API src

Found 7 results.

Other language confidence: 0.7806025802494495

Digital image correlation data from laboratory subduction megathrust models

This data set includes digital image correlation data from analog earthquakes experiments. The data consists of grids of surface strain and time series of surface displacement (horizontal and vertical) and strain. The data have been derived using a stereo camera setup and processed with LaVision Davis 10 software. Detailed descriptions of the experiments and results regarding the surface pattern of the strain can be found in Kosari et al. (2022), to which this data set is supplementary. We use an analog seismotectonic scale model approach (Rosenau et al., 2019 and 2017) to generate a catalog of analog megathrust earthquakes (Table 1). The presented experimental setup is modified from the 3D setup used in Rosenau et al. (2019) and Kosari et al. ( 2020). The subduction forearc model wedge is set up in a glass-sided box (1000 mm across strike, 800mm along strike, and 300 mm deep) with a dipping, elastic basal conveyor belt and a rigid backwall. An elastoplastic sand-rubber mixture (50 vol.% quartz sandG12: 50 vol.% EPDM rubber) is sieved into the setup representing a 240 km long forearc segment from the trench to the volcanic arc. The shallow part of the wedge includes a basal layer of sticky rice grains characterized by unstable stick-slip sliding representing the seismogenic zone. Stick-slip sliding in rice is governed by a rate-and-state dependent friction law similar to natural rocks. According to Coulomb wedge theory (Dahlen et al., 1984), two types of wedge configurations have been designed: a “compressional” configuration represents an interseismically compressional and coseismically stable wedge (compressional configuration), and a “critical” configuration, which is interseismically stable (close to critically compressional) and may reach a critical extensional state coseismically (critical configuration). In the compressional configuration, a flat-top (surface slope α=0) wedge overlies a single large rectangular in map view stick-slip patch (Width*Length=200*800 mm) over a 15-degree dipping basal thrust. In the critical configuration, the surface angle of the elastoplastic wedge varies from the coastal segment onshore (α=10) to the inner-wedge offshore (α=15) segments over a 5-degree dipping basal thrust. Slow continuous compression of the wedge by moving the basal conveyor belt at a speed velocity of 0.05 mm/s simulates plate convergence and results in the quasi-periodic nucleation of quasi-periodic stick-slip events (analog earthquakes) within the rice layer. The wedge responds elastically to these basal slip events, similar to crustal rebound during natural subduction megathrust earthquakes.

High-speed digital image correlation data from laboratory subduction megathrust models

This data set includes data derived from high-speed surface displacement observations from analog earthquake experiments. The data consists of surface displacement of the experiment upper plate and slab, slip distribution, and grids of Coulomb Failure Stress (CFS). The surface displacement observations have been captured using a highspeed CMOS (Complementary Metal Oxide Semiconductor) camera (Phantom VEO 640L camera, 12 bit) and processed with LaVision Davis 10 software. Description of the experiments and results regarding the surface displacement observation, Slip distribution, and CFS can be found in Kosari et al. (2022), to which this data set is supplementary. We use an analog seismotectonic scale model approach (Rosenau et al., 2019 and 2017) to generate a catalog of analog megathrust earthquakes. The presented experimental setup is modified from the 3D setup used in Rosenau et al. (2019) and Kosari et al. ( 2020 and 2022). The subduction forearc model wedge is set up in a glass-sided box (1000 mm across strike, 800mm along strike, and 300 mm deep) with a dipping, elastic basal conveyor belt, and a rigid backwall. An elastoplastic sand-rubber mixture (50 vol.% quartz sandG12: 50 vol.% EPDM rubber) is sieved into the setup representing a 240 km long forearc segment from the trench to the volcanic arc. The shallow part of the wedge includes a basal layer of sticky rice grains characterized by unstable stick-slip sliding representing the seismogenic zone. The Stick-slip sliding in rice is governed by a rate-and-state dependent friction law similar to natural rocks. A flat-top (surface slope α=0) wedge overlies rectangular stick-slip patch/es over a 15-degree dipping basal thrust. Two different seismic configurations of the shallow part of the wedge base (the megathrust) represent the depth extent of the seismogenic zone in nature. In the first configuration (homogeneous configuration), a single large rectangular stick-slip patch (Width*Length=200*800 mm) is implemented as the main slip patch (MSP). In the second case (heterogeneous configuration), two square-shaped MSPs (200*200mm) have been emplaced, acting as two medium-size seismogenic asperities surrounded by a salt matrix hosting frequent small events. Slow continuous compression of the wedge by moving the basal conveyor belt at a speed velocity of 0.05 mm/s simulates plate convergence and results in the quasi-periodic nucleation of quasi-periodic stick-slip events (analog earthquakes) within the sticky-rice layer. The wedge responds elastically to these basal slip events, similar to crustal rebound during natural subduction megathrust earthquakes.

