API src

Found 887 results.

Similar terms

s/tss/TCS/gi

Grundwassermessstelle DEGM_SH_1290: SÜDERLÜGUMFELD

Stammdaten und Analysedaten zu den Grundwassermessstellen im EUA-Messnetz: Messtelle DEGM_SH_1290 (SÜDERLÜGUMFELD)

Oyster mortality and physicochemical parameters in the exposure mesocosms of a chronic Ostrea edulis alkalinity-enhancement exposure experiment

This dataset contains oyster mortality records and the main physicochemical parameters monitored in the exposure mesocosms, the tanks holding 60 oysters per treatment (unamended control, dissolved alkalinity addition with NaOH and CaCl2 at +250 or +500 µmol/kg, and olivine-based coastal enhanced silicate weathering at +250 or +500 µmol/kg). Mortality is reported as the number of oysters alive, the interval and cumulative number of oysters found dead, and the relative cumulative mortality (a proportion of the initial 60 individuals per tank). Physicochemical parameters include water temperature, dissolved oxygen, conductivity, salinity, total chlorophyll a, suspended particulate matter and ammonia concentration. Measurements span 17 April to 10 July 2024, covering the alkalinization period and the subsequent 63-day chronic exposure. Water temperature, oxygen and conductivity/salinity were recorded with a multi-probe (Xylem Analytics Germany). Total chlorophyll a was measured by fluorescence on unfiltered seawater with a bbe fluorimeter. Suspended particulate matter was determined gravimetrically from filtered seawater. Ammonia was quantified fluorometrically with a microplate reader assay kit.

Continuous thermosalinograph oceanography along RV HEINCKE cruise track HE585

Raw data acquired by an SBE21 thermosalinograph and an auxiliary SBE38 temperature sensor (Sea-Bird Scientific, USA) installed in an underway seawater flow-through system on board RV Heincke were processed to yield a calibrated and validated data set of seawater temperature and salinity along the cruise track. The seawater inlet is located at a depth of 2 m. The raw hexadecimal data were downloaded from the DAVIS SHIP data base (https://dship.awi.de) at a resolution of 1 s, and converted to temperature and conductivity using the pre-deployment factory calibration coefficients. The converted data were averaged to 1 min values, outliers were removed, and sensor drift was corrected using coefficients obtained from a post-season calibration performed at Sea-Bird at the end of the measurement season. Salinity was calculated from internal temperature, conductivity and pressure according to the PSS-78 Practical Salinity Scale. Processed data are provided as 1 min means of seawater temperature, conductivity and salinity, aligned with position data taken from the master track. Quality flags are appended according to the SeaDataNet Data Quality Control Procedures (version from May 2010). More details are described in the attached processing report.

Continuous thermosalinograph oceanography along RV HEINCKE cruise track HE589

Raw data acquired by a thermosalinograph (SBE21, SeaBird GmbH) on board RV HEINCKE were processed to receive a calibrated and validated data set of seawater temperature and salinity. Data were downloaded from DAVIS SHIP data base (https://dship.awi.de) with a resolution of 1 sec. The SBE21 was equipped with an additional external temperature sensor (SBE38, Sea-Bird GmbH). Raw data are converted to temperature and conductivity values using the calibration coefficients from the calibration before deployment. However, data can only be finally processed after replacement and renewed calibration because correction values for the sensor drift can only be obtained by the post cruise calibration. The thermosalinograph on board RV HEINCKE is exchanged about once a year and calibration procedures are conducted after every exchange. Salinity was calculated according to the instructions from the Practical Salinity Scale PSS-78 using the obtained internal temperature and conductivity data. Processed data are provided as 1min means of salinity and seawater temperature aligned with position data taken from master track of the respective cruise. Quality flags are appended according to the SeaDataNet Data Quality Control Procedures (version from May 2010).

Continuous thermosalinograph oceanography along RV POLARSTERN cruise track PS126

This dataset contains processed ocean temperature and salinity data at a depth of 11m along the cruise track. Raw data acquired by two SBE21 thermosalinographs and two auxiliary SBE38 temperature sensors (Sea-Bird Scientific, USA) installed in an underway seawater flow-through system on board RV Polarstern were processed to yield a calibrated and validated data set of temperature and salinity along the cruise track. Data were downloaded from DAVIS SHIP data base (https://dship.awi.de) at a resolution of 1 sec, and converted to temperature and conductivity using the pre-deployment factory calibration coefficients. The converted data were averaged to 1 min values, outliers were removed, and sensor drift was corrected using coefficients obtained from a post-season calibration performed at Sea-Bird at the end of the measurement season. Salinity was calculated from internal temperature, conductivity and pressure according to the PSS-78 Practical Salinity Scale. Processed data are provided as 1 min means of seawater temperature, conductivity and salinity, aligned with position data taken from the master track. Quality flags are appended according to the SeaDataNet Data Quality Control Procedures (version from May 2010). More details are described in the attached processing report.

