API src

Found 10906 results.

Similar terms

s/hoc/DOC/gi

Model Output Statistics for Hof (10685)

DWD’s fully automatic MOSMIX product optimizes and interprets the forecast calculations of the NWP models ICON (DWD) and IFS (ECMWF), combines these and calculates statistically optimized weather forecasts in terms of point forecasts (PFCs). Thus, statistically corrected, updated forecasts for the next ten days are calculated for about 5400 locations around the world. Most forecasting locations are spread over Germany and Europe. MOSMIX forecasts (PFCs) include nearly all common meteorological parameters measured by weather stations. For further information please refer to: [in German: https://www.dwd.de/DE/leistungen/met_verfahren_mosmix/met_verfahren_mosmix.html ] [in English: https://www.dwd.de/EN/ourservices/met_application_mosmix/met_application_mosmix.html ]

Fließgewässermessstelle Luhe, Steg oh. Mdg. Naab, Luhe

Die Messstelle Luhe, Steg oh. Mdg. Naab (Messstellen-Nr: 6106) befindet sich im Gewässer Luhe in Bayern. Die Messstelle dient der Überwachung des biologischen Zustands, des chemischen Zustands, des Grundwasserstands im oberen Grundwasserstockwerk.

Fließgewässermessstelle Dietfurt KW-OW, Altmühl

Die Messstelle Dietfurt KW-OW (Messstellen-Nr: 4172) befindet sich im Gewässer Altmühl in Bayern. Die Messstelle dient der Überwachung des biologischen Zustands, des chemischen Zustands, des Grundwasserstands im oberen Grundwasserstockwerk.

Fließgewässermessstelle Straßenbrücke Obersdorf, Pegel, Rosenbach

Die Messstelle Straßenbrücke Obersdorf, Pegel (Messstellen-Nr: 7786) befindet sich im Gewässer Rosenbach in Bayern. Die Messstelle dient der Überwachung des biologischen Zustands, des chemischen Zustands, des Grundwasserstands im oberen Grundwasserstockwerk.

Grundwassermessstelle DEGM_DENW_100120015: BS 1 KNETTERHDE

Stammdaten und Analysedaten zu den Grundwassermessstellen im EUA-Messnetz: Messtelle DEGM_DENW_100120015 (BS 1 KNETTERHDE)

Oxygen consumption rate, organic carbon and grain size data for intertidal sediments and oxygen concentration of pore waters data of Spiekeroog Island North Beach, May 2022 to April 2023

The permeable sandy sediments of beach aquifers receive a high input of electron acceptors, such as oxygen (O2), as well as fresh organic matter through seawater infiltration, driving the biogeochemical turnover in the subterranean estuary. Here, we experimentally determined seasonal sedimentary O2 consumption rates of intertidal sediments along a transect in the seawater infiltration zone at Spiekeroog Island North Beach, Germany, and present the data together with measurements of organic carbon and grain sizes, oxygen concentration of pore waters and beach topography. The samples were taken down to 1 m depth during two-monthly sampling campaigns from May 2022 to April 2023. Preliminary investigations of O2 consumption rates took place in in March, June and August 2017. Sediment and porewater sampling procedures were carried out as described by Massmann et al. (2023). O2 consumption rates were determined in slurry incubations of the retrieved sediments using gas tight vials (Labco Exetainer® 12 ml) equipped with O2 sensor spots (Pyroscience, OXSP5). Incubations were carried out in the dark at in situ temperatures, and vials were mounted on a rotating wheel to mimic porewater advection. The sediment's total organic carbon content was determined in a CS analyser (Eltra CS 800). Additionally, the fine fraction of the sediment was washed out and the organic carbon content of the fine sediments was measured in a CHNSO analyser (Hekatech Euro EA). The grain size distribution of the sediments was detemined using dynamic image analysis (Sympatec QICPIC). The O2 concentration in the pore water along the transect was measured immediately after the sample was taken using a flow-through oxygen optode (Pyroscience, OXFTC). The data was collected to investigate the impact of seasonal inputs and filtration efficiency on the O2 consumption during seawater infiltration into the permeable sands of beach aquifers.

