Other language confidence: 0.9616824260713139
As part of PhytOakmeter (www.phytoakmeter.de), time-domain transmission, soil moisture and -temperature sensors with custom-made logger systems were used to measure time series of soil state variables. The aim of these investigations was to provide data on environmental properties used in a cross-disciplinary approach.The measurement device consisted of two sensors at three different depths. The dataset contains the values of time (UTC), relative permittivity, soil moisture (in % vol) derived from permittivity and soil temperature (in °C). Determination of soil moisture was done using the formula of Topp et al. (1980). As sensors, the SMT100 soil moisture sensors with integrated temperature measurement were used. All sensors were installed within the upper 50cm below ground. The exact depths for each sensor are listed in the dataset and parameter comment.
As part of PhytOakmeter (www.phytoakmeter.de), time-domain transmission, soil moisture and -temperature sensors with custom-made logger systems were used to measure time series of soil state variables. The aim of these investigations was to provide data on environmental properties used in a cross-disciplinary approach.The measurement device consisted of two sensors at three different depths. The dataset contains the values of time (UTC), relative permittivity, soil moisture (in % vol) derived from permittivity and soil temperature (in °C). Determination of soil moisture was done using the formula of Topp et al. (1980). As sensors, the SMT100 soil moisture sensors with integrated temperature measurement were used. All sensors were installed within the upper 50cm below ground. The exact depths for each sensor are listed in the dataset and parameter comment.
As part of PhytOakmeter (www.phytoakmeter.de), time-domain transmission, soil moisture and -temperature sensors with custom-made logger systems were used to measure time series of soil state variables. The aim of these investigations was to provide data on environmental properties used in a cross-disciplinary approach.The measurement device consisted of two sensors at three different depths. The dataset contains the values of time (UTC), relative permittivity, soil moisture (in % vol) derived from permittivity and soil temperature (in °C). Determination of soil moisture was done using the formula of Topp et al. (1980). As sensors, the SMT100 soil moisture sensors with integrated temperature measurement were used. All sensors were installed within the upper 50cm below ground. The exact depths for each sensor are listed in the dataset and parameter comment.
As part of PhytOakmeter (www.phytoakmeter.de), time-domain transmission, soil moisture and -temperature sensors with custom-made logger systems were used to measure time series of soil state variables. The aim of these investigations was to provide data on environmental properties used in a cross-disciplinary approach.The measurement device consisted of two sensors at three different depths. The dataset contains the values of time (UTC), relative permittivity, soil moisture (in % vol) derived from permittivity and soil temperature (in °C). Determination of soil moisture was done using the formula of Topp et al. (1980). As sensors, the SMT100 soil moisture sensors with integrated temperature measurement were used. All sensors were installed within the upper 50cm below ground. The exact depths for each sensor are listed in the dataset and parameter comment.
As part of PhytOakmeter (www.phytoakmeter.de), time-domain transmission, soil moisture and -temperature sensors with custom-made logger systems were used to measure time series of soil state variables. The aim of these investigations was to provide data on environmental properties used in a cross-disciplinary approach.The measurement device consisted of two sensors at three different depths. The dataset contains the values of time (UTC), relative permittivity, soil moisture (in % vol) derived from permittivity and soil temperature (in °C). Determination of soil moisture was done using the formula of Topp et al. (1980). As sensors, the SMT100 soil moisture sensors with integrated temperature measurement were used. All sensors were installed within the upper 50cm below ground. The exact depths for each sensor are listed in the dataset and parameter comment.
