Other language confidence: 0.6256619855944769
Gridded Level 3 SO2 total column densities derived from the Metop/GOME-2-instruments. Volcanoes are the largest soures of SO2 in the atmosphere, depending on the erruption the Sulfurous compounds can be injected into stratosphere but in most cases it stays within the troposphere. Another important source is the coal combustion. Desulfurisation facilities within the power stations have reduced the sulfur emissions around the globe. In the stratosphere sulfur is a key component for building up aerosols, which reflect parts of the solar irradiation. The total SO2 column is retrieved from GOME solar back-scattered measurements in the ultraviolet wavelength region [using the DOAS method]. Depending on the plume SO2 can be a very strong absorber, because of that the ODAS retrieval might have some smaller issues, they can be reduced by choosing different wavelenght ranges depending on the signal. We apply three different fitting windows between 310 and 360nm. For the AMF, we assume a plumeheight of 6 km altitude. The Global Ozone Monitoring Experiment-2 (GOME-2) instrument continues the long-term monitoring of atmospheric trace gas constituents started with GOME / ERS-2 and SCIAMACHY / Envisat. Three instruments operate on board EUMETSAT's Meteorological Operational satellites MetOp-A, -B, and -C, launched in 2006, 2012, and 2018, respectively. GOME-2 measures a range of atmospheric trace constituents, with the emphasis on global ozone distribution. Furthermore, cloud properties and intensities of ultraviolet radiation are retrieved. These data are crucial for monitoring the atmospheric composition and the detection of pollutants. DLR generates operational GOME-2 / MetOp products in the framework of EUMETSAT's Satellite Application Facility on Atmospheric Composition Monitoring (AC-SAF).
Gidded Level 3 H2O total columns. The Earth's capacity to sustain life is attributed to two mechanisms: the greenhouse effect and the hydrological cycle. Water vapour in the atmosphere is a critical component of both processes and the main naturally occurring greenhouse gas in the Earth's climate system. Water in gaseous form varies more than other greenhouse gases. Monitoring atmospheric water vapour globally is essential to understand its climate impacts. Measurements of water vapor columns are derived from satellite observations of solar radiation in the ultraviolet and visible (430 – 450 nm) spectral ranges. A water vapour absorption band is detectable across some European Sentinel platforms (Sentinel-4, Sentinel-5P and 5), former (GOME and SCIAMACHY) and future instruments (CO2M). This absorption signature by water vapor is used to derive the shown concentrations with the Differential Optical Absorption Spectroscopy (DOAS) technique. The retrieval methodology, as applied to the fleet of available platforms, demonstrates several advantages, including optimal sensitivity and coverage characteristics across both oceans and continents, enhanced temporal sampling frequency for weather applications, and continuous extension of long-term datasets for climate study purposes. This is accomplished by DLR in the framework of the EUMETSAT's Satellite Application Facility on Atmospheric Composition (AC-SAF) monitoring where DLR generates operational GOME-2 / MetOp products.
Gridded Level 3 cloud fraction derived from Metop/GOME observations. Cloud physical properties (cloud fraction, cloud top height, cloud optical thickness) are derived from GOME/GOME-2 observations using the OCRA (Optical Cloud Recognition Algorithm) and ROCINN (Retrieval of Cloud Information using Neural Networks). For more details please refer to relevant peer-review papers listed on the GOME and GOME-2 documentation pages: https://atmos.eoc.dlr.de/app/docs/ The Global Ozone Monitoring Experiment-2 (GOME-2) instrument continues the long-term monitoring of atmospheric trace gas constituents started with GOME / ERS-2 and SCIAMACHY / Envisat. Three instruments operate on board EUMETSAT's Meteorological Operational satellites MetOp-A, -B, and -C, launched in 2006, 2012, and 2018, respectively. GOME-2 measures a range of atmospheric trace constituents, with the emphasis on global ozone distribution. Furthermore, cloud properties and intensities of ultraviolet radiation are retrieved. These data are crucial for monitoring the atmospheric composition and the detection of pollutants. DLR generates operational GOME-2 / MetOp products in the framework of EUMETSAT's Satellite Application Facility on Atmospheric Composition Monitoring (AC-SAF).
