technologyComment of gold mine operation and refining (SE): OPEN PIT MINING: The ore is mined in four steps: drilling, blasting, loading and hauling. In the case of a surface mine, a pattern of holes is drilled in the pit and filled with explosives. The explosives are detonated in order to break up the ground so large shovels or front-end loaders can load it into haul trucks. ORE AND WASTE HAULAGE: The haul trucks transport the ore to various areas for processing. The grade and type of ore determine the processing method used. Higher-grade ores are taken to a mill. Lower grade ores are taken to leach pads. Some ores may be stockpiled for later processing. HEAP LEACHING: The ore is crushed or placed directly on lined leach pads where a dilute cyanide solution is applied to the surface of the heap. The solution percolates down through the ore, where it leaches the gold and flows to a central collection location. The solution is recovered in this closed system. The pregnant leach solution is fed to electrowinning cells and undergoes the same steps as described below from Electro-winning. ORE PROCESSING: Milling: The ore is fed into a series of grinding mills where steel balls grind the ore to a fine slurry or powder. Oxidization and leaching: Some types of ore require further processing before gold is recovered. In this case, the slurry is pressure-oxidized in an autoclave before going to the leaching tanks or a dry powder is fed through a roaster in which it is oxidized using heat before being sent to the leaching tanks as a slurry. The slurry is thickened and runs through a series of leaching tanks. The gold in the slurry adheres to carbon in the tanks. Stripping: The carbon is then moved into a stripping vessel where the gold is removed from the carbon by pumping a hot caustic solution through the carbon. The carbon is later recycled. Electro-winning: The gold-bearing solution is pumped through electro-winning cells or through a zinc precipitation circuit where the gold is recovered from the solution. Smelting: The gold is then melted in a furnace at about 1’064°C and poured into moulds, creating doré bars. Doré bars are unrefined gold bullion bars containing between 60% and 95% gold. References: Newmont (2004) How gold is mined. Newmont. Retrieved from http://www.newmont.com/en/gold/howmined/index.asp technologyComment of primary lead production from concentrate (GLO): There are two basic pyrometallurgical processes available for the production of lead from lead or mixed lead-zinc-sulphide concentrates: sinter oxidation / blast furnace reduction route or Direct Smelting Reduction Processes. Both processes are followed by a refining step to produce the final product with the required purity, and may also be used for concentrates mixed with secondary raw materials. SINTER OXIDATION / BLAST FURNACE REDUCTION: The sinter oxidation / blast furnace reduction involves two steps: 1) A sintering oxidative roast to remove sulphur with production of PbO; and 2) Blast furnace reduction of the sinter product. The objective of sintering lead concentrates is to remove as much sulphur as possible from the galena and the accompanying iron, zinc, and copper sulphides, while producing lump agglomerate with appropriate properties for subsequent reduction in the blast furnace (a type of a shaft furnace). As raw material feed, lead concentrates are blended with recycled sinter fines, secondary material and other process materials and pelletised in rotating drums. Pellets are fed onto sinter machine and ignited. The burning pellets are conveyed over a series of wind-boxes through which air is blown. Sulphur is oxidised to sulphur dioxide and the reaction generates enough heat to fuse and agglomerate the pellets. Sinter is charged to the blast furnace with metallurgical coke. Air and/or oxygen enriched air is injected and reacts with the coke to produce carbon monoxide. This generates sufficient heat to melt the charge. The gangue content of the furnace charge combines with the added fluxes or reagents to form a slag. For smelting bulk lead-zinc-concentrates and secondary material, frequently the Imperial Smelting Furnace is used. Here, hot sinter and pre-heated coke as well as hot briquettes are charged. Hot air is injected. The reduction of the metal oxides not only produces lead and slag but also zinc, which is volatile at the furnace operating temperature and passes out of the ISF with the furnace off-gases. The gases also contain some cadmium and lead. The furnace gases pass through a splash condenser in which a shower of molten lead quenches them and the metals are absorbed into the liquid lead, the zinc is refined by distillation. DIRECT SMELTING REDUCTION: The Direct Smelting Reduction Process does not carry out the sintering stage separately. Lead sulphide concentrates and secondary materials are charged directly to a furnace and are then melted and oxidised. Sulphur dioxide is formed and is collected, cleaned and converted to sulphuric acid. Carbon (coke or gas) and fluxing agents are added to the molten charge and lead oxide is reduced to lead, a slag is formed. Some zinc and cadmium are “fumed” off in the furnace, their oxides are captured in the abatement plant and recovered. Several processes are used for direct smelting of lead concentrates and some secondary material to produce crude lead and slag. Bath smelting processes are used: the ISA Smelt/Ausmelt furnaces (sometimes in combination with blast furnaces), Kaldo (TBRC) and QSL integrated processes are used in EU and Worldwide. The Kivcet integrated process is also used and is a flash smelting process. The ISA Smelt/Ausmelt furnaces and the QSL take moist, pelletised feed and the Kaldo and Kivcet use dried feed. REFINING: Lead bullion may contain varying amounts of copper, silver, bismuth, antimony, arsenic and tin. Lead recovered from secondary sources may contain similar impurities, but generally antimony and calcium dominate. There are two methods of refining crude lead: electrolytic refining and pyrometallurgical refining. Electrolytic refining uses anodes of de-copperised lead bullion and starter cathodes of pure lead. This is a high-cost process and is used infrequently. A pyrometallurgical refinery consists of a series of kettles, which are indirectly heated by oil or gas. Over a series of separation processes impurities and metal values are separated from the lead bouillon. Overall waste: The production of metals is related to the generation of several by-products, residues and wastes, which are also listed in the European Waste Catalogue (Council Decision 94/3/EEC). The ISF or direct smelting furnaces also are significant sources of solid