Organic parameters obtained from Röttingen core

The total carbon (TC), total organic carbon (TOC), and total sulfur (TS) were determined using a LECO CS-230 system (Laboratory Equipment Corporation). Samples were heated up to 2000 °C under an oxygen atmosphere and an infrared detector subsequently measured the amount of produced CO₂ and SO₂. TOC was measured the same way after removing inorganic carbonates using 10 % HCl solution at 80 °C. Rock-Eval Pyrolyses were performed on a Rock-Eval-6 analyser (Vinci Technologies) using up to 180 mg initial sample material and a standard program (Espitalié et al., 1977; Lafargue et al., 1998), starting isothermal with 300°C for 3 min, succeeded by a heating rate of 25°C/min up to 650°C. Standard deviations for hydrogen indices (HI) and Tmax values are ± 5 % and ± 2°C, respectively.

Organic parameters obtained from Metzingen core

The total carbon (TC), total organic carbon (TOC), and total sulfur (TS) were determined using a LECO CS-230 system (Laboratory Equipment Corporation). Samples were heated up to 2000 °C under an oxygen atmosphere and an infrared detector subsequently measured the amount of produced CO₂ and SO₂. TOC was measured the same way after removing inorganic carbonates using 10 % HCl solution at 80 °C. Rock-Eval Pyrolyses were performed on a Rock-Eval-6 analyser (Vinci Technologies) using up to 180 mg initial sample material and a standard program (Espitalié et al., 1977; Lafargue et al., 1998), starting isothermal with 300°C for 3 min, succeeded by a heating rate of 25°C/min up to 650°C. Standard deviations for hydrogen indices (HI) and Tmax values are ± 5 % and ± 2°C, respectively.

Clay and heavy minerals and total organic carbon in Arctic Ocean surface sediments – Data tables to distribution maps of Stein (2008)

Total organic carbon (TOC) and mineral assemblages are key data sets determined to characterize marine sediments in terms of sediment provenances, processes, and depositional environments. In a comprehensive review and synthesis (Stein, 2008), such data were compiled for Arctic Ocean surface sediments and shown in nine selected distribution maps: four maps of clay minerals (illite, smectite, chlorite, and kaolinite), four maps of heavy minerals (amphibole, clinopyroxene, epidote, and garnet), and one TOC map. The data used to produce these maps, are represented in the three tables of this data report. For details in background information and methodology see primary source literature cited here as well as the Stein (2008) synthesis.

Sentinel-5P TROPOMI Surface Nitrogendioxide (NO2), Level 4 – Regional (Germany and neighboring countries)

The TROPOMI instrument onboard the Copernicus SENTINEL-5 Precursor satellite is a nadir-viewing, imaging spectrometer that provides global measurements of atmospheric properties and constituents on a daily basis. It is contributing to monitoring air quality and climate, providing critical information to services and decision makers. The instrument uses passive remote sensing techniques by measuring the top of atmosphere solar radiation reflected by and radiated from the earth and its atmosphere. The four spectrometers of TROPOMI cover the ultraviolet (UV), visible (VIS), Near Infra-Red (NIR) and Short Wavelength Infra-Red (SWIR) domains of the electromagnetic spectrum. The operational trace gas products generated at DLR on behave ESA are: Ozone (O3), Nitrogen Dioxide (NO2), Sulfur Dioxide (SO2), Formaldehyde (HCHO), Carbon Monoxide (CO) and Methane (CH4), together with clouds and aerosol properties. This product displays the Nitrogen Dioxide (NO2) near surface concentration for Germany and neighboring countries as derived from the POLYPHEMUS/DLR air quality model. Surface NO2 is mainly generated by anthropogenic sources, e.g. transport and industry. POLYPHEMUS/DLR is a state-of-the-art air quality model taking into consideration - meteorological conditions, - photochemistry, - anthropogenic and natural (biogenic) emissions, - TROPOMI NO2 observations for data assimilation. This Level 4 air quality product (surface NO2 at 15:00 UTC) is based on innovative algorithms, processors, data assimilation schemes and operational processing and dissemination chain developed in the framework of the INPULS project. The DLR project INPULS develops (a) innovative retrieval algorithms and processors for the generation of value-added products from the atmospheric Copernicus missions Sentinel-5 Precursor, Sentinel-4, and Sentinel-5, (b) cloud-based (re)processing systems, (c) improved data discovery and access technologies as well as server-side analytics for the users, and (d) data visualization services.

1 2 3 4 5 … 1089 1090 1091