Continuous thermosalinograph oceanography along RV HEINCKE cruise track HE635

Raw data acquired by a thermosalinograph (SBE21, SeaBird GmbH) on board RV HEINCKE were processed to receive a calibrated and validated data set of seawater temperature and salinity. Data were downloaded from DAVIS SHIP data base (https://dship.awi.de) with a resolution of 1 sec. The SBE21 was equipped with an additional external temperature sensor (SBE38, Sea-Bird GmbH). Raw data are converted to temperature and conductivity values using the calibration coefficients from the calibration before deployment. However, data can only be finally processed after replacement and renewed calibration because correction values for the sensor drift can only be obtained by the post cruise calibration. The thermosalinograph on board RV HEINCKE is exchanged about once a year and calibration procedures are conducted after every exchange. Salinity was calculated according to the instructions from the Practical Salinity Scale PSS-78 using the obtained internal temperature and conductivity data. Processed data are provided as 1min means of salinity and seawater temperature aligned with position data taken from master track of the respective cruise. Quality flags are appended according to the SeaDataNet Data Quality Control Procedures (version from May 2010).

Continuous thermosalinograph oceanography along RV HEINCKE cruise track HE650

Raw data acquired by a thermosalinograph (SBE21, SeaBird GmbH) on board RV HEINCKE were processed to receive a calibrated and validated data set of seawater temperature and salinity. Data were downloaded from DAVIS SHIP data base (https://dship.awi.de) with a resolution of 1 sec. The SBE21 was equipped with an additional external temperature sensor (SBE38, Sea-Bird GmbH). Raw data are converted to temperature and conductivity values using the calibration coefficients from the calibration before deployment. However, data can only be finally processed after replacement and renewed calibration because correction values for the sensor drift can only be obtained by the post cruise calibration. The thermosalinograph on board RV HEINCKE is exchanged about once a year and calibration procedures are conducted after every exchange. Salinity was calculated according to the instructions from the Practical Salinity Scale PSS-78 using the obtained internal temperature and conductivity data. Processed data are provided as 1min means of salinity and seawater temperature aligned with position data taken from master track of the respective cruise. Quality flags are appended according to the SeaDataNet Data Quality Control Procedures (version from May 2010).

Continuous thermosalinograph oceanography along RV HEINCKE cruise track HE636

Raw data acquired by a thermosalinograph (SBE21, SeaBird GmbH) on board RV HEINCKE were processed to receive a calibrated and validated data set of seawater temperature and salinity. Data were downloaded from DAVIS SHIP data base (https://dship.awi.de) with a resolution of 1 sec. The SBE21 was equipped with an additional external temperature sensor (SBE38, Sea-Bird GmbH). Raw data are converted to temperature and conductivity values using the calibration coefficients from the calibration before deployment. However, data can only be finally processed after replacement and renewed calibration because correction values for the sensor drift can only be obtained by the post cruise calibration. The thermosalinograph on board RV HEINCKE is exchanged about once a year and calibration procedures are conducted after every exchange. Salinity was calculated according to the instructions from the Practical Salinity Scale PSS-78 using the obtained internal temperature and conductivity data. Processed data are provided as 1min means of salinity and seawater temperature aligned with position data taken from master track of the respective cruise. Quality flags are appended according to the SeaDataNet Data Quality Control Procedures (version from May 2010).

Continuous thermosalinograph oceanography along RV HEINCKE cruise track HE633

Raw data acquired by a thermosalinograph (SBE21, SeaBird GmbH) on board RV HEINCKE were processed to receive a calibrated and validated data set of seawater temperature and salinity. Data were downloaded from DAVIS SHIP data base (https://dship.awi.de) with a resolution of 1 sec. The SBE21 was equipped with an additional external temperature sensor (SBE38, Sea-Bird GmbH). Raw data are converted to temperature and conductivity values using the calibration coefficients from the calibration before deployment. However, data can only be finally processed after replacement and renewed calibration because correction values for the sensor drift can only be obtained by the post cruise calibration. The thermosalinograph on board RV HEINCKE is exchanged about once a year and calibration procedures are conducted after every exchange. Salinity was calculated according to the instructions from the Practical Salinity Scale PSS-78 using the obtained internal temperature and conductivity data. Processed data are provided as 1min means of salinity and seawater temperature aligned with position data taken from master track of the respective cruise. Quality flags are appended according to the SeaDataNet Data Quality Control Procedures (version from May 2010).

Continuous thermosalinograph oceanography along RV HEINCKE cruise track HE642

Raw data acquired by a thermosalinograph (SBE21, SeaBird GmbH) on board RV HEINCKE were processed to receive a calibrated and validated data set of seawater temperature and salinity. Data were downloaded from DAVIS SHIP data base (https://dship.awi.de) with a resolution of 1 sec. The SBE21 was equipped with an additional external temperature sensor (SBE38, Sea-Bird GmbH). Raw data are converted to temperature and conductivity values using the calibration coefficients from the calibration before deployment. However, data can only be finally processed after replacement and renewed calibration because correction values for the sensor drift can only be obtained by the post cruise calibration. The thermosalinograph on board RV HEINCKE is exchanged about once a year and calibration procedures are conducted after every exchange. Salinity was calculated according to the instructions from the Practical Salinity Scale PSS-78 using the obtained internal temperature and conductivity data. Processed data are provided as 1min means of salinity and seawater temperature aligned with position data taken from master track of the respective cruise. Quality flags are appended according to the SeaDataNet Data Quality Control Procedures (version from May 2010).

1 2 3 4 5 … 87 88 89