API src

Found 647 results.

Similar terms

s/utd/ETD/gi

Other language confidence: 0.5323148806446795

Raw data of physical oceanography during RV HEINCKE cruise HE678

Raw physical oceanography data was acquired by a ship-based Seabird SBE911plus CTD-Rosette system onboard RV HEINCKE . The CTD was equipped with duplicate sensors for temperature (SBE3plus) and conductivity (SBE4) as well as one sensor for oxygen (SBE43). Additional sensors such as a WET Labs C-Star transmissometer, a WET Labs ECO-AFL fluorometer (FLRTD) and an altimeter (Teledyne Benthos PSA-916) were mounted to the CTD. The data was recorded using pre-cruise calibration coefficients. No correction, post-cruise calibration or quality control was applied. Processed profile data are available via the link below.

Steuerrandmessungen Elbe und Jade/Weser 2012

Die BAW (Bundesanstalt für Wasserbau) führt im Auftrag der WSV (Wasserstraßen- und Schifffahrtsverwaltung des Bundes) umfangreiche F&E-Untersuchungen (Forschung- und Entwicklung) zur Klimafolgenforschung sowie zur Auswirkung geplanter Ausbaumaßnahmen an Seeschifffahrtsstraßen durch. Hierfür werden hochauflösende dreidimensionale numerische Simulationsmodelle eingesetzt. Die Aussagefähigkeit und Qualität der Simulationsergebnisse ist hierbei entscheidend von der Güte der Steuerung an den Modellrändern abhängig. Die Modelltopographie (= "Rechengitter") und die verwendeten hydrologischen Bedingungen auf den Modellrändern sollten möglichst einen identischen Zeitraum repräsentieren. Da die Modelltopographien für die Modellgebiete des "Jade-Weser" und des "Elbe" - Modells der BAW im Jahr 2012 neu aufgebaut worden sind, ist im Sommer 2012 ein Messprogramm zur Erfassung der hydrologischen Randbedingungen durchgeführt worden. Zu diesem Zweck hat die BAW - Dienstort Hamburg ein Messnetz aus insgesamt 13 Beobachtungsstationen entlang der Steueränder der numerischen Modellsysteme eingerichtet. Mindestens über den Zeitraum eines "Nipp-Spring-Zyklus" (~ 14 Tage) wurden in verschiedenen Gerätekonfigurationen folgende Parameter gemessen: CTD-Messungen (Conductivity, Temperature, Depth): - Wasserspiegelauslenkung (Tidekurve) - Salinität - Temperatur - Trübung (teilweise) Für Zwecke der Modellvalidierung sind auf einem ca. 10 km parallel in das Modellgebiet verschobenen Rand ADCP-Messungen (Acoustic Doppler Current Profiler): - Strömungs- und - Seegangsmessungen (teilweise) durchgeführt worden. Soweit verfügbar sind Daten der von der WSV betriebenen Pegelstationen einbezogen worden. Für meterologische Informationen stehen Daten des DWD zur Verfügung (Quelle: Deutscher Wetterdienst).

Physical oceanography during RV MARIA S. MERIAN cruise MSM123

Physical oceanography data was acquired by a ship-based Seabird SBE911plus CTD-Rosette system onboard RV MARIA S. MERIAN during research cruise MSM123. The CTD system is comprised of a Seabird SBE911plus including dual respectively redundant sensor and pump packages. The SBE11plus Deck Unit remains on board in a laboratory and supplies on one hand power to the SBE9plus underwater unit, on the other hand data telemetry between the SBE9plus and a measurement PC. The SBE9plus underwater unit itself holds a pressure sensor and is interfacing with dual SEB3 temperature, SBE4 conductivity and SBE43 oxygen sensors, as well as two SBE5 pumps to provide a pumped water supply past each sensor. The system also carries an optical FLNTU sensor to measure a combination of back-scattering, turbidity, and chlorophyll-a. To quantify the photo-synthetically active radiation a PAR sensor is installed as well.

