Das Projekt "Fuel-Switch Project in the North-West of Russia" wird vom Umweltbundesamt gefördert und von GFA Envest GmbH durchgeführt. The objective of the JI project was to replace the outdated and inefficient municipal heating installations running on coal by modern wood-fired boilers. Replacement has been done for the 43 MW capacity required for the heat supply to a town. As the wood fuel comes from sustainably managed forests GHG emissions from coal firing are avoided. Additionally, methane emissions from landfills are prevented. GFA ENVEST developed the Joint Implementation Project according to the UNFCCC modalities, covering the renewable energy component and the methane emission reduction component.The Onega JI project was the second Russian JI project that passed the JI validation process. Services provided: Identification of Project Location. Biomass Supply Assessment: Location analysis/forest resource analysis; Standing forest stock; Review of available waste wood stocks in the region; Economic and Financial Feasibility: Analysis of carbon and biomass benefits; Analysis of switching fuel systems in the identified location. Baseline Study Package for the Fuel-Switch Project: Environmental Assessment; Social Assessment; Review of the legislation to facilitate the switching of fuel source for heating purposes; Review current legislation and regulation of the energy, forestry, and environmental sectors as well as all regulations and laws affecting budgetary process and use by government of additional revenues; Intergrated stakeholder consultations. Baseline Study (BLS): Monitoring plan; Emission Reduction and Sequestration Study (ERSS); projections of the ERs that can reasonably be expected to be generated by the Project; Support for permissions, approvals and registration of the Joint Implementation project by relevant national and international authorities; Support to the project investor on monitoring and verification of emission reductions; accompanying Designated Operational Entity during the verification process; Marketing of Emission Reduction Units and Voluntary Emission Reductions on behalf of project investor; Assistance to the project investor during Emission Reduction Purchase Agreement negotiations.
Das Projekt "European Sub-Polar Oceans Project, ESOP-2" wird vom Umweltbundesamt gefördert und von Universität Hamburg, Zentrum für Meeres- und Klimaforschung, Institut für Meereskunde (IfM) durchgeführt. The goal of the ESOP-II project, funded by the European Unions MAST III programme, is to understand the thermohaline circulation in the Greenland Sea, its sensitivity, and impact on global ocean circulation, building on an unique combination of novel experimental techniques, modelling and experience, gained under ESOP-1. The project is a consortium of scientists from 21 laboratories in 8 European countries (D, DK, F, Iceland, I, N, UK, S). The focus of ESOP-2 is to study the formation of deep water in the Greenland sea, one of the most active regions in the world's oceans for this process. Deep water formation in the Nordic Seas drives the global 'Conveyor-belt', that is recognized to be relevant to climate and climate change.
Das Projekt "Grey water treatment in upflow anaerobic sludge blanket (UASB) reactor" wird vom Umweltbundesamt gefördert und von Technische Universität Hamburg-Harburg, Institut für Abwasserwirtschaft und Gewässerschutz B-2 durchgeführt. In ecological sanitation, the wastewater is considered not only as a pollutant, but also as a resource for fertiliser, water and energy and for closing water and nutrients cycles (Otterpohl et. al., 1999; Otterpohl et. al., 2003; Elmitwalli et al. 2005). The ecological sanitation based on separation between grey and black water (and even between faeces and urine), is considered a visible future solution for wastewater collection and treatment. Grey water, which symbolises the wastewater generated in the household excluding toilet wastewater (black water), represents the major volume of the domestic wastewater (60- 75 percent) with low content of nutrients and pathogens (Otterpohl et. al., 1999; Jefferson et al., 1999; Eriksson et al., 2002). Most of grey-water treatment plants include one or two-step septic-tank for pre-treatment (Otterpohl et al., 2003). The grey-water treatment needs both physical and biological processes for removal of particles, dissolved organic-matters and pathogens (Jefferson et al., 1999). Recently, many researchers have studied the grey-water treatment either by application of high-rate aerobic systems, like rotating biological contactor (Nolde, 1999), fluidised bed (Nolde, 1999), aerobic filter (Jefferson et al., 2000), membrane bioreactor (Jefferson et al., 2000), or by application of low-rate systems, like slow sand filter (Jefferson et al., 1999), vertical flow wetlands (Otterpohl et. al., 2003). Although high-rate anaerobic systems, which are low-cost systems, have both physical and biological removal, no research has been done until now on grey water in these systems. The grey water contains a significant amount (41 percent) of chemical oxygen demand (COD) in the domestic wastewater (Otterpohl et al., 2003) and this amount can be removed by the highrate anaerobic systems. Although high-rate anaerobic systems have been successfully operated in tropical regions for domestic wastewater treatment, the process up till now is not applied in lowtemperature regions. The COD removal is limited for domestic wastewater treatment in high-rate anaerobic systems at low temperatures and, therefore, a long HRT is needed for providing sufficient hydrolysis of particulate organic (Zeeman and Lettinga, 1999; Elmitwalli et al. 2002). The grey water has a relatively higher temperature (18-38 degree C), as compared to the domestic wastewater (Eriksson et al. 2002), because the grey water originates from hot water sources, like shower (29 degree C), kitchen (27-38 degree C) and laundry (28-32 degree C). Therefore, high-rate anaerobic systems might run efficiently for on-site grey water treatment, even in low-temperature regions. The upflow anaerobic sludge blanket (UASB) reactor is the most applied system for anaerobic domestic waster treatment. Accordingly, the aim of this research is to study the feasibility of application of UASB reactor for the treatment of grey water at low and controlled (30 degree C) temperatures.