slag. This slag has been subjected to high temperatures and generally contains low levels of leachable metals, consequently it may be used in construction. Solid residues also arise as the result of the treatment of liquid effluents. The main waste stream is gypsum waste (CaSO4) and metal hydroxides that are produced at the wastewater neutralisation plant. These wastes are considered to be a cross-media effect of these treatment techniques but many are recycled to pyrometallurgical process to recover the metals. Dust or sludge from the treatment of gases are used as raw materials for the production of other metals such as Ge, Ga, In and As, etc or can be returned to the smelter or into the leach circuit for the recovery of lead and zinc. Hg/Se residues arise at the pre-treatment of mercury or selenium streams from the gas cleaning stage. This solid waste stream amounts to approximately 40 - 120 t/y in a typical plant. Hg and Se can be recovered from these residues depending on the market for these metals. Overall emissions: The main emissions to air from zinc and lead production are sulphur dioxide, other sulphur compounds and acid mists; nitrogen oxides and other nitrogen compounds, metals and their compounds; dust; VOC and dioxins. Other pollutants are considered to be of negligible importance for the industry, partly because they are not present in the production process and partly because they are immediately neutralised (e.g. chlorine) or occur in very low concentrations. Emissions are to a large extent bound to dust (except cadmium, arsenic and mercury that can be present in the vapour phase). Metals and their compounds and materials in suspension are the main pollutants emitted to water. The metals concerned are Zn, Cd, Pb, Hg, Se, Cu, Ni, As, Co and Cr. Other significant substances are fluorides, chlorides and sulphates. Wastewater from the gas cleaning of the smelter and fluid-bed roasting stages are the most important sources. References: Sutherland C. A., Milner E. F., Kerby R. C., Teindl H. and Melin A. (1997) Lead. In: Ullmann's encyclopedia of industrial chemistry (ed. Anonymous). 5th edition on CD-ROM Edition. Wiley & Sons, London. IPPC (2001) Integrated Pollution Prevention and Control (IPPC); Reference Document on Best Available Techniques in the Non Ferrous Metals Industries. European Commission. Retrieved from http://www.jrc.es/pub/english.cgi/ 0/733169 technologyComment of primary zinc production from concentrate (RoW): The technological representativeness of this dataset is considered to be high as smelting methods for zinc are consistent in all regions. Refined zinc produced pyro-metallurgically represents less than 5% of global zinc production and less than 2% of this dataset. Electrometallurgical Smelting The main unit processes for electrometallurgical zinc smelting are roasting, leaching, purification, electrolysis, and melting. In both electrometallurgical and pyro-metallurgical zinc production routes, the first step is to remove the sulfur from the concentrate. Roasting or sintering achieves this. The concentrate is heated in a furnace with operating temperature above 900 °C (exothermic, autogenous process) to convert the zinc sulfide to calcine (zinc oxide). Simultaneously, sulfur reacts with oxygen to produce sulfur dioxide, which is subsequently converted to sulfuric acid in acid plants, usually located with zinc-smelting facilities. During the leaching process, the calcine is dissolved in dilute sulfuric acid solution (re-circulated back from the electrolysis cells) to produce aqueous zinc sulfate solution. The iron impurities dissolve as well and are precipitated out as jarosite or goethite in the presence of calcine and possibly ammonia. Jarosite and goethite are usually disposed of in tailing ponds. Adding zinc dust to the zinc sulfate solution facilitates purification. The purification of leachate leads to precipitation of cadmium, copper, and cobalt as metals. In electrolysis, the purified solution is electrolyzed between lead alloy anodes and aluminum cathodes. The high-purity zinc deposited on aluminum cathodes is stripped off, dried, melted, and cast into SHG zinc ingots (99.99 % zinc). Pyro-metallurgical Smelting The pyro-metallurgical smelting process is based on the reduction of zinc and lead oxides into metal with carbon in an imperial smelting furnace. The sinter, along with pre-heated coke, is charged from the top of the furnace and injected from below with pre-heated air. This ensures that temperature in the center of the furnace remains in the range of 1000-1500 °C. The coke is converted to carbon monoxide, and zinc and lead oxides are reduced to metallic zinc and lead. The liquid lead bullion is collected at the bottom of the furnace along with other metal impurities (copper, silver, and gold). Zinc in vapor form is collected from the top of the furnace along with other gases. Zinc vapor is then condensed into liquid zinc. The lead and cadmium impurities in zinc bullion are removed through a distillation process. The imperial smelting process is an energy-intensive process and produces zinc of lower purity than the electrometallurgical process. technologyComment of treatment of electronics scrap, metals recovery in copper smelter (SE, RoW): Conversion of Copper in a Kaldo Converter and treatment in converter aisle. technologyComment of treatment of scrap lead acid battery, remelting (RoW): The referred operation uses a shaft furnace with post combustion, which is the usual technology for secondary smelters. technologyComment of treatment of scrap lead acid battery, remelting (RER): The referred operation uses a shaft furnace with post combustion, which is the usual technology for secondary smelters. Typically this technology produces 5000 t / a sulphuric acid (15% concentration), 25’000 t lead bullion (98% Pb), 1200 t / a slags (1% Pb) and 3000 t / a raw lead matte (10% Pb) to be shipped to primary smelters. Overall Pb yield is typically 98.8% at the plant level and 99.8% after reworking the matte. The operation treats junk batteries and plates but also lead cable sheathing, drosses and sludges, leaded glass and balancing weights. From this feed it manufactures mainly antimonial lead up to 10% Sb, calcium-aluminium lead alloys with or without tin and soft lead with low and high copper content. All these products are the result of a refining and alloying step to meet the compliance with the designations desired. The following by products are reused in the process: fine dust, slag, and sulfuric acid. References: Quirijnen L. (1999) How to implement efficient local lead-acid battery recycling. In: Journal of Power Sources, 78(1-2), pp. 267-269.