Raw data of physical oceanography during RV HEINCKE cruise HE491

Raw physical oceanography data was acquired by a ship-based Seabird SBE911plus CTD-Rosette system onboard RV HEINCKE. The CTD was equipped with duplicate sensors for temperature (SBE3plus) and conductivity (SBE4) as well as one sensor for oxygen (SBE43). Additional sensors such as a WET Labs C-Star transmissometer, a WET Labs ECO-AFL fluorometer (FLRTD) and an altimeter (Teledyne Benthos PSA-916) were mounted to the CTD. The data was recorded using pre-cruise calibration coefficients. No correction, post-cruise calibration or quality control was applied. Processed profile data are available via the link below.

Physical oceanography during RV HEINCKE cruise HE603

Conductivity-temperature-depth profiles were measured using a Seabird SBE 911plus CTD during RV Heincke cruise HE603. The CTD was equipped with duplicate sensors for temperature (SBE3plus), conductivity (SBE4) and oxygen (SBE43). Additional sensors such as a WET Labs C-Star transmissometer, a WET Labs ECO-AFL fluorometer and an altimeter (PSA-916 Teledyne (Benthos)) were mounted to the CTD. Temperature, conductivity and oxygen sensors are calibrated by the manufacturer once a year before being mounted in January. They are used throughout the year and no post-cruise or in-situ calibration is applied. All other sensors are calibrated irregularly. Data were connected to the station book of the specific cruise as available in the DSHIP database. Processing of the data including removal of obvious outliers followed the procedures described in CTD Processing Logbook of RV Heincke (hdl:10013/epic.47427). The processing report for this dataset is linked below.

Übersicht Kachelbezeichnungen Hamburg

Mit der Übersicht Kachelbezeichnungen werden Flächenquadrate für verschiedene Geobasisdaten des Landesbetriebes Geoinformation und Vermessung dargestellt. Der Datensatz und die herunterzuladenden Daten liegen soweit nicht anders angegeben in ETRS89 UTM vor. Als erläuternde Ergänzung zum vorliegenden Dienst gibt es Kachelübersichten zu den jeweiligen Datensätzen als Pdf (siehe Links). Folgende im Standarddatenpaket und teilweise im Transparenzportal herunterzuladende Daten werden mit ihren Dateinamen angezeigt: ALKIS: bildet 500m x 500m Kacheln ab, welche die Dateinamen der ALKIS-Daten beinhalten. DK5 bildet 1km x 1km Kacheln ab, welche die Dateinamen der Digitalen Karte 1: 5000 (DK5) beinhalten. DK5 Blattwerk in Gauß-Krüger bildet 2km x 2km Kacheln ab, welche die Blattnummern und -namen des analogen Kartenwerkes Karte von Hamburg 1: 5000 (DK5) beinhalten. Die Daten liegen in DHDN GK vor. DK5 Blattwerk in UTM bildet 2km x 2km Kacheln ab, welche die Blattnummern und -namen des analogen Kartenwerkes Karte von Hamburg 1: 5000 (DK5) beinhalten. DOP5 bildet 250m x 250m Kacheln ab, welche die Dateinamen der Digitalen Orthophotos mit 5cm Bodenauflösung (DOP5) beinhalten. DOP10 bildet 500m x 500m Kacheln ab, welche die Dateinamen der Digitalen Orthophotos mit 10cm Bodenauflösung (DOP10) beinhalten. DOP20 bildet 1km x 1km Kacheln ab, welche die Dateinamen der Digitalen Orthophotos mit 20cm Bodenauflösung (DOP20)beinhalten. DOP40 bildet 2km x 2km Kacheln ab, welche die Dateinamen der Digitalen Orthophotos mit 40cm Bodenauflösung (DOP40) beinhalten. DGM in Gauß-Krüger bildet 2km x 2km Kacheln ab, welche die Dateinamen der Digitalen Geländemodelle (DGM) beinhalten. Es liegen DGM1, DGM10 und DGM25 vor, wobei die Zahl jeweils den Abstand der Höhenpunkte im Punktraster angibt. Die Daten liegen in DHDN GK vor. DGM in UTM bildet 2km x 2km Kacheln ab, welche die Dateinamen der Digitalen Geländemodelle (DGM) beinhalten. Es liegen DGM1, DGM10 und DGM25 vor, wobei die Zahl jeweils den Abstand der Höhenpunkte im Punktraster angibt. DISK20 bildet 4km x 4km Kacheln ab, welche die Dateinamen der Digitalen Karte 1: 20 000 (DISK20) beinhalten. DISK60 bildet 12km x 12km Kacheln ab, welche die Dateinamen der Digitalen Karte 1: 60 000 (DISK60) beinhalten. DTK25 bildet die Kacheln ab, welche die Dateinamen der Digitalen Topographischen Karte 1: 25 000 (DTK25) beinhalten. Die Ausdehnung der Kacheln entspricht max. 10km x 10 km. Aufgrund der kleinen Fläche Hamburgs fallen sie unterschiedlich groß aus. DTK50 bildet die Kacheln ab, welche die Dateinamen der Digitalen Topographischen Karte 1: 50 000 (DTK50) beinhalten. Die Ausdehnung der Kacheln entspricht max. 20km x 20 km. Aufgrund der kleinen Fläche Hamburgs fallen sie unterschiedlich groß aus. MRH250 bildet 20km x 20km Kacheln ab, welche die Dateinamen der Digitalen Karte der Metropolregion 1: 250 000 (MRH250) beinhalten.

