Compilation of downhole logging data from the borehole PTA2 inside Bradshaw Army Camp in the saddle region between Mauna Kea and Mauna Loa on the Big Island of Hawai'i (Composite OSG Logging Data Hawaii PTA2.asc, ASCII). The PTA2 borehole was fully cored into a lava dominated rock sequence; open hole bit size was HQ. The data were derived from the following logging runs in February and June 2016: GR total natural Gamma ray, SGR spectrum natural Gamma ray, MS magnetic susceptibility, BS borehole sonic, DIP dipmeter, and ABI43 acoustic borehole imager. All sondes were run in an open hole section below the casing shoe: 885 - 1566 m except for the SGR, which was also measured in the cased upper section and the ABI43, which also logged a 40 m long section inside the casing.The logging data are complemented by Acoustic borehole image data that were measured in June 2016 in the open hole section below the casing shoe: 889 - 1566 m; open hole bit size was HQ. Logging sonde: ABI43 (ALT). The images are oriented to north (magnetic orientation). File formats are DLIS and WCL (WellCAD 5.2). The data are further described in Jerram et al. (2019, https://doi.org/10.5194/sd-25-15-2019).The logging data was measured and processed by the Operational Support Group (OSG) of ICDP hosted by GFZ Potsdam (see https://www.icdp-online.org/support/service/downhole-logging/?type=12&tx_icdpdatatables_pi1%5Bajaxcall%5D=1 for further information). Detailed information about the OSG Slimhole Wireline Logging Sondes ist provided at https://www.icdp-online.org/fileadmin/icdp/services/img/Logging/OSG_Slimhole_Sondes_Specs_pics_2019-05.pdf. The data are also described in Jerram et al. (2019), Millet et al. (2017, 2018) and Willoughby, L. (2015). The file structure is described in the header of the data file.
The Sassen BF1 soil moisture station is part of an agrometeorological test site and aims at supplying environmental data for algorithm development in remote sensing and environmental modelling, with a focus on soil moisture and evapotranspiration.The site is intensively used for practical tests of remote sensing data integration in agricultural land management practices. First measurement infrastructure was installed by DLR in 1999 and instrumentation was intensified in 2011 and later as the site became part of the TERENO-NE observatory.
The soil moisture station station Sassen BF1 was installed in 2012. It is located next to a pylon on a crest of an undulating field. The station is equipped with sensor for measuring the following variables: ScemeSpadeSoilMoisture_Spade_2_Temperature, ScemeSpadeSoilMoisture_Spade_6_Temperature, ScemeSpadeSoilMoisture_Spade_1, ScemeSpadeSoilMoisture_Spade_2, ScemeSpadeSoilMoisture_Spade_3, ScemeSpadeSoilMoisture_Spade_4, ScemeSpadeSoilMoisture_Spade_5 and ScemeSpadeSoilMoisture_Spade_6.
The current version of this dataset is 1.5. This version includes two additional years of data (from-year to-year)and a revised version of the data flags. New authors were added for this new version: Alice Künzel (GFZ Potsdam), Christian Budach (GFZ Potsdam), Nils Brinckmann (GFZ Potsdam), Max Wegener (DLR Neustrelitz) and Klemens Schmidt (DLR Neustrelitz).A detailed overview on all changes is provided in the station description file. Older versions are available in the 'previous_versions' subfolder via the Data Download link. A first version of this data was provided under http://doi.org/ containing the measured data only.
The dataset is also available through the TERENO Data Discovery Portal. The datafile will be extended once per year as more data is acquired at the stations and the metadatafile will be updated. New columns for new variables will be added as necessary. In case of changes in data processing, which will result in changes of historical data, an new Version of this dataset will be published using a new doi. New data will be added after a delay of several months to allow manual interference with the quality control process.
During October 2020 a Bug in the published data was detected and a new version of the datasets was released from beginning until mid 2020.
Data processing was done using DMRP version: 1.8.4. Metadataprocessing was done using DMETA version: 1.2.0.