The SADL42 TTAAii Data Designators decode as: T1 (S): Surface data T1T2 (SA): Aviation routine reports A1A2 (DL): Germany (The bulletin collects reports from stations: ETSN;NEUBURG ;ETSA;LANDSBERG LECH ;ETSL;LECHFELD ;ETSB;BUCHEL ;ETSI;INGOLSTADT MANCHING ;ETNN;NORVENICH ;ETSE;ERDING ;)
The FCDL42 TTAAii Data Designators decode as: T1 (F): Forecast T1T2 (FC): Aerodrome (VT < 12 hours) A1A2 (DL): Germany (The bulletin collects reports from stations: ETSP;ETNP;ETSN;NEUBURG ;ETSL;LECHFELD ;ETSM;ETSB;BUCHEL ;ETSI;INGOLSTADT MANCHING ;ETNN;NORVENICH ;ETSE;ERDING ;)
The SPDL42 TTAAii Data Designators decode as: T1 (S): Surface data T1T2 (SP): Special aviation weather reports A1A2 (DL): Germany (The bulletin collects reports from stations: ETSN;NEUBURG ;ETSA;LANDSBERG LECH ;ETSL;LECHFELD ;ETSB;BUCHEL ;ETSI;INGOLSTADT MANCHING ;ETNN;NORVENICH ;) (Remarks from Volume-C: COMPILATION FOR REGIONAL EXCHANGE)
Mt. Etna in Catania, Italy, is an active volcano that has served as a natural laboratory for many volcanologists worldwide. Its paroxysms are unique eruptive events caused by a complex magmatic system that, despite being one of the most studied volcanoes, there is still an open field to contribute to the understanding of magma dynamics and degassing. This data set is a compilation of grain-size and shape measurements of 14 tephra samples of Mt. Etna. The tephra samples correspond to some of the most explosive cycles and events of the volcano from 2011 to 2025. The measurements were obtained using CAMSIZER through the ILGE TNA grant funding at INGV sezione di Catania. This dataset is the basis for a research project investigating the controls on the volume of gases and magma emitted during an eruption of Mt. Etna. This publication results from work conducted under the transnational access/national open access action at Sedimentology Laboratory – INGV sezione di Catania supported by WP3 ILGE - MEET project, PNRR - EU Next Generation Europe program, MUR grant number D53C22001400005.
The FCDL36 TTAAii Data Designators decode as: T1 (F): Forecast T1T2 (FC): Aerodrome (VT < 12 hours) A1A2 (DL): Germany (The bulletin collects reports from stations: ETMN;NORDHOLZ ;ETNL;ROSTOCK-LAAGE ;ETSI;INGOLSTADT MANCHING ;EDZO;)
The SADL36 TTAAii Data Designators decode as: T1 (S): Surface data T1T2 (SA): Aviation routine reports A1A2 (DL): Germany (The bulletin collects reports from stations: ETMN;NORDHOLZ ;ETNL;ROSTOCK-LAAGE ;ETSI;INGOLSTADT MANCHING ;EDZO;)
The LCDL36 TTAAii Data Designators decode as: T1 (L): Aviation Information in XML A1A2 (DL): Germany T1T2 (LC): Aerodrome Forecast ("TAF") (VT<12 hours)"(The bulletin collects reports from stations: ETMN;NORDHOLZ;ETNL;ROSTOCK-LAAGE;ETSI;INGOLSTADT MANCHING;ETHN;NIEDERSTETTEN;EDZO;)
The LADL36 TTAAii Data Designators decode as: T1 (L): Aviation Information in XML A1A2 (DL): Germany T1T2 (LA): Aviation routine reports ("METAR")(The bulletin collects reports from stations: ETMN;NORDHOLZ;ETNL;ROSTOCK-LAAGE;ETSI;INGOLSTADT MANCHING;ETHN;NIEDERSTETTEN;EDZO;)
In October 2021, GFZ installed together with INGV Catania, Iraci and ASIR Ltd (Advances Seismic Instrumentation & Research) the very first seismic borehole broadband seismometers at two selected sites at Mt. Etna, Sicily (see Fig. 1). The installation was completed under the EU-funded project ‘SiC nano for PicoGeo’ (http://www.picogeo.eu/). Site one is located next to the Astrophysical Observatory at Serra La Nave (SLN) and site two is located in the city of Mascalucia (MAS). At each site one borehole broadband seismometer was permanently installed (cemented) at approximately 70 m depth. In approx. 1-2m distance, a second ground-level borehole 4.5 Hz Geophone was temporarily installed (sanded) at 1 m depth until July 2022 (see Fig. 2). The ground-level geophones served as a local surface reference sensor to better evaluate the increase of signal quality from surface to depth. Test data were evaluated between October 2021 and July 2022. Sensor settings were adjusted during this time period to obtain the best possible data resolution at both test sites. This data publication compiles a segment of waveform recordings utilized for the assessment of data quality from the two installed broadband borehole seismometers, along with noise plots (Fig. 3-5) illustrating the enhancements in the data quality of frequency ranges compared to surface sensors at Mt. Etna.
