Raw data acquired by two SBE21 thermosalinograph and two auxiliary SBE38 temperature sensor (Sea-Bird Scientific, USA) installed in an underway seawater flow-through system on board RV Polarstern were processed to yield a calibrated and validated data set of temperature and salinity along the cruise track. Data were downloaded from DAVIS SHIP data base (https://dship.awi.de) at a resolution of 1 sec, and converted to temperature and conductivity using the pre-deployment factory calibration coefficients. The converted data were averaged to 1 min values, outliers were removed, and sensor drift was corrected using coefficients obtained from a post-season calibration performed at Sea-Bird at the end of the measurement season. Salinity was calculated from internal temperature, conductivity and pressure according to the PSS-78 Practical Salinity Scale. Processed data are provided as 1 min means of seawater temperature, conductivity and salinity, aligned with position data taken from the master track. Quality flags are appended according to the SeaDataNet Data Quality Control Procedures (version from May 2010). More details are described in the attached processing report.
Raw physical oceanography data was acquired by a ship-based Seabird SBE911plus CTD-Rosette system onboard RV POLARSTERN during research cruise PS132. The CTD was equipped with duplicate sensors for temperature (SBE3plus) and conductivity (SBE4). Additional sensors such as an oxygen sensor (SBE43), a WET Labs C-Star transmissometer, a WET Labs ECO-AFL fluorometer (FLRTD) and an altimeter (Teledyne Benthos PSA-916) were mounted to the CTD. During this cruise issues with the ECO-AFL fluorometer and the C-Star transmissometer were faced. Cables and sensors were changed several times but the issue remained. Chlorophyll as well as beam transmission values should be treated with extreme care. The data was recorded using pre-cruise calibration coefficients (possibly wrong coefficients for the ECO-AFL fluorometer and the C-Star transmissometer). No correction, post-cruise calibration or quality control was applied. Text files containing bottle-Data were created using SBEDataProcessing steps "Data Conversion" and "Bottle Summary" without applying any correction.
Raw data acquired by two SBE21 thermosalinograph and two auxiliary SBE38 temperature sensor (Sea-Bird Scientific, USA) installed in an underway seawater flow-through system on board RV Polarstern were processed to yield a calibrated and validated data set of temperature and salinity along the cruise track. Data were downloaded from DAVIS SHIP data base (https://dship.awi.de) at a resolution of 1 sec, and converted to temperature and conductivity using the pre-deployment factory calibration coefficients. The converted data were averaged to 1 min values, outliers were removed, and sensor drift was corrected using coefficients obtained from a post-season calibration performed at Sea-Bird at the end of the measurement season. Salinity was calculated from internal temperature, conductivity and pressure according to the PSS-78 Practical Salinity Scale. Processed data are provided as 1 min means of seawater temperature, conductivity and salinity, aligned with position data taken from the master track. Quality flags are appended according to the SeaDataNet Data Quality Control Procedures (version from May 2010). More details are described in the attached processing report.