technologyComment of platinum group metal mine operation, ore with high palladium content (RU): imageUrlTagReplace6250302f-4c86-4605-a56f-03197a7811f2 technologyComment of platinum group metal, extraction and refinery operations (ZA): The ores from the different ore bodies are processed in concentrators where a PGM concentrate is produced with a tailing by product. The PGM base metal concentrate product from the different concentrators processing the different ores are blended during the smelting phase to balance the sulphur content in the final matte product. Smelter operators also carry out toll smelting from third part concentrators. The smelter product is send to the Base metal refinery where the PGMs are separated from the Base Metals. Precious metal refinery is carried out on PGM concentrate from the Base metal refinery to split the PGMs into individual metal products. Water analyses measurements for Anglo Platinum obtained from literature (Slatter et.al, 2009). Mudd, G., 2010. Platinum group metals: a unique case study in the sustainability of mineral resources, in: The 4th International Platinum Conference, Platinum in Transition “Boom or Bust.” Water share between MC and EC from Mudd (2010). Mudd, G., 2010. Platinum group metals: a unique case study in the sustainability of mineral resources, in: The 4th International Platinum Conference, Platinum in Transition “Boom or Bust.” technologyComment of treatment of automobile catalyst (RoW): After collection and transportation to the intermediary dealer, the scrap is ground in a mill. The resulting material is fed to specialised refineries. The metallurgical step consists of an arc-furnace. Same refining process as in primary production assumed (selective precipitation) technologyComment of treatment of automobile catalyst (RER): The production process consists of three steps: Collection, Beneficiation and Refining. COLLECTION: Spoiled automotive catalysts are bought by specialised enterprises from different origins. Part of it originates from scrap dealer recycling end-of-life cars. Further more during the cars operating phase, defective catalysts are exchanged in garages. The third sources is the production waste, i. e. defective catalysts which do not reach market. In most cases, there are fix agreements between the different supplier and the intermediary trade. Although the trade with PGM containing scrap is risky. Motor car manufacturer built up their own internal recycling systems with their contractor garages and gained access to exchanged catalysts. Emissions: Emissions during collection are gases from transportation and dust from dismantling. Also in this step the combustion leads to emissions of SO2. No serious water emissions are reported. BENEFICIATION: The catalysts are dismantled and then sold to refining companies. Refineries too have long-term contracts with the intermediary trade. Emissions: Emissions during beneficiation are gases from transportation and dust from dismantling. Also in this step the combustion leads to emissions of SO2. No serious water emissions are reported. REFINING: The scrap first is shredded and then pyrometallurgicaly processed: The scrap is smelted in an electric arc furnace, and the ceramic wafer is slagged. The PGMs are concentrated in the collector metal, usually copper. Low-content PGM scrap is often smelted together with other non-ferrous metal matte. This is cheap, but effects a high loss in PGM. The collector matte from the furnace then is treated hydrometallurgically by re-precipitation. In this step usually production scrap from other industries (glass, chemical laboratories) is joined. The overall PGM-yield is 98 % for platinum and 85 % for rhodium. Emissions: Dust and metals are generally emitted from incinerators and furnaces. VOC can be emitted from solvent extraction processes, while organic compounds, namely dioxins, can be emitted from smelting stages resulting from the poor combustion of oil and plastic in the feed material. All these emissions are subject to abatement technologies and controlling. Effluents from refining contain considerable amounts of metals and organic substances. Waste: Solid residues from pyrometallurgical step are usually re-used in copper facilities, final residues generally comprise hydroxide filter cakes. References: Hagelücken C. (2001b) Die Märkte der Katalysatormetalle Platin, Palladium und Rhodium. In: Autoabgaskatalysatoren, Vol. 612. pp. 95-115. Expert Verlag, Renningen. Online-Version under: http://www.dmc-2.de/pmc_eng/Veroeffentlichungen_2/Die%20M%C3%A4rkte%20der%20Katalysatormetalle%20Pt%20Pd%20Rh.pdf.