Gridded Level 3 formaldehyde (HCHO) column densities derived from the Metop/GOME-2-instruments. In the troposphere HCHO is a short-lived atmospheric constituent caused by incomplete combustion processes, e.g. fossil fuel consumption or biomass buring or it is build by atmospheric chemical species from other volatile organic component (VOCs). It plays an important role in the build up of tropospheric ozone. The total HCHO column is retrieved from GOME solar back-scattered measurements in the UV wavelength region 328.5nm to 346nm [using the DOAS method]. In addition, an air mass factor based on monthly climatological HCHO profiles is considered. The Global Ozone Monitoring Experiment-2 (GOME-2) instrument continues the long-term monitoring of atmospheric trace gas constituents started with GOME / ERS-2 and SCIAMACHY / Envisat. Three instruments operate on board EUMETSAT's Meteorological Operational satellites MetOp-A, -B, and -C, launched in 2006, 2012, and 2018, respectively. GOME-2 measures a range of atmospheric trace constituents, with the emphasis on global ozone distribution. Furthermore, cloud properties and intensities of ultraviolet radiation are retrieved. These data are crucial for monitoring the atmospheric composition and the detection of pollutants. DLR generates operational GOME-2 / MetOp products in the framework of EUMETSAT's Satellite Application Facility on Atmospheric Composition Monitoring (AC-SAF).
Gridded Level 3 cloud top pressure derived from Metop/GOME observations. Cloud physical properties (cloud fraction, cloud top height, cloud optical thickness) are derived from GOME/GOME-2 observations using the OCRA (Optical Cloud Recognition Algorithm) and ROCINN (Retrieval of Cloud Information using Neural Networks). For more details please refer to relevant peer-review papers listed on the GOME and GOME-2 documentation pages: https://atmos.eoc.dlr.de/app/docs/ The Global Ozone Monitoring Experiment-2 (GOME-2) instrument continues the long-term monitoring of atmospheric trace gas constituents started with GOME / ERS-2 and SCIAMACHY / Envisat. Three instruments operate on board EUMETSAT's Meteorological Operational satellites MetOp-A, -B, and -C, launched in 2006, 2012, and 2018, respectively. GOME-2 measures a range of atmospheric trace constituents, with the emphasis on global ozone distribution. Furthermore, cloud properties and intensities of ultraviolet radiation are retrieved. These data are crucial for monitoring the atmospheric composition and the detection of pollutants. DLR generates operational GOME-2 / MetOp products in the framework of EUMETSAT's Satellite Application Facility on Atmospheric Composition Monitoring (AC-SAF).
