition Polarstern PS122 (MOSAiC) in 2019/20. Data is available between 2019-10-07 07:30:00 and 2020-08-13 19:00:00. The thermistor chain was Variable 5 m long and included 241 sensors with a regular spacing of 2 cm. The resulting time series includes the evolution of temperature and temperature differences at 30 s and 120 s during a heating cycle of 120 s as a function of location, depth and time. The sampling intervals were usually between hourly and daily, but were most frequently configured to 6 hours for temperature, and 24 hours for temperature differences. In addition to temperatures and geographic location, barometric pressure, ~1 m air temperature, instrument tilt, and compass heading were measured. The present dataset was processed as follows: obvious inconsistencies (missing values) and unrealistic values of GPS position have been removed. This instrument was deployed as part of the project FMI.
Temperature and heating-induced temperature difference profiles were measured through the atmosphere, sea ice, and ocean using a SIMBA-type sea ice mass balance buoy equipped with a several meter long thermistor chain. The present dataset was recorded by SIMBA 2018T55 (original name FMI_0505) installed on drifting sea ice in the Arctic Ocean during the expedition Fedorov Transdrift XXIV (TICE) in 2018. Data is available between 2018-09-15 10:00:00 and 2020-04-04 03:00:00. The thermistor chain was Variable 5 m long and included 241 sensors with a regular spacing of 2 cm. The resulting time series includes the evolution of temperature and temperature differences at 30 s and 120 s during a heating cycle of 120 s as a function of location, depth and time. The sampling intervals were usually between hourly and daily, but were most frequently configured to 6 hours for temperature, and 24 hours for temperature differences. In addition to temperatures and geographic location, barometric pressure, ~1 m air temperature, instrument tilt, and compass heading were measured. The present dataset was processed as follows: obvious inconsistencies (missing values) and unrealistic values of GPS position have been removed. This instrument was deployed as part of the project FMI.
Temperature and heating-induced temperature difference profiles were measured through the atmosphere, sea ice, and ocean using a SIMBA-type sea ice mass balance buoy equipped with a several meter long thermistor chain. The present dataset was recorded by SIMBA 2019T57 (original name FMI05-08) installed on drifting sea ice in the Arctic Ocean during the expedition Polarstern PS122 (MOSAiC) in 2019/20. Data is available between 2019-10-07 03:00:00 and 2020-01-18 02:00:00. The thermistor chain was Variable 5 m long and included 241 sensors with a regular spacing of 2 cm. The resulting time series includes the evolution of temperature and temperature differences at 30 s and 120 s during a heating cycle of 120 s as a function of location, depth and time. The sampling intervals were usually between hourly and daily, but were most frequently configured to 6 hours for temperature, and 24 hours for temperature differences. In addition to temperatures and geographic location, barometric pressure, ~1 m air temperature, instrument tilt, and compass heading were measured. The present dataset was processed as follows: obvious inconsistencies (missing values) and unrealistic values of GPS position have been removed. This instrument was deployed as part of the project FMI.
Temperature and heating-induced temperature difference profiles were measured through the atmosphere, sea ice, and ocean using a SIMBA-type sea ice mass balance buoy equipped with a several meter long thermistor chain. The present dataset was recorded by SIMBA 2019T57 (original name FMI05-08) installed on drifting sea ice in the Arctic Ocean during the expedition Polarstern PS122 (MOSAiC) in 2019/20. Data is available between 2019-10-07 03:00:00 and 2020-01-18 02:00:00. The thermistor chain was Variable 5 m long and included 241 sensors with a regular spacing of 2 cm. The resulting time series includes the evolution of temperature and temperature differences at 30 s and 120 s during a heating cycle of 120 s as a function of location, depth and time. The sampling intervals were usually between hourly and daily, but were most frequently configured to 6 hours for temperature, and 24 hours for temperature differences. In addition to temperatures and geographic location, barometric pressure, ~1 m air temperature, instrument tilt, and compass heading were measured. The present dataset was processed as follows: obvious inconsistencies (missing values) and unrealistic values of GPS position have been removed. This instrument was deployed as part of the project FMI.
Temperature and heating-induced temperature difference profiles were measured through the atmosphere, sea ice, and ocean using a SIMBA-type sea ice mass balance buoy equipped with a several meter long thermistor chain. The present dataset was recorded by SIMBA 2019T57 (original name FMI05-08) installed on drifting sea ice in the Arctic Ocean during the expedition Polarstern PS122 (MOSAiC) in 2019/20. Data is available between 2019-10-07 03:00:00 and 2020-01-18 02:00:00. The thermistor chain was Variable 5 m long and included 241 sensors with a regular spacing of 2 cm. The resulting time series includes the evolution of temperature and temperature differences at 30 s and 120 s during a heating cycle of 120 s as a function of location, depth and time. The sampling intervals were usually between hourly and daily, but were most frequently configured to 6 hours for temperature, and 24 hours for temperature differences. In addition to temperatures and geographic location, barometric pressure, ~1 m air temperature, instrument tilt, and compass heading were measured. The present dataset was processed as follows: obvious inconsistencies (missing values) and unrealistic values of GPS position have been removed. This instrument was deployed as part of the project FMI.
Temperature and heating-induced temperature difference profiles were measured through the atmosphere, sea ice, and ocean using a SIMBA-type sea ice mass balance buoy equipped with a several meter long thermistor chain. The present dataset was recorded by SIMBA 2019T57 (original name FMI05-08) installed on drifting sea ice in the Arctic Ocean during the expedition Polarstern PS122 (MOSAiC) in 2019/20. Data is available between 2019-10-07 03:00:00 and 2020-01-18 02:00:00. The thermistor chain was Variable 5 m long and included 241 sensors with a regular spacing of 2 cm. The resulting time series includes the evolution of temperature and temperature differences at 30 s and 120 s during a heating cycle of 120 s as a function of location, depth and time. The sampling intervals were usually between hourly and daily, but were most frequently configured to 6 hours for temperature, and 24 hours for temperature differences. In addition to temperatures and geographic location, barometric pressure, ~1 m air temperature, instrument tilt, and compass heading were measured. The present dataset was processed as follows: obvious inconsistencies (missing values) and unrealistic values of GPS position have been removed. This instrument was deployed as part of the project FMI.
| Organisation | Count |
|---|---|
| Wissenschaft | 13 |
| Type | Count |
|---|---|
| Daten und Messstellen | 13 |
| License | Count |
|---|---|
| Offen | 13 |
| Language | Count |
|---|---|
| Englisch | 13 |
| Resource type | Count |
|---|---|
| Archiv | 6 |
| Datei | 7 |
| Topic | Count |
|---|---|
| Boden | 7 |
| Lebewesen und Lebensräume | 13 |
| Luft | 13 |
| Mensch und Umwelt | 13 |
| Wasser | 13 |
| Weitere | 13 |