technologyComment of cobalt production (GLO): Cobalt, as a co-product of nickel and copper production, is obtained using a wide range of technologies. The initial life cycle stage covers the mining of the ore through underground or open cast methods. The ore is further processed in beneficiation to produce a concentrate and/or raffinate solution. Metal selection and further concentration is initiated in primary extraction, which may involve calcining, smelting, high pressure leaching, and other processes. The final product is obtained through further refining, which may involve processes such as re-leaching, selective solvent / solution extraction, selective precipitation, electrowinning, and other treatments. Transport is reported separately and consists of only the internal movements of materials / intermediates, and not the movement of final product. Due to its intrinsic value, cobalt has a high recycling rate. However, much of this recycling takes place downstream through the recycling of alloy scrap into new alloy, or goes into the cobalt chemical sector as an intermediate requiring additional refinement. Secondary production, ie production from the recycling of cobalt-containing wastes, is considered in this study in so far as it occurs as part of the participating companies’ production. This was shown to be of very limited significance (less than 1% of cobalt inputs). The secondary materials used for producing cobalt are modelled as entering the system free of environmental burden. technologyComment of platinum group metal mine operation, ore with high palladium content (RU): imageUrlTagReplace6250302f-4c86-4605-a56f-03197a7811f2 technologyComment of platinum group metal, extraction and refinery operations (ZA): The ores from the different ore bodies are processed in concentrators where a PGM concentrate is produced with a tailing by product. The PGM base metal concentrate product from the different concentrators processing the different ores are blended during the smelting phase to balance the sulphur content in the final matte product. Smelter operators also carry out toll smelting from third part concentrators. The smelter product is send to the Base metal refinery where the PGMs are separated from the Base Metals. Precious metal refinery is carried out on PGM concentrate from the Base metal refinery to split the PGMs into individual metal products. Water analyses measurements for Anglo Platinum obtained from literature (Slatter et.al, 2009). Mudd, G., 2010. Platinum group metals: a unique case study in the sustainability of mineral resources, in: The 4th International Platinum Conference, Platinum in Transition “Boom or Bust.” Water share between MC and EC from Mudd (2010). Mudd, G., 2010. Platinum group metals: a unique case study in the sustainability of mineral resources, in: The 4th International Platinum Conference, Platinum in Transition “Boom or Bust.” technologyComment of processing of nickel-rich materials (GLO): Based on typical current technology. technologyComment of smelting and refining of nickel concentrate, 16% Ni (GLO): Extrapolated from a typical technology for smelting and refining of nickel ore. MINING: 95% of sulphidic nickel ores are mined underground in depths between 200m and 1800m, the ore is transferred to the beneficiation. Widening of the tunnels is mainly done by blasting. The overburden – material, which does not contain PGM-bearing ore – is deposed off-site and is partially refilled into the tunnels. Emissions: The major emissions are due to mineral born pollutants in the effluents. The underground mining operations generate roughly 80 % of the dust emissions from open pit operations, since the major dust sources do not take place underground. Rain percolate through overburden and accounts to metal emissions to groundwater. Waste: Overburden is deposed close to the mine. Acid rock drainage occurs over a long period of time. BENEFICIATION: After mining, the ore is first ground. In a next step it is subjected to gravity concentration to separate the metallic particles from the PGM-bearing minerals. After this first concentration step, flotation is carried out to remove the gangue from the sulphidic minerals. For neutralisation lime is added. In the flotation several organic chemicals are used as collector, frother, activator, depressor and flocculant. Sometimes cyanide is used as depressant for pyrite. Tailings usually are led to tailing heaps or ponds. As a result, nickel concentrates containing 7 - 25% Ni are produced. Emissions: Ore handling and processing produce large amounts of dust, containing PM10 and several metals from the ore itself. Flotation produce effluents containing several organic agents used. Some of these chemicals evaporate and account for VOC emissions to air. Namely xanthates decompose hydrolytically to release carbon disulphide. Tailings effluent contains additional sulphuric acid from acid rock drainage. Waste: Tailings are deposed as piles and in ponds. Acid rock drainage occurs over a long period of time. METALLURGY AND REFINING: There are many different process possibilities to win the metal. The chosen process depends on the composition of the ore, the local costs of energy carrier and the local legislation. Basically two different types can be distinguished: the hydrometallurgical and the pyrometallurgical process, which paired up with the refining processes, make up five major production routes (See Tab.1). All this routes are covered, aggregated according to their market share in 1994. imageUrlTagReplace00ebef53-ae97-400f-a602-7405e896cb76 Pyrometallurgy. The pyrometallurgical treatment of nickel concentrates includes three types of unit operation: roasting, smelting, and converting. In the roasting step sulphur is driven off as sulphur dioxide and part of the iron is oxidised. In smelting, the roaster product is melted with a siliceous flux which combines with the oxidised iron to produce two immiscible phases, a liquid silicate slag which can be discarded, and a solution of molten sulphides which contains the metal values. In the converting operation on the sulphide melt, more sulphur is driven off as sulphur dioxide, and the remaining iron is oxidised and fluxed for removal as silicate slag, leaving a high-grade nickel – copper sulphide matte. In several modern operations the roasting step has been eliminated, and the nickel sulphide concentrate is treated directly in the smelter. Hydrometallurgy: Several hydrometallurgical processes are in commercial operation for the treatment of nickel – copper mattes to produce separate nickel and copper products. In addition, the hydrometal-lurgical process developed by Sherritt Gordon in the early 1950s for the direct treatment of nickel sulphide concentrates, as an alternative to smelting, is still commercially viable and competitive, despite very significant improvements in the economics and energy efficiency of nickel smelting technology. In a typical hydrometallurgical process, the concentrate or matte is first leached in a sulphate or chloride