Other language confidence: 0.9812787354559275
This dataset presents the raw data of an experimental series of analogue models performed to investigate the influence of inherited brittle fabrics on narrow continental rifting. This model series was performed to test the influence of brittle pre-existing fabrics on the rifting deformation by cutting the brittle layer at different orientations with respect to the extension direction. An overview of the experimental series is shown in Table 1. In this dataset we provide four different types of data, that can serve as supporting material and for further analysis: 1) The top-view photos, taken at different steps and showing the deformation process of each model; they can be used to interpret the geometrical characteristics of rift-related faults; 2) Digital Elevation Models (DEMs) used to reconstruct the 3D deformation of the performed analogue models, allowing for quantitative analysis of the fault pattern. 3) Short movies built from top-view photos which help to visualize the evolution of model deformation; 4) line-drawing of fault and fracture patters to be used for fault statistical quantification. Further details on the modelling strategy and setup can be found in Corti (2012), Maestrelli et al. (2020), Molnar et al. (2020), Philippon et al. (2015), Zwaan et al. (2021) and in the publication associated with this dataset. Materials used for these analogue models were described in Montanari et al. (2017) Del Ventisette et al. (2019) and Zwaan et al. (2020).
The data set includes the Digital Image Correlation (DIC) results for four experiments of releasing bends along dextral strike-slip faults that were performed at the University of Massachusetts at Amherst (USA). Gabriel et al. (in prep.) used the DIC data sets to investigate how releasing bend fault systems evolve within different strength wet kaolin. Information on the experimental set up and methods can be found in the main text and supplement to Gabriel et al. (in prep.). The data here include the incremental displacement time series, strain animation and surface elevation data at the end of the two experiments with different clay strength, which are presented within Gabriel et al. (in prep). We also include in this data repository incremental displacement time series and strain animations from two experiments that repeat the conditions of the experiments featured in Gabriel et al. (2025).
This dataset presents the raw data from two experimental series of analogue models and four numerical models performed to investigate Rift-Rift-Rift triple junction dynamics, supporting the modelling results described in the submitted paper. Numerical models were run in order to support the outcomes obtained from the analogue models. Our experimental series tested the case of a totally symmetric RRR junction (with rift branch angles trending at 120° and direction of stretching similarly trending at 120°; SY Series) or a less symmetric triple junction (with rift branches trending at 120° but with one of these experiencing orthogonal extension; OR Series), and testing the role of a single or two phases of extension coupled with effect of differential velocities between the three moving plates. An overview of the performed analogue and numerical models is provided in Table 1. Analogue models have been analysed quantitatively by means of photogrammetric reconstruction of Digital Elevation Model (DEM) used for 3D quantification of the deformation, and top-view photo analysis for qualitative descriptions. The analogue materials used in the setup of these models are described in Montanari et al. (2017), Del Ventisette et al. (2019) and Maestrelli et al. (2020). Numerical models were run with the finite element software ASPECT (e.g., Kronbichler et al., 2012; Heister et al., 2017; Rose et al., 2017).
This dataset shows the original data of a series of enhanced-gravity (centrifuge) analogue models, which were performed to test the influence of the pre-existing fabrics in the brittle upper crust on the evolution of structures resulting from oblique rifting. The obliquity of the rift (i.e., the angle between the rift axis and the direction of extension) was kept constant at 30° in all the models. The main variable of this experimental series was the orientation of the pre-existing fabrics (indicated as the angle between the trend of the fabric and the orthogonal to extension), which varied from 0° to 90° (i.e., from orthogonal to parallel to the extension direction). The inherited discontinuities were reproduced by cutting with a knife through the top brittle layer of models. An overview of the experimental series is shown in Table 1. In this dataset, four different data types are provided for further analysis: 1) Top-view photos of model deformation, taken at different time intervals and showing the deformation process of each model; they can be used to interpret the geometrical characteristics of rift-related faults; 2) Digital Elevation Models (DEMs) used to reconstruct the 3D deformation of the analogue models, allowing for quantitative analysis of the fault pattern. 3) Movies of model deformation, built from top-view photos, which help to visualize the evolution of model deformation; 4) Faults line-drawings to be used for statistical quantification of rift-related structures. Further information on the modelling strategy and setup can be found in the publication associated to this dataset and in Corti (2012), Philippon et al. (2015), Maestrelli et al. (2020), Molnar et al. (2020), Zwaan et al. (2021), Zou et al. (2023). Materials used to perform these enhanced-gravity analogue models were described in Montanari et al. (2017), Del Ventisette et al. (2019) and Zwaan et al. (2020).