Digital image correlation data from analogue subduction megathrust earthquakes addressing the control of geodetic coverage on coseismic slip inversion

This data set includes digital image correlation data from thirteen analogue earthquakes generated by means of an analogue seismotectonic scale model approach. The data consists of grids of 3D static coseismic surface displacements. The data have been derived using a stereo camera setup and processed with LaVision Davis 8 software. Detailed descriptions of the experiments and results regarding the control of geodetic coverage on the slip inversion problem can be found in Kosari et al. (2020) to which this data set is supplementary material. We use an analogue seismotectonic scale model approach (Rosenau et al., 2017) to generate a catalogue of analogue megathrust earthquakes (Table 1). The presented experimental setup is modified from the 3D setup used in Rosenau et al. (2019). To monitor surface deformation of the wedge analogue model a stereoscopic set of two CCD cameras (LaVision Imager pro X 11MPx, 14 bit) monitors images the wedge surface continuously at 2.5 Hz. To derive observational data similar to those from geodetic techniques, i.e. velocities at the location on the surface, we use digital image correlation (DIC, Adam et al., 2005) to derive the 3D incremental surface displacement (or velocity) at high spatial resolution (< 0.1 mm). The time series of incremental surface displacement data was calculated using LaVision Davis 8 software. The result is an evenly spaced grid of vectors per time step, oriented parallel with respect to the principal dimensions of the box.

Surface deformation and topography data from analogue modelling experiments addressing triaxial tectonics in regions of distributed extension

This data set includes the results of high-resolution digital elevation models (DEM) and digital image correlation (DIC) analysis applied to analogue modelling experiments. Twenty generic analogue models are extended on top of a rubber sheet. Two benchmark experiments are also reported. Detailed descriptions of the experiments can be found in Liu et al. (submitted) to which this data set is supplement. The data presented here are visualized as topography and the horizontal cumulative surface strain (principal strain and slip rake).

Results of analogue tectonic models of rifting and tectonic lineament reactivation along the Main Ethiopian Rift

This data set includes results from a total of 13 analogue tectonic models aimed at simulating the activation of tectonic lineaments associated with the Main Ethiopian Rift in eastern Africa. We use a model set-up based on previous work by Zwaan et al. (2021, 2022). This set-up involves a velocity discontinuity (VD, i.e., the edge of a mobile base plate) to induce extension in the overlying brittle- and viscous model materials representing the upper and lower crust, respectively. Additional structural weaknesses (seeds) at the base of the brittle layer serve to represent activated tectonic weaknesses in nature. Model parameters (different VD and seed orientation, and different seed diameters) are summarized in Table 1. The model results presented in this data publication are obtained through Digital Image Correlation (DIC) and Structure-from-Motion (SfM) analyses. A more detailed description of model set-up, model results, and their interpretation can be found in Zwaan et al. (2025)

Laboratory model data from experiments on fragmenting analogue rock avalanches

This data set includes various laboratory model data derived from analogue rock avalanche experiments on the role of fragmentation on runout behavior. Detailed descriptions of the experiments and monitoring and analysis techniques can be found in Haug et al. (submitted) to which this data set is supplementary. The data presented here consist of movies showing key avalanche experiments and kinematic data characterizing the runout behavior derived from 157 experiments.

Supplement to: The influence of detachment strength on the evolving deformational energy budget of physical accretionary prisms

Tracking the evolution of the deformational energy budget within accretionary systems provides insight into the driving mechanisms that control fault development. To quantify the impact of these mechanisms on overall system efficiency, we estimate energy budget components as the first thrust fault pair develops in dry-sand accretion analogue experiments.This data set includes photos taken and forces measured in four experiments performed at Université de Cergy-Pontoise in October-November 2016. The experiments are described in McBeck et al. (submitted).The data are organized into 5 main folders, with the following contents:1) E373_photos: Contains 3 subfolders: droit_RDY, gauche_RDY, haut_RDY. Each subfolder contains images taken at 1 second intervals throughout experiment. droit_RDY, gauche_RDY, and haut_RDY contain photos of the right, left, and top of the sandpack.2) E374_photos: Same organization and contents of folder E373_photos3) E375_photos: Same organization and contents of folder E373_photos4) E376_photos: Same organization and contents of folder E373_photos5) forces: Contains text files that list the normal force against the backwall (N) and total applied normal displacement to the backwall (mm) in the second and first columns, respectively. The filename indicates which experiment the text file describes.

1