solution to dissolve nickel, cobalt, and some of the copper, while the sulphide is oxidised to insoluble elemental sulphur or soluble sulphate. Frequently, leaching is carried out in a two-stage countercurrent system so that the matte can be used to partially purify the solution, for example, by precipitating copper by cementation. In this way a nickel – copper matte can be treated in a two-stage leach process to produce a copper-free nickel sulphate or nickel chloride solution, and a leach residue enriched in copper. Refining: In many applications, high-purity nickel is essential and Class I nickel products, which include electrolytic cathode, carbonyl powder, and hydrogen-reduced powder, are made by a variety of refining processes. The carbonyl refining process uses the property of nickel to form volatile nickel-carbonyl compounds from which elemental nickel subsides to form granules. Electrolytic nickel refineries treat cast raw nickel anodes in a electrolyte. Under current the anode dissolves and pure nickel deposits on the cathode. This electrorefining process is obsolete because of high energy demand and the necessity of building the crude nickel anode by reduction with coke. It is still practised in Russia. Most refineries recover electrolytic nickel by direct electrowinning from purified solutions produced by the leaching of nickel or nickel – copper mattes. Some companies recover refined nickel powder from purified ammoniacal solution by reduction with hydrogen. Emissions: In all of the metallurgical steps, sulphur dioxide is emitted to air. Recovery of sulphur dioxide is only economic for high concentrated off-gas. Given that In the beneficiation step, considerable amounts of lime are added to the ore for pH-stabilisation, lime forms later flux in the metallurgical step, and decomposes into CO2 to form calcite. Dust carry over from the roasting, smelting and converting processes. Particulate emissions to the air consist of metals and thus are often returned to the leaching process after treatment. Chlorine is used in some leaching stages and is produced during the subsequent electrolysis of chloride solution. The chlorine evolved is collected and re-used in the leach stage. The presence of chlorine in wastewater can lead to the formation of organic chlorine compounds (AOX) if solvents etc. are also present in a mixed wastewater. VOCs can be emitted from the solvent extraction stages. A variety of solvents are used an they contain various complexing agents to form complexes with the desired metal that are soluble in the organic layer. Metals and their compounds and substances in suspension are the main pollutants emitted to water. The metals concerned are Cu, Ni, Co, As and Cr. Other significant substances are chlorides and sulphates. Wastewater from wet gas cleaning (if used) of the different metallurgical stages are the most important sources. The leaching stages are usually operated on a closed circuit and drainage systems, and are therefore regarded as minor sources. In the refining step, the combustion of sulphur leads to emissions of SO2. Nitrogen oxides are produced in significant amounts during acid digestion using nitric acid. Chlorine and HCl can be formed during a number of digestion, electrolytic and purification processes. Chlorine is used extensively in the Miller process and in the dissolution stages using hydrochloric acid and chlorine mixtrues respectively. Dust and metals are generally emitted from incinerators and furnaces. VOC can be emitted from solvent extraction processes, while organic compounds, namely dioxins, can be emitted from smelting stages resulting from the poor combustion of oil and plastic in the feed material. All these emissions are subject to abatement technologies and controlling. Large quantities of effluents contain amounts of metals and organic substances. Waste: Regarding the metallurgical step, several co-products, residues and wastes, which are listed in the European Waste Catalogue, are generated. Some of the process specific residues can be reused or recovered in preliminary process steps (e. g. dross, filter dust) or construction (e. g. cleaned slag). Residues also arise from the treatment of liquid effluents, the main residue being gypsum waste and metal hydroxides from the wastewater neutralisation plant. These residuals have to be disposed, usually in lined ponds. In the refining step, quantities of solid residuals are also generated, which are mostly recycled within the process or sent to other specialists to recover any precious metals. Final residues generally comprise hydroxide filter cakes (ironhydroxide, 60% water, cat I industrial waste). References: Kerfoot D. G. E. (1997) Nickel. In: Ullmann's encyclopedia of industrial chemis-try (ed. Anonymous). 5th edition on CD-ROM Edition. Wiley & Sons, London. technologyComment of smelting and refining of nickel concentrate, 7% Ni (CN): The nickel concentrate (6.78% beneficiated - product of the mining and beneficiation processes) undergoes drying, melting in flash furnace and converting to produce high nickel matte. The nickel matte undergoes grinding-floating separation and is refined through anode plate casting and electrolysis in order to produce electrolytic nickel 99.98% pure. Deng, S. Y., & Gong, X. Z. (2018). Life Cycle Assessment of Nickel Production in China. Materials Science Forum, 913, 1004-1010. doi:10.4028/www.scientific.net/MSF.913.1004 technologyComment of treatment of metal part of electronics scrap, in copper, anode, by electrolytic refining (SE, RoW): Production of cathode copper by electrolytic refining.
technologyComment of titanium production (GLO): Primary titanium metal is produced mainly by Kroll process. In this batch process, titanium tetrachloride (TiCl4) is reduced with magnesium under inert atmosphere creating a sponge like titanium metal solid which is refined by vaccum arc remelting. The Kroll process is characterized by multiple steps for which many are energy and labor intensive. Main steps include batch reduction, processing, vaccum distillation and remelting. Main batch reduction takes place in a steel reactor filled with argon where the magnesium is melt at temperature between 850°C-950°C. The titanium chloride (TiCl4) is fed, or blown in as vapor, into the reactor. The reduction is a highly exothermic reaction, thus little energy input is required for it to take place. Reaction is as follow: TiCl4(l or g) + 2 Mg(l) = Ti(s) + 2 MgCl2(l). During the processing the reaction by-product, molten magnesium chloride (MgCl2), is remove from the reator periodically during the reaction. The magnesium and clhoride from this by-product are recovered using electrolysis and re-used. Main product from the process is a sponge like titanium (Ti(0)). Vaccum distillation is then use to purified the crude sponge removing residual metal chlorides and magnesium. This process takes place at temperature between 900°C and 1000°C. The residuals are recovered by condensation. The purified titanium sponge is refined using vacuum arc remelting.
