Other language confidence: 0.6255204714872911
Data presented here were collected between January 2025 to December 2025 within the research unit DynaCom (Spatial community ecology in highly dynamic landscapes: From island biogeography to metaecosystems, https://uol.de/dynacom/ ) of the Universities of Oldenburg, Göttingen, and Münster, the iDiv Leipzig and the Nationalpark Niedersächsisches Wattenmeer. Experimental islands and saltmarsh enclosed plots were created in the back barrier tidal flat and in the saltmarsh zone of the island of Spiekeroog. Meteorological data were collected near the experimental setup, with a locally installed weather station located approximately 500m north of the southern shoreline. The weather station system used here was a ClimaSensor US 4.920x.00.00x that was pre-calibrated by the manufacturer (Adolf Thies GmbH & Co. KG, D-Göttingen). Data were recorded and saved within the Processcontrol Weather (c) -4H- JENA engineering GmbH (v20.1.0.1 2020) software in a sampling interval of 1 min, with an averaging time of 10 s. Date and time were given in UTC and the position was derived from the internal GPS system. Data handling was performed according to Zielinski et al. (2018): Post-processing of collected data was done using MATLAB (R2024b). Quality control was performed by (a) erasing data covering maintenance activities, (b) removing outliers, defined as data exhibiting changes of more than two standard deviations within one time step, and (c) visually checks.
Data presented here were collected between January 2024 to December 2024 within the research unit DynaCom (Spatial community ecology in highly dynamic landscapes: From island biogeography to metaecosystems, https://uol.de/dynacom/ ) of the Universities of Oldenburg, Göttingen, and Münster, the iDiv Leipzig and the Nationalpark Niedersächsisches Wattenmeer. Experimental islands and saltmarsh enclosed plots were created in the back barrier tidal flat and in the saltmarsh zone of the island of Spiekeroog. Meteorological data were collected near the experimental setup, with a locally installed weather station located approximately 500m north of the southern shoreline. The weather station system used here was a ClimaSensor US 4.920x.00.00x that was pre-calibrated by the manufacturer (Adolf Thies GmbH & Co. KG, D-Göttingen). Data were recorded and saved within the Processcontrol Weather (c) -4H- JENA engineering GmbH (v20.1.0.1 2020) software in a sampling interval of 1 min, with an averaging time of 10 s. Date and time were given in UTC and the position was derived from the internal GPS system. Data handling was performed according to Zielinski et al. (2018): Post-processing of collected data was done using MATLAB (R2024b). Quality control was performed by (a) erasing data covering maintenance activities, (b) removing outliers, defined as data exhibiting changes of more than two standard deviations within one time step, and (c) visually checks.
Data presented here were collected between January 2022 to December 2023 within the research unit DynaCom (Spatial community ecology in highly dynamic landscapes: From island biogeography to metaecosystems, https://uol.de/dynacom/ ) of the Universities of Oldenburg, Göttingen, and Münster, the iDiv Leipzig and the Nationalpark Niedersächsisches Wattenmeer. Experimental islands and saltmarsh enclosed plots were created in the back barrier tidal flat and in the saltmarsh zone of the island of Spiekeroog. Meteorological data were collected near the experimental setup, with a locally installed weather station located approximately 500m north of the southern shoreline. The weather station system used here was a ClimaSensor US 4.920x.00.00x that was pre-calibrated by the manufacturer (Adolf Thies GmbH & Co. KG, D-Göttingen). Data were recorded and saved within the Processcontrol Weather (c) -4H- JENA engineering GmbH (v20.1.0.1 2020) software in a sampling interval of 1 min, with an averaging time of 10 s. Date and time were given in UTC and the position was derived from the internal GPS system. Data handling was performed according to Zielinski et al. (2018): Post-processing of collected data was done using MATLAB (R2018a). Quality control was performed by (a) erasing data covering maintenance activities, (b) removing outliers, defined as data exhibiting changes of more than two standard deviations within one time step, and (c) visually checks.
Data presented here were collected between January 2022 to December 2023 within the research unit DynaCom (Spatial community ecology in highly dynamic landscapes: From island biogeography to metaecosystems, https://uol.de/dynacom/ ) of the Universities of Oldenburg, Göttingen, and Münster, the iDiv Leipzig and the Nationalpark Niedersächsisches Wattenmeer. Experimental islands and saltmarsh enclosed plots were created in the back barrier tidal flat and in the saltmarsh zone of the island of Spiekeroog. Meteorological data were collected near the experimental setup, with a locally installed weather station located approximately 500m north of the southern shoreline. The weather station system used here was a ClimaSensor US 4.920x.00.00x that was pre-calibrated by the manufacturer (Adolf Thies GmbH & Co. KG, D-Göttingen). Data were recorded and saved within the Processcontrol Weather (c) -4H- JENA engineering GmbH (v20.1.0.1 2020) software in a sampling interval of 1 min, with an averaging time of 10 s. Date and time were given in UTC and the position was derived from the internal GPS system. Data handling was performed according to Zielinski et al. (2018): Post-processing of collected data was done using MATLAB (R2018a). Quality control was performed by (a) erasing data covering maintenance activities, (b) removing outliers, defined as data exhibiting changes of more than two standard deviations within one time step, and (c) visually checks.