Das Projekt "Litter decomposition in mixed spruce-beech stands" wird vom Umweltbundesamt gefördert und von Universität Freiburg, Waldbau-Institut durchgeführt. It is the declared aim of many state forest agencies to convert monocultures of Norway spruce (Picea abies), which are wide-spread in central Europe, to mixed stands of spruce and broadleaved trees, which in most cases would be European beech (Fagus sylvatica). Mixed species stands of these species may have a higher degree of ecological stability because they are less susceptible to windthrow and because nutrient cycling is tighter than in pure stands of spruce. Needle litter of Norway spruce is often less decomposable as that of the original forest, which was replaced by the plantations. As a result the forest floor layer tends to accumulate in many spruce monocultures. The build-up of the forest floor to humus forms such as moder and raw humus represents unfavourable biological soil conditions and a partial discoupling of the nutrient cycling. Additional consequences of this process may be soil acidification and podzolisation in pure spruce stands, which may further destabilise ecosystem processes. Introduction of beech, which can provide leaf litter of greater decomposability may reverse these processes and lead to more favourable humus forms that represent greater biological activity. However, it has been shown that the admixture of beech to spruce effectively leads to a reduced forest floor layer only for some soil types. This points to the importance of identifying the soil types and stand conditions for which the introduction of beech into spruce forest can lead to a significant improvement of the humus form and thus nutrient cycling. The proposed work will contribute to this by identifying sites, where admixture of F. sylvatica to P. abies stands will improve litter decomposition and thus the humus form. Specifically the research will examine how a range of environmental and litter quality factors influence the decomposition of beech and spruce litter, how litter quality is influenced by site quality, and what proportions of beech litter of a certain quality may be required to improve spruce needle decomposition.
Das Projekt "Soil-gas transport-processes as key factors for methane oxidation in soils" wird vom Umweltbundesamt gefördert und von Universität Freiburg, Institut für Geo- und Umweltnaturwissenschaften, Professur für Bodenökologie durchgeführt. Methane (CH4) is a major greenhouse gas of which the atmospheric concentration has more than doubled since pre-industrial times. Soils can act as both, source and sink for atmospheric CH4, while upland forest soils generally act as CH4 consumers. Oxidation rates depend on factors influenced by the climate like soil temperature and soil moisture but also on soil properties like soil structure, texture and chemical properties. Many of these parameters directly influence soil aeration. CH4 oxidation in soils seems to be controlled by the supply with atmospheric CH4, and thus soil aeration is a key factor. We aim to investigate the importance of soil-gas transport-processes for CH4 oxidation in forest soils from the variability the intra-site level, down to small-scale (0.1 m), using new approaches of field measurements. Further we will investigate the temporal evolution of soil CH4 consumption and the influence of environmental factors during the season. Based on previous results, we hypothesize that turbulence-driven pressure-pumping modifies the transport of CH4 into the soil, and thus, also CH4 consumption. To improve the understanding of horizontal patterns of CH4 oxidation we want to integrate the vertical dimension on the different scales using an enhanced gradient flux method. To overcome the constraints of the classical gradient method we will apply gas-diffusivity measurements in-situ using tracer gases and Finite-Element-Modeling. Similar to the geophysical technique of Electrical Resistivity Tomography we want to develop a Gas Diffusivity Tomography. This will allow to derive the three-dimensional distribution of soil gas diffusivity and methane oxidation.
Das Projekt "Forest management in the Earth system" wird vom Umweltbundesamt gefördert und von Max-Planck-Institut für Meteorologie durchgeführt. The majority of the worlds forests has undergone some form of management, such as clear-cut or thinning. This management has direct relevance for global climate: Studies estimate that forest management emissions add a third to those from deforestation, while enhanced productivity in managed forests increases the capacity of the terrestrial biosphere to act as a sink for carbon dioxide emissions. However, uncertainties in the assessment of these fluxes are large. Moreover, forests influence climate also by altering the energy and water balance of the land surface. In many regions of historical deforestation, such biogeophysical effects have substantially counteracted warming due to carbon dioxide emissions. However, the effect of management on biogeophysical effects is largely unknown beyond local case studies. While the effects of climate on forest productivity is well established in forestry models, the effects of forest management on climate is less understood. Closing this feedback cycle is crucial to understand the driving forces behind past climate changes to be able to predict future climate responses and thus the required effort to adapt to it or avert it. To investigate the role of forest management in the climate system I propose to integrate a forest management module into a comprehensive Earth system model. The resulting model will be