Raw data of physical oceanography during RV HEINCKE cruise HE571

Raw physical oceanography data was acquired by a ship-based Seabird SBE911plus CTD-Rosette system onboard RV HEINCKE . The CTD was equipped with duplicate sensors for temperature (SBE3plus) and conductivity (SBE4) as well as one sensor for oxygen (SBE43). Additional sensors such as a WET Labs C-Star transmissometer, a WET Labs ECO-AFL fluorometer (FLRTD) and an altimeter (Teledyne Benthos PSA-916) were mounted to the CTD. The data was recorded using pre-cruise calibration coefficients. No correction, post-cruise calibration or quality control was applied. Processed profile data are available via the link below.

Raw data of physical oceanography during RV HEINCKE cruise HE583

Raw physical oceanography data was acquired by a ship-based Seabird SBE911plus CTD-Rosette system onboard RV HEINCKE . The CTD was equipped with duplicate sensors for temperature (SBE3plus) and conductivity (SBE4) as well as one sensor for oxygen (SBE43). Additional sensors such as a WET Labs C-Star transmissometer, a WET Labs ECO-AFL fluorometer (FLRTD) and an altimeter (Teledyne Benthos PSA-916) were mounted to the CTD. The data was recorded using pre-cruise calibration coefficients. No correction, post-cruise calibration or quality control was applied. Processed profile data are available via the link below.

Raw data of physical oceanography during RV HEINCKE cruise HE461

Raw physical oceanography data was acquired by a ship-based Seabird SBE911plus CTD-Rosette system onboard RV HEINCKE. The CTD was equipped with duplicate sensors for temperature (SBE3plus) and conductivity (SBE4) as well as one sensor for oxygen (SBE43). Additional sensors such as a WET Labs C-Star transmissometer, a WET Labs ECO-AFL fluorometer (FLRTD) and an altimeter (Teledyne Benthos PSA-916) were mounted to the CTD. The data was recorded using pre-cruise calibration coefficients. No correction, post-cruise calibration or quality control was applied. Processed profile data are available via the link below.

Physical oceanography during RV HEINCKE cruise HE618

Conductivity-temperature-depth profiles were measured using a Seabird SBE 911plus CTD during RV HEINCKE cruise HE618. The CTD was equipped with duplicate sensors for temperature (SBE3plus), conductivity (SBE4) and oxygen (SBE43). Additional sensors such as a WET Labs C-Star transmissometer, a WET Labs ECO-AFL fluorometer and an altimeter (PSA-916 Teledyne (Benthos)) were mounted to the CTD. Temperature, conductivity and oxygen sensors are calibrated by the manufacturer once a year before being mounted in January. They are used throughout the year and no post-cruise or in-situ calibration is applied. All other sensors are calibrated irregularly. Data were connected to the station book of the specific cruise as available in the DSHIP database. Processing of the data including removal of obvious outliers followed the procedures described in CTD Processing Logbook of RV HEINCKE (hdl:10013/epic.47427). The processing report for this dataset is linked below.

1 2 3 4 5 … 63 64 65