Data presented here were collected between January 2022 to December 2023 within the research unit DynaCom (Spatial community ecology in highly dynamic landscapes: From island biogeography to metaecosystems, https://uol.de/dynacom/ ) of the Universities of Oldenburg, Göttingen, and Münster, the iDiv Leipzig and the Nationalpark Niedersächsisches Wattenmeer. Experimental islands and saltmarsh enclosed plots were created in the back barrier tidal flat and in the saltmarsh zone of the island of Spiekeroog. Meteorological data were collected near the experimental setup, with a locally installed weather station located approximately 500m north of the southern shoreline. The weather station system used here was a ClimaSensor US 4.920x.00.00x that was pre-calibrated by the manufacturer (Adolf Thies GmbH & Co. KG, D-Göttingen). Data were recorded and saved within the Processcontrol Weather (c) -4H- JENA engineering GmbH (v20.1.0.1 2020) software in a sampling interval of 1 min, with an averaging time of 10 s. Date and time were given in UTC and the position was derived from the internal GPS system. Data handling was performed according to Zielinski et al. (2018): Post-processing of collected data was done using MATLAB (R2018a). Quality control was performed by (a) erasing data covering maintenance activities, (b) removing outliers, defined as data exhibiting changes of more than two standard deviations within one time step, and (c) visually checks.
Data presented here were collected between January 2022 to December 2023 within the research unit DynaCom (Spatial community ecology in highly dynamic landscapes: From island biogeography to metaecosystems, https://uol.de/dynacom/ ) of the Universities of Oldenburg, Göttingen, and Münster, the iDiv Leipzig and the Nationalpark Niedersächsisches Wattenmeer. Experimental islands and saltmarsh enclosed plots were created in the back barrier tidal flat and in the saltmarsh zone of the island of Spiekeroog. Meteorological data were collected near the experimental setup, with a locally installed weather station located approximately 500m north of the southern shoreline. The weather station system used here was a ClimaSensor US 4.920x.00.00x that was pre-calibrated by the manufacturer (Adolf Thies GmbH & Co. KG, D-Göttingen). Data were recorded and saved within the Processcontrol Weather (c) -4H- JENA engineering GmbH (v20.1.0.1 2020) software in a sampling interval of 1 min, with an averaging time of 10 s. Date and time were given in UTC and the position was derived from the internal GPS system. Data handling was performed according to Zielinski et al. (2018): Post-processing of collected data was done using MATLAB (R2018a). Quality control was performed by (a) erasing data covering maintenance activities, (b) removing outliers, defined as data exhibiting changes of more than two standard deviations within one time step, and (c) visually checks.
Data presented here were collected between January 2022 to December 2023 within the research unit DynaCom (Spatial community ecology in highly dynamic landscapes: From island biogeography to metaecosystems, https://uol.de/dynacom/ ) of the Universities of Oldenburg, Göttingen, and Münster, the iDiv Leipzig and the Nationalpark Niedersächsisches Wattenmeer. Experimental islands and saltmarsh enclosed plots were created in the back barrier tidal flat and in the saltmarsh zone of the island of Spiekeroog. Meteorological data were collected near the experimental setup, with a locally installed weather station located approximately 500m north of the southern shoreline. The weather station system used here was a ClimaSensor US 4.920x.00.00x that was pre-calibrated by the manufacturer (Adolf Thies GmbH & Co. KG, D-Göttingen). Data were recorded and saved within the Processcontrol Weather (c) -4H- JENA engineering GmbH (v20.1.0.1 2020) software in a sampling interval of 1 min, with an averaging time of 10 s. Date and time were given in UTC and the position was derived from the internal GPS system. Data handling was performed according to Zielinski et al. (2018): Post-processing of collected data was done using MATLAB (R2018a). Quality control was performed by (a) erasing data covering maintenance activities, (b) removing outliers, defined as data exhibiting changes of more than two standard deviations within one time step, and (c) visually checks.