technologyComment of platinum group metal mine operation, ore with high palladium content (RU): imageUrlTagReplace6250302f-4c86-4605-a56f-03197a7811f2 technologyComment of platinum group metal, extraction and refinery operations (ZA): The ores from the different ore bodies are processed in concentrators where a PGM concentrate is produced with a tailing by product. The PGM base metal concentrate product from the different concentrators processing the different ores are blended during the smelting phase to balance the sulphur content in the final matte product. Smelter operators also carry out toll smelting from third part concentrators. The smelter product is send to the Base metal refinery where the PGMs are separated from the Base Metals. Precious metal refinery is carried out on PGM concentrate from the Base metal refinery to split the PGMs into individual metal products. Water analyses measurements for Anglo Platinum obtained from literature (Slatter et.al, 2009). Mudd, G., 2010. Platinum group metals: a unique case study in the sustainability of mineral resources, in: The 4th International Platinum Conference, Platinum in Transition “Boom or Bust.” Water share between MC and EC from Mudd (2010). Mudd, G., 2010. Platinum group metals: a unique case study in the sustainability of mineral resources, in: The 4th International Platinum Conference, Platinum in Transition “Boom or Bust.” technologyComment of treatment of automobile catalyst (RoW): After collection and transportation to the intermediary dealer, the scrap is ground in a mill. The resulting material is fed to specialised refineries. The metallurgical step consists of an arc-furnace. Same refining process as in primary production assumed (selective precipitation) technologyComment of treatment of automobile catalyst (RER): The production process consists of three steps: Collection, Beneficiation and Refining. COLLECTION: Spoiled automotive catalysts are bought by specialised enterprises from different origins. Part of it originates from scrap dealer recycling end-of-life cars. Further more during the cars operating phase, defective catalysts are exchanged in garages. The third sources is the production waste, i. e. defective catalysts which do not reach market. In most cases, there are fix agreements between the different supplier and the intermediary trade. Although the trade with PGM containing scrap is risky. Motor car manufacturer built up their own internal recycling systems with their contractor garages and gained access to exchanged catalysts. Emissions: Emissions during collection are gases from transportation and dust from dismantling. Also in this step the combustion leads to emissions of SO2. No serious water emissions are reported. BENEFICIATION: The catalysts are dismantled and then sold to refining companies. Refineries too have long-term contracts with the intermediary trade. Emissions: Emissions during beneficiation are gases from transportation and dust from dismantling. Also in this step the combustion leads to emissions of SO2. No serious water emissions are reported. REFINING: The scrap first is shredded and then pyrometallurgicaly processed: The scrap is smelted in an electric arc furnace, and the ceramic wafer is slagged. The PGMs are concentrated in the collector metal, usually copper. Low-content PGM scrap is often smelted together with other non-ferrous metal matte. This is cheap, but effects a high loss in PGM. The collector matte from the furnace then is treated hydrometallurgically by re-precipitation. In this step usually production scrap from other industries (glass, chemical laboratories) is joined. The overall PGM-yield is 98 % for platinum and 85 % for rhodium. Emissions: Dust and metals are generally emitted from incinerators and furnaces. VOC can be emitted from solvent extraction processes, while organic compounds, namely dioxins, can be emitted from smelting stages resulting from the poor combustion of oil and plastic in the feed material. All these emissions are subject to abatement technologies and controlling. Effluents from refining contain considerable amounts of metals and organic substances. Waste: Solid residues from pyrometallurgical step are usually re-used in copper facilities, final residues generally comprise hydroxide filter cakes. References: Hagelücken C. (2001b) Die Märkte der Katalysatormetalle Platin, Palladium und Rhodium. In: Autoabgaskatalysatoren, Vol. 612. pp. 95-115. Expert Verlag, Renningen. Online-Version under: http://www.dmc-2.de/pmc_eng/Veroeffentlichungen_2/Die%20M%C3%A4rkte%20der%20Katalysatormetalle%20Pt%20Pd%20Rh.pdf.