The AVHRR Mulitchannel Sea Surface Temperature Map (MCSST) was the first result of DLR's AVHRR pathfinder activities. The goal of the product is to provide the user with actual Sea Surface Temperature (SST) maps in a defined format easy to access with the highest possible reliability on the thematic quality. After a phase of definition, the operational production chain was launched in March 1993 covering the entire Mediterranean Sea and the Black Sea. Since then, daily, weekly, and monthly data sets have been available until September 13, 1994, when the AVHRR on board the NOAA-11 spacecraft failed. The production of daily, weekly and monthly SST maps was resumed in February, 1995, based on NOAA-14 AVHRR data. The NOAA-14 AVHRR sensor became some technical difficulties, so the generation was stopped on October 3, 2001. Since March 2002, NOAA-16 AVHRR SST maps are available again. With the beginning of January 2004, the data of AVHRR on board of NOAA-16 exhibited some anormal features showing strips in the scenes. Facing the “bar coded” images of NOAA16-AVHRR which occurred first in September 2003, continued in January 2004 for the second time and appeared in April 2004 again, DFD has decided to stop the reception of NOAA16 data on April 6th, 2004, and to start the reception of NOAA-17 data on this day. On April 7th, 2004, the production of all former NOAA16-AVHRR products as e.g. the SST composites was successully established. NOAA-17 is an AM sensor which passes central Europe about 2 hours earlier than NOAA-16 (about 10:00 UTC instead of 12:00 UTC for NOAA-16). In spring 2007, the communication system of NOAA-17 has degraded or is operating with limitations. Therefore, DFD has decided to shift the production of higher level products (NDVI, LST and SST) from NOAA-17 to NOAA-18 in April 2007. In order to test the performance of our processing chains, we processed simultaneously all NOAA-17 and NOAA-18 data from January 1st, 2007 till March 29th, 2007. All products are be available via EOWEB. Please remember that NOAA-18 is a PM sensor which passes central Europe about 1.5 hours later than NOAA-17 (about 11:30 UTC instead of 10:00 UTC for NOAA17). The SST product is intended for climate modelers, oceanographers, and all geo science-related disciplines dealing with ocean surface parameters. In addition, SST maps covering the North Atlantic, the Baltic Sea, the North Sea and the Western Atlantic equivalent to the Mediterranean MCSST maps are available since August 1994. The most important aspects of the MCSST maps are a) correct image registration and b) reasonable cloud screening to ensure that only cloud free pixels are taken for the later processing and compositing c) for deriving MCSST, only channel 4 and 5 are used.. The SST product consists of one 8 bit channel. For additional information, please see: https://wdc.dlr.de/sensors/avhrr/
Gridded Level 3 NO2 total (NO2 tropospheric) column densities derived from the Metop/GOME-2-instruments. In the troposphere NO2 is a short-lived atmospheric constituent caused by combustion processes, e.g. fossil fuel consumption or biomass buring or by lightning. In the troposphere as well as in the stratosphere NO2 plays an important role in the ozone chemistry. The total NO2 column is retrieved from GOME solar back-scattered measurements in the visible wavelength region around 440nm [using the DOAS method]. To derive tropospheric NO2 columns, the estimated stratospheric component is substracted from the total column. In addition, an air mass factor based on monthly climatological NO2 profiles is considered. The Global Ozone Monitoring Experiment-2 (GOME-2) instrument continues the long-term monitoring of atmospheric trace gas constituents started with GOME / ERS-2 and SCIAMACHY / Envisat. Three instruments operate on board EUMETSAT's Meteorological Operational satellites MetOp-A, -B, and -C, launched in 2006, 2012, and 2018, respectively. GOME-2 measures a range of atmospheric trace constituents, with the emphasis on global ozone distribution. Furthermore, cloud properties and intensities of ultraviolet radiation are retrieved. These data are crucial for monitoring the atmospheric composition and the detection of pollutants. DLR generates operational GOME-2 / MetOp products in the framework of EUMETSAT's Satellite Application Facility on Atmospheric Composition Monitoring (AC-SAF).
Gridded Level 3 tropospheric NO2 column densities derived from the Metop/GOME-2-instruments. In the troposphere NO2 is a short-lived atmospheric constituent caused by combustion processes, e.g. fossil fuel consumption or biomass buring or by lightning. NO2 plays an important role in the formation of ozone. The total NO2 column is retrieved from GOME solar back-scattered measurements in the visible wavelength region around 440nm [using the DOAS method]. To derive tropospheric NO2 columns, the estimated stratospheric component is substracted from the total column. In addition, an air mass factor based on monthly climatological NO2 profiles is considered. The Global Ozone Monitoring Experiment-2 (GOME-2) instrument continues the long-term monitoring of atmospheric trace gas constituents started with GOME / ERS-2 and SCIAMACHY / Envisat. Three instruments operate on board EUMETSAT's Meteorological Operational satellites MetOp-A, -B, and -C, launched in 2006, 2012, and 2018, respectively. GOME-2 measures a range of atmospheric trace constituents, with the emphasis on global ozone distribution. Furthermore, cloud properties and intensities of ultraviolet radiation are retrieved. These data are crucial for monitoring the atmospheric composition and the detection of pollutants. DLR generates operational GOME-2 / MetOp products in the framework of EUMETSAT's Satellite Application Facility on Atmospheric Composition Monitoring (AC-SAF).