We have installed 19 new Global Navigation Satellite System (GNSS) markers in the Hindu Kush (NE-Afghanistan) and the North Pamir front (Alai valley) and measured a total of 25 new and existing markers, if possible annually between 2014 and 2020 in survey mode. The stations are positioned along three profiles crossing the NE-striking Panjsheer fault and N-striking Badakhshan fault in the Hindu Kush, and the E-striking Pamir thrust system at the Trans Alai Range. The Hindu Kush survey data are the first of their kind in Afghanistan. The Pamir profile densifies a 1 Hz-GNSS profile that was installed in the Altyndara valley in 2013-2015; the GNSS time-series are affected by the 2015 Mw7.2 Sarez, Central Pamir, earthquake and probably the 2016 Mw6.4 Sary-Tash earthquake. The data are presented in receiver independent exchange (RNX) format and complemented by logsheets, field photos and a technical report describing the surveys in more detail.
This data set includes videos depicting the evolution of nine numerical tectonic models simulating rift-inversion orogens. For these models we apply the 2D thermo-mechanical geodynamic code ASPECT, coupled with FastScape for the inclusion of surface processes. Using the results from these models, we examine mantle serpentinization in rift-inversion orogens, and their associated natural hydrogen gas (H2) potential. Detailed descriptions of the model set-up and results can be found in Zwaan et al. (2025) in Science Advances.
This dataset includes video sequences depicting the evolution in map view and lateral view of 7 analogue experiments studying mantle-scale subduction systems. The experiments are performed under a natural gravity field and are designed to understand the role of convergence obliquity on upper plate deformation and partitioning, with a particular emphasis on the role played by lithospheric inherited structures on the development of sliver tectonics. All experiments were performed at the Laboratory of Tectonic modelling of the University of Rennes 1 (France). The experimental set-up corresponds to a lithosphere and sub-lithospheric upper mantle system. The lithospheric plates are simulated with PDMS silicone (Polydimethylsiloxane Silicone) with different viscosities and densities, and the upper mantle with glucose syrup. In particular, for the overriding plate, we simulate the presence of a weaker volcanic arc that can eventually be decoupled from the forearc by a pre-existing discontinuity. The materials are placed into a Plexiglas tank, where the impermeable bottom of the tank represents the 660 km discontinuity. The subduction is initiated by manually forcing the slab into the mantle and it then evolves under the combined effects of internal buoyancy forces (slab pull) and external boundary forces. The subducting plate is pushed toward the trench at a constant velocity of 1.5 cm/min while the overriding plate is maintained fixed during the duration of the experiments. The evolution of the experiments is monitored by DSLR cameras (24 Mpx) taking pictures every 30 seconds at the top and on one side of the experiments. Pictures are then assembled into video-sequences. The scale bar, with black & white rectangles corresponds to 10 cm. The set of experiments consists of one reference model (MODEL-01) with orthogonal convergence, and six models with oblique convergence (Table 1). Among these models, three do not embed a pre-existing lithospheric discontinuity in the overriding plate (MODEL-02, MODEL-03, and MODEL-04) while the three other (MODEL-05, MODEL-06, and MODEL-07) have such a discontinuity. For the models with oblique convergence, we vary the angle between the convergence direction and the trench from 80° (MODEL-02 and MODEL-05) to 60° (MODEL-03 and MODEL-06) and 50° (MODEL-04 and MODEL-07). For details on the experimental set-up, and interpretation of the results, please refer to Suárez et al. (submitted to Tectonophysics) to which these data are supplementary material.
Interferometric East and Up rate maps based on time-series analysis of ~5 years of Sentinel-1 radar data provide an unprecedented spatial (~400 m) resolution of the recend surface deformation of the Tajik fold-and-thrust-belt and the greater Pamir area. Among other the data exhibit E-W shortening in the fold-thrust-belt, slip activity of the Babadag thrust fault and the Ilyak strike-slip fault, westward Pamir escape tectonics, halokinesis and near-surface, water-driven effects. Observations and methodology are discussed at length in Metzger et al., 2021 (under Review).
This interactive webpage contains supplementary information for the publication by Jamalreyhani et al., 2020: Seismicity related to the eastern sector of Anatolian escape tectonics: A seismic gap partly filled by the 24 January 2020 Mw 6.8 Elazığ-Sivrice earthquake.
| Organisation | Count |
|---|---|
| Wissenschaft | 9 |
| Type | Count |
|---|---|
| unbekannt | 9 |
| License | Count |
|---|---|
| Offen | 9 |
| Language | Count |
|---|---|
| Englisch | 9 |
| Resource type | Count |
|---|---|
| Keine | 9 |
| Topic | Count |
|---|---|
| Boden | 6 |
| Lebewesen und Lebensräume | 3 |
| Luft | 1 |
| Mensch und Umwelt | 8 |
| Wasser | 3 |
| Weitere | 9 |