As part of the hydro-meteorological measurement campaign SwabianMOSES 2023 time-domain transmission soil moisture sensors and temperature sensors with custom-made logger systems were used to measure time series of these soil state variables. The aim of these investigations was to provide data on physical soil properties used in a cross-disciplinary approach for a better understanding of hydro-meteorological extremes (such as high precipitation events and droughts). Each measurement site consisted of sensors at three depths with two sensors each. Logger systems were installed at six different observation sites which were distributed across the whole campaign target area in the vicinity of the Swabian Jura in Germany. Decisions on the specific installation depths were made during the installation at the respective sites based on the constitution of the local soil profiles. Installation protocols with a brief soil profile description and photos are part of this dataset. The dataset contains the values of location and time (UTC), soil temperature (in °C), relative permittivity and soil moisture (in % vol) derived from permittivity. Determination of soil moisture was done using the formula of Topp et al. (1980). As sensors, the SMT100 soil moisture sensor with integrated temperature measurement were used. All sensors were installed within the upper 50cm below ground. The exact depths for each sensor are listed in the comments.
As part of PhytOakmeter (www.phytoakmeter.de), time-domain transmission, soil moisture and -temperature sensors with custom-made logger systems were used to measure time series of soil state variables. The aim of these investigations was to provide data on environmental properties used in a cross-disciplinary approach.The measurement device consisted of two sensors at three different depths. The dataset contains the values of time (UTC), relative permittivity, soil moisture (in % vol) derived from permittivity and soil temperature (in °C). Determination of soil moisture was done using the formula of Topp et al. (1980). As sensors, the SMT100 soil moisture sensors with integrated temperature measurement were used. All sensors were installed within the upper 50cm below ground. The exact depths for each sensor are listed in the dataset and parameter comment.
PhytOakmeter (www.phytoakmeter.de) is a field platform using the Quercus robur oak clone DF159 outplanted since 2010. This platform is used to monitor the impact of climate change and land use management on the "soil - plant - interactor" complex. Sites from PhytOakmeter are located either in forest or grassland habitats and represent a wide range of environmental contexts with specific stressors. All sites are equipped with loggers measuring air and soil temperature and soil moisture. Soil cores have been collected to analyze their chemical and physical characteristic. The DKr plot in Kreinitz (Germany) started in 2010 with 12 oak trees outplanted yearly between 2010 and 2019 over two 11m x 15m grassland plots. Soil temperature and soil moisture were measured between 2016 and 2025, and soil chemistry was assessed yearly in the root-affected zone of trees aged between one and five years. Soil porosity and texture were evaluated in 2020. The bundled publication is supplemented by recorded precipitation and weather data from an automatic weather station located on site.
As part of PhytOakmeter (www.phytoakmeter.de), time-domain transmission, soil moisture and -temperature sensors with custom-made logger systems were used to measure time series of soil state variables. The aim of these investigations was to provide data on environmental properties used in a cross-disciplinary approach. The measurement device consisted of two sensors at three different depths. The dataset contains the values of time (UTC), relative permittivity, soil moisture (in % vol) derived from permittivity and soil temperature (in °C). Determination of soil moisture was done using the formula of Topp et al. (1980). As sensors, the SMT100 soil moisture sensors with integrated temperature measurement were used. All sensors were installed within the upper 50cm below ground. The exact depths for each sensor are listed in the dataset and parameter comment.
Soil temperature at 15cm depth and air temperature at 60cm height were collected using HOBO Pro V2 loggers, model U23-004. Two loggers were used. After data visualization, unrealistic values were removed manually for each logger, and mean temperature values were calculated at 30-minute intervals.
| Organisation | Count |
|---|---|
| Wissenschaft | 73 |
| Type | Count |
|---|---|
| Daten und Messstellen | 73 |
| License | Count |
|---|---|
| Offen | 71 |
| Unbekannt | 2 |
| Language | Count |
|---|---|
| Englisch | 73 |
| Resource type | Count |
|---|---|
| Archiv | 2 |
| Datei | 71 |
| Topic | Count |
|---|---|
| Boden | 73 |
| Lebewesen und Lebensräume | 73 |
| Luft | 11 |
| Mensch und Umwelt | 73 |
| Wasser | 73 |
| Weitere | 73 |