technologyComment of platinum group metal mine operation, ore with high palladium content (RU): imageUrlTagReplace6250302f-4c86-4605-a56f-03197a7811f2 technologyComment of platinum group metal, extraction and refinery operations (ZA): The ores from the different ore bodies are processed in concentrators where a PGM concentrate is produced with a tailing by product. The PGM base metal concentrate product from the different concentrators processing the different ores are blended during the smelting phase to balance the sulphur content in the final matte product. Smelter operators also carry out toll smelting from third part concentrators. The smelter product is send to the Base metal refinery where the PGMs are separated from the Base Metals. Precious metal refinery is carried out on PGM concentrate from the Base metal refinery to split the PGMs into individual metal products. Water analyses measurements for Anglo Platinum obtained from literature (Slatter et.al, 2009). Mudd, G., 2010. Platinum group metals: a unique case study in the sustainability of mineral resources, in: The 4th International Platinum Conference, Platinum in Transition “Boom or Bust.” Water share between MC and EC from Mudd (2010). Mudd, G., 2010. Platinum group metals: a unique case study in the sustainability of mineral resources, in: The 4th International Platinum Conference, Platinum in Transition “Boom or Bust.” technologyComment of treatment of automobile catalyst (RoW): After collection and transportation to the intermediary dealer, the scrap is ground in a mill. The resulting material is fed to specialised refineries. The metallurgical step consists of an arc-furnace. Same refining process as in primary production assumed (selective precipitation) technologyComment of treatment of automobile catalyst (RER): The production process consists of three steps: Collection, Beneficiation and Refining. COLLECTION: Spoiled automotive catalysts are bought by specialised enterprises from different origins. Part of it originates from scrap dealer recycling end-of-life cars. Further more during the cars operating phase, defective catalysts are exchanged in garages. The third sources is the production waste, i. e. defective catalysts which do not reach market. In most cases, there are fix agreements between the different supplier and the intermediary trade. Although the trade with PGM containing scrap is risky. Motor car manufacturer built up their own internal recycling systems with their contractor garages and gained access to exchanged catalysts. Emissions: Emissions during collection are gases from transportation and dust from dismantling. Also in this step the combustion leads to emissions of SO2. No serious water emissions are reported. BENEFICIATION: The catalysts are dismantled and then sold to refining companies. Refineries too have long-term contracts with the intermediary trade. Emissions: Emissions during beneficiation are gases from transportation and dust from dismantling. Also in this step the combustion leads to emissions of SO2. No serious water emissions are reported. REFINING: The scrap first is shredded and then pyrometallurgicaly processed: The scrap is smelted in an electric arc furnace, and the ceramic wafer is slagged. The PGMs are concentrated in the collector metal, usually copper. Low-content PGM scrap is often smelted together with other non-ferrous metal matte. This is cheap, but effects a high loss in PGM. The collector matte from the furnace then is treated hydrometallurgically by re-precipitation. In this step usually production scrap from other industries (glass, chemical laboratories) is joined. The overall PGM-yield is 98 % for platinum and 85 % for rhodium. Emissions: Dust and metals are generally emitted from incinerators and furnaces. VOC can be emitted from solvent extraction processes, while organic compounds, namely dioxins, can be emitted from smelting stages resulting from the poor combustion of oil and plastic in the feed material. All these emissions are subject to abatement technologies and controlling. Effluents from refining contain considerable amounts of metals and organic substances. Waste: Solid residues from pyrometallurgical step are usually re-used in copper facilities, final residues generally comprise hydroxide filter cakes. References: Hagelücken C. (2001b) Die Märkte der Katalysatormetalle Platin, Palladium und Rhodium. In: Autoabgaskatalysatoren, Vol. 612. pp. 95-115. Expert Verlag, Renningen. Online-Version under: http://www.dmc-2.de/pmc_eng/Veroeffentlichungen_2/Die%20M%C3%A4rkte%20der%20Katalysatormetalle%20Pt%20Pd%20Rh.pdf. technologyComment of treatment of precious metal from electronics scrap, in anode slime, precious metal extraction (SE, RoW): Anode slime treatment by pressure leaching and top blown rotary converter. Production of Silver by Möbius Electrolysis, Gold by Wohlwill electrolysis, Palladium to further processing
Das Projekt "High density power electronics for FC- and ICE-Hybrid Electric Vehicle Powertrains (HOPE)" wird vom Umweltbundesamt gefördert und von Siemens AG durchgeführt. Objective: The project HOPE is addressing power electronics. It is based on previous EU research projects like the recently finished FW5 HIMRATE (high-temperature power modules), FW5 PROCURE (high-temperature passive components), and MEDEA+ HOTCAR (high-temperature control electronics) and other EU and national research projects. The general objectives of HOPE are: Cost reduction; meet reliability requirements; reduction of volume and weight. This is a necessity to bring the FC- and ICE-hybrid vehicles to success. WP1 defines specifications common to OEM for FC- and ICE-hybrid vehicle drive systems; Identification of common key parameters (power, voltage, size) that allows consequent standardisation; developing a scalability matrix for power electronic building blocks PEBBs. The power ranges will be much higher than those of e.g. HIMRATE and will go beyond 100 kW electric power. WP2 works out one reference mission profile, which will be taken as the basis for the very extensive reliability tests planned. WP3 is investigating key technologies for PEBBs in every respect: materials, components (active Si- and SiC switches, passive devices, sensors), new solders and alternative joinings, cooling, and EMI shielding. In WP4 three PEBBs will be developed: HDPM (high density power module) which is based on double side liquid cooling of the power semiconductor devices; IML (power mechatronics module), which is based on a lead-frame technology; and SiC-PEBB inverter (silicon carbide semiconductor JFET devices instead of Si devices). WP5 develops a control unit for high-temperature control electronics for the SiC-PEBBs. Finally WP6 works on integrating the new technologies invented in HOPE into powertrain systems and carries out a benchmark tests. All the results achieved in HOPE will be discussed intensively with the proposed Integrated Project HYSIS where the integration work will take place. It is clear from the start that many innovations are necessary to meet the overall goal.