Ausgangssituation/Problemstellung: Holzstoffe mit vergleichsweise hohen Festigkeiten und guten optischen Eigenschaften sind vor allem für Dünndruckpapiere geeignet. Diese Vorteile, verbunden mit der hohen Ausbeute von Holzstoffen machen Holzstoffe zu attraktiven Primärrohstoffen vor allem für Zeitungs- und Magazinpapiere. Der Einsparung von Holzressourcen durch die Nutzung von Hochausbeutefaserstoffe steht jedoch sowohl der hohe Energiebedarf als auch der hohe und steigende Energiepreis entgegen. Für stark fibrillierte Holzstoffe wird ein spezifischer Energiebedarf von mindestens 2 MWh/t benötigt. Mit dem hier untersuchten ETMP-Verfahren wird eine Netto-Energieeinsparung von 30 % bis 50 % angestrebt. Dies wird durch eine Bestrahlungsbehandlung der Holzhackschnitzel in Kombination mit einer Imprägnierung erreicht. Mit der Imprägnierung vor der Hackschnitzelbestrahlung soll zusätzlich eine gleichbleibende oder verbesserte Faserqualität erzielt werden. Forschungsziel/Forschungsergebnis: Das Projekt beweist sehr gut die Möglichkeit einer Implementierung von ETMP in eine bestehende TMP-Anlage. Mit einer Energieeinsparung von 30 % bei der TMP-Erzeugung würde die Papierindustrie einen wichtigen Schritt für die von der Politik geforderten ehrgeizigen Energieziele beitragen. Die Eigenschaften des Holzstoffs nach dem Großversuch sind mit unbehandelten Stoffen vergleichbar. Das hergestellte Papier konnte ohne Verlust in der Produktionsqualität verarbeitet und verkauft werden. Der Drucker konnte das Zeitungspapier erfolgreich bedrucken und seinerseits auf den Markt bringen. Anwendung/Wirtschaftliche Bedeutung: Durch den Einsatz des Verfahrens mit dem um ca. 100 GWh geringeren Energiebedarf in einer Papierfabrik werden die Emissionen von CO2, das als Treibhausgas zur Erderwärmung beiträgt, um jährlich ca. 51.000 Tonnen reduziert. Der Betreiber einer TMP-Anlage erhält mit dem Bau eines Bestrahlers die Möglichkeit, bei einer durchschnittlichen TMP-Anlage ca. 7 Mill. €/a an Betriebskosten zu sparen. Bei einer Investition von 10 Mill. € für den Bau einer solchen Anlage ergibt sich eine sehr günstige Investitionsgrundlage. Weitere Einsparungen sind darüber hinaus bei der Bleiche möglich, da während der Bestrahlung Ozon produziert wird, welches ein hervorragendes Bleichmittel darstellt und auch die Abwärme aus dem Kühlkreislauf des Bestrahlers kann zur Aufheizung des Prozesskreislaufes einer Papierfabrik genutzt werden. Die Bezifferung derartiger weiterer Einsparungen ist allerdings erst in weiteren angestrebten Langzeitversuchen möglich. Das Ziel ist es, ETMP in die Praxis einzuführen und dafür werden Mut und Investitionen seitens der Industrie dringend benötigt. Erste Verhandlungen verlaufen positiv, es fehlt aber noch ein großer Schritt zur Realisierung einer ersten Demonstratoranlage direkt in der Papierindustrie.
| Organisation | Count |
|---|---|
| Bund | 12 |
| Land | 7 |
| Wissenschaft | 4 |
| Zivilgesellschaft | 1 |
| Type | Count |
|---|---|
| Förderprogramm | 5 |
| unbekannt | 9 |
| License | Count |
|---|---|
| Offen | 7 |
| Unbekannt | 7 |
| Language | Count |
|---|---|
| Deutsch | 5 |
| Englisch | 10 |
| Resource type | Count |
|---|---|
| Keine | 6 |
| Webseite | 8 |
| Topic | Count |
|---|---|
| Boden | 2 |
| Lebewesen und Lebensräume | 13 |
| Luft | 10 |
| Mensch und Umwelt | 14 |
| Wasser | 4 |
| Weitere | 14 |