Data presented here were collected between January 2022 to December 2023 within the research unit DynaCom (Spatial community ecology in highly dynamic landscapes: From island biogeography to metaecosystems, https://uol.de/dynacom/ ) of the Universities of Oldenburg, Göttingen, and Münster, the iDiv Leipzig and the Nationalpark Niedersächsisches Wattenmeer. Experimental islands and saltmarsh enclosed plots were created in the back barrier tidal flat and in the saltmarsh zone of the island of Spiekeroog. Meteorological data were collected near the experimental setup, with a locally installed weather station located approximately 500m north of the southern shoreline. The weather station system used here was a ClimaSensor US 4.920x.00.00x that was pre-calibrated by the manufacturer (Adolf Thies GmbH & Co. KG, D-Göttingen). Data were recorded and saved within the Processcontrol Weather (c) -4H- JENA engineering GmbH (v20.1.0.1 2020) software in a sampling interval of 1 min, with an averaging time of 10 s. Date and time were given in UTC and the position was derived from the internal GPS system. Data handling was performed according to Zielinski et al. (2018): Post-processing of collected data was done using MATLAB (R2018a). Quality control was performed by (a) erasing data covering maintenance activities, (b) removing outliers, defined as data exhibiting changes of more than two standard deviations within one time step, and (c) visually checks.
Data presented here were collected between January 2022 to December 2023 within the research unit DynaCom (Spatial community ecology in highly dynamic landscapes: From island biogeography to metaecosystems, https://uol.de/dynacom/ ) of the Universities of Oldenburg, Göttingen, and Münster, the iDiv Leipzig and the Nationalpark Niedersächsisches Wattenmeer. Experimental islands and saltmarsh enclosed plots were created in the back barrier tidal flat and in the saltmarsh zone of the island of Spiekeroog. Meteorological data were collected near the experimental setup, with a locally installed weather station located approximately 500m north of the southern shoreline. The weather station system used here was a ClimaSensor US 4.920x.00.00x that was pre-calibrated by the manufacturer (Adolf Thies GmbH & Co. KG, D-Göttingen). Data were recorded and saved within the Processcontrol Weather (c) -4H- JENA engineering GmbH (v20.1.0.1 2020) software in a sampling interval of 1 min, with an averaging time of 10 s. Date and time were given in UTC and the position was derived from the internal GPS system. Data handling was performed according to Zielinski et al. (2018): Post-processing of collected data was done using MATLAB (R2018a). Quality control was performed by (a) erasing data covering maintenance activities, (b) removing outliers, defined as data exhibiting changes of more than two standard deviations within one time step, and (c) visually checks.
Data presented here were collected between November 2019 to September 2023 within the research unit DynaCom (Spatial community ecology in highly dynamic landscapes: From island biogeography to metaecosystems, https://uol.de/dynacom/ ) involving the Universities of Oldenburg, Göttingen, and Münster, the iDiv Leipzig and the Nationalpark Niedersächsisches Wattenmeer. Experimental islands and saltmarsh enclosed plots were established in the back-barrier tidal flat and in the saltmarsh zone of the island of Spiekeroog (Germany). A recording current meter (RCM; SEAGUARD® Recording Current Meter, Aanderaa Data Instruments AS, Bergen/Norway) was installed in the back-barrier tidal flat near the experimental islands. The sensor was bottom-mounted in a shallow tidal creek (0.59 m NHN) using a steel girder buried in the sediment, which caused the sensor to be exposed during low tide. All low-tide data have been removed from the dataset. The system was equipped with a ZPulse Doppler Current Sensor (DCS), a conductivity sensor, an oxygen optode, and two analogue sensors for chlorophyll-a and turbidity (16445). All sensors were pre-calibrated by the manufacturer. Recorded data were internally logged until readout with the SeaGuard Studio software (V1.5.23). Salinity was derived in the SeaGuard Studio software using temperature-dependent, nonlinear seawater conductivity compensation following the Practical Salinity Scale (PSS-78). Subsequent data processing was done using MATLAB (R2024b). Turbidity and chlorophyll-a data were excluded from the final dataset, as the recorded signals show implausible values and did not pass quality-control criteria. Post-processing and quality control included (a) the removal of low tide data, data covering maintenance activities, and data affected by biofouling, (b) the removal of implausible values, c) an outlier detection using the Hampel filter method, and (d) visual checks. Identified outlier were removed and synchronously removed across all associated parameters of the respective sensor.
| Organisation | Count |
|---|---|
| Wissenschaft | 646 |
| Type | Count |
|---|---|
| Daten und Messstellen | 646 |
| License | Count |
|---|---|
| Offen | 646 |
| Language | Count |
|---|---|
| Englisch | 646 |
| Resource type | Count |
|---|---|
| Archiv | 19 |
| Datei | 627 |
| Topic | Count |
|---|---|
| Boden | 184 |
| Lebewesen und Lebensräume | 646 |
| Luft | 93 |
| Mensch und Umwelt | 646 |
| Wasser | 635 |
| Weitere | 646 |