Das Projekt "WENDE: Entwicklung eines für das Fügen von Al-Cu-Verbunden geeigneten Hochstrom-Umrichtersystems" wird vom Umweltbundesamt gefördert und von Alfred Kruse GmbH Metallveredelungen durchgeführt. Die Reichweite von Elektroautos wird durch das Fahrzeuggewicht und die Kapazität der verwendeten Batteriesysteme limitiert. Die Einsparung von Gewicht, gepaart mit der Entwicklung leistungsfähigerer Energieträger könnte die Reichweite konventioneller Elektroautos erhöhen und gleichzeitig die gesellschaftliche Akzeptanz dieser Antriebstechnologie steigern. Für die bei der Elektromobilität erforderlichen Energieträger, bzw. Energiekomponenten müssen Cu-Al-Verbindungen gefügt werden. In diesem Kontext sind als Beispiele Lithium-Ionen-Akkus, die Hochstrom DC-Verkabelung und elektrische Bauteilkomponenten der Steuer- und Systemelektronik zu nennen. Das Fügen dieser Werkstoffe ist wegen den sich an der Fügegrenzfläche ausbildenden spröden intermetallischen schwierig und nur mit hohem Aufwand zu realisieren. Das Ziel dieses Forschungsvorhabens ist die Entwicklung geeigneter Zusatzwerkstoffe und einer angepassten Prozessführung für das industriell-wirtschaftliche Fügen von Cu mit Al. Für die Zielerreichung haben sich die Unternehmen TIGRIS, KRUSE, NI-MAK und die Forschungseinrichtung Lehrstuhl Werkstofftechnik der Ruhr-Universität Bochum zusammengefunden. Der Fokus der Fa. Kruse und des LWT liegt in der Materialentwicklung, der Herstellung geeigneter Fügehilfsstoffe und der metallkundlichen Untersuchung der durch NIMAK gefügten Materialverbunde. NIMAK hat das Ziel die Schweißtechnik dahingehend zu optimieren, dass einerseits geeignete Prozessfenster für das Fügen evaluiert und andererseits Konzepte zur Platzierung der Zusatzwerkstoffe erarbeitet werden. Unterstützend dazu wird die Fa. TIGRIS mit der Implementierung geeigneter Leistungselektronik den Wiederstandsschweißprozess optimieren. Zuletzt gilt es durch die Fa. NIMAK einen geeigneten Demonstrator herzustellen und seine Funktionsfähigkeit unter Realbedingungen zu testen. Dabei sollen Kondensatoren für die Stromversorgung von Elektromotoren hergestellt und in den Einsatz gebracht werden.
The heavy metal copper has been widely used in industrial processes as well as a pesticide product in agriculture or as biocide. Anthropogenic activities by which copper can enter the environment are rather diverse including mining, metal finishing factories, discharging in industry, or sewage treatment plants. In agriculture, copper compounds are used mainly as fungicides or herbicides (e.g. reviewed by Flemming and Trevors 1989). Furthermore, it was formerly used in reservoirs, streams and ponds for controlling algae blooms and is now commonly used as a biocide in antifouling paintings for ships to protect hulls from corrosion and for fuel efficiency (Piola et al. 2009; Watermann et al. 2017). When copper is released into freshwater systems, for example via agricultural runoff, it exists in surface waters in the form of free ions (Cu2+), complexed with ligands or bound to particles, occurring at median water concentrations often ranging between 4 to 10 Ìg Cu2+/L (ATSDR 2004). As a persistent element, copper is able to accumulate in biofilms (Morin et al. 2008) and sediments of rivers, lakes and estuaries, from where it can also be remobilised (Watermann et al. 2017). Absorption of copper ions into biofilms increases with increasing ion concentration (Bhaskar and Bhosle 2006), leading to highly contaminated biofilms in polluted environments. © 2020 Springer Nature Switzerland AG
Das Projekt "Verwertung von grossvolumigen Quecksilberhaltigen Rektifikatoren ohne jede Umweltbelastung" wird vom Umweltbundesamt gefördert und von GMR - Gesellschaft für Metallrecycling mbH durchgeführt. There is an increasing interest within the region of EU in exploitation of voluminous mercury-containing rectifiers without any environmental pollution. The problem of exploitation of such rectifiers is not solved until now. The recommended project allows the complete recycling of the rectifiers without any environmental damages on easy terms. The exploitation of voluminous mercury-containing rectifiers (diameter greater than 1 m, height greater than 1,5 m) without any environmental damages is only possible by the use of thermal processes under reduced pressure. Using the recommended technology for small rectifiers for the voluminous ones would lead to expensive distillers with the need of high energy - but without any guarantee of mercury free material after treatment because of the bad heat transfer and the problems with the sealings. Therefore it is recommended in the project to use the vacuum vessels of the rectifiers as distillers themselves in combination with special heating elements. The condensation of the evaporated mercury takes place in special low-temperature condensors, the waste air is purified by active coal. The recovered mercury is purified to high quality and sold. The refined mercury free metals were used in the metallurgy. The permission procedure and the erection of the equipment takes place in 1994/95. The start of the treatment will be at the end of 1995 or at the beginning of 1996. The calculated amount of nearly 500 rectifiers should be treated within 5 years. It is recommended to support the project by suitable steps of the legislator to be sure to avoid any risk for the environment.
| Origin | Count |
|---|---|
| Bund | 64 |
| Land | 2 |
| Type | Count |
|---|---|
| Förderprogramm | 18 |
| Messwerte | 1 |
| Text | 47 |
| unbekannt | 1 |
| License | Count |
|---|---|
| closed | 3 |
| open | 56 |
| unknown | 7 |
| Language | Count |
|---|---|
| Deutsch | 65 |
| Englisch | 6 |
| Resource type | Count |
|---|---|
| Archiv | 6 |
| Datei | 6 |
| Dokument | 6 |
| Keine | 14 |
| Webseite | 46 |
| Topic | Count |
|---|---|
| Boden | 18 |
| Lebewesen & Lebensräume | 22 |
| Luft | 20 |
| Mensch & Umwelt | 66 |
| Wasser | 46 |
| Weitere | 66 |