Gridded Level 3 BrO total column densities derived from the Metop/GOME-2-instruments. In the troposphere BrO is a short-lived atmospheric constituent released from the sea (via algae or so called ice flowers). Also volcanic eruptions emit bromine compounds reacting to BrO. In the stratosphere, the major source of BrO are halogenated hydrocarbos that are destroyed by high energy UV radiation. In the stratosphere, BrO plays a key role in the ozone hole chemistry. The total BrO column is retrieved from GOME solar back-scattered measurements in the UV wavelength region between 332 and 359 nm [using the DOAS method]. The applied Airmassfactor is based on monthly climatologies. The Global Ozone Monitoring Experiment-2 (GOME-2) instrument continues the long-term monitoring of atmospheric trace gas constituents started with GOME / ERS-2 and SCIAMACHY / Envisat. Three instruments operate on board EUMETSAT's Meteorological Operational satellites MetOp-A, -B, and -C, launched in 2006, 2012, and 2018, respectively. GOME-2 measures a range of atmospheric trace constituents, with the emphasis on global ozone distribution. Furthermore, cloud properties and intensities of ultraviolet radiation are retrieved. These data are crucial for monitoring the atmospheric composition and the detection of pollutants. DLR generates operational GOME-2 / MetOp products in the framework of EUMETSAT's Satellite Application Facility on Atmospheric Composition Monitoring (AC-SAF).
Gridded Level 3 ozone column densities derived from the Metop/GOME-2-instruments. In the stratosphere – where the majority of the total O3 amount is located - O3 plays an vital role for the UV protection. In the troposphere O3 is generated by chemical processes caused by natural and anthropogenic emission of NO2 and volatile organic components (VOCs) (e.g. HCHO). Direct exposure to O3 is harmfull for humans and our environment. The total O3 column is retrieved from GOME solar back-scattered measurements in the uv wavelength region 325-335nm [using the DOAS method]. To determine the AMF an iterative process is applied, the assumed profile depends on the latitude, month, but also on the total column. The Global Ozone Monitoring Experiment-2 (GOME-2) instrument continues the long-term monitoring of atmospheric trace gas constituents started with GOME / ERS-2 and SCIAMACHY / Envisat. Three instruments operate on board EUMETSAT's Meteorological Operational satellites MetOp-A, -B, and -C, launched in 2006, 2012, and 2018, respectively. GOME-2 measures a range of atmospheric trace constituents, with the emphasis on global ozone distribution. Furthermore, cloud properties and intensities of ultraviolet radiation are retrieved. These data are crucial for monitoring the atmospheric composition and the detection of pollutants. DLR generates operational GOME-2 / MetOp products in the framework of EUMETSAT's Satellite Application Facility on Atmospheric Composition Monitoring (AC-SAF).
| Organisation | Count |
|---|---|
| Bund | 28 |
| Land | 28 |
| Wissenschaft | 28 |
| Type | Count |
|---|---|
| unbekannt | 28 |
| License | Count |
|---|---|
| Offen | 13 |
| Unbekannt | 15 |
| Language | Count |
|---|---|
| Englisch | 28 |
| Resource type | Count |
|---|---|
| Datei | 10 |
| Webseite | 28 |
| Topic | Count |
|---|---|
| Boden | 20 |
| Lebewesen und Lebensräume | 22 |
| Luft | 13 |
| Mensch und Umwelt | 28 |
| Wasser | 20 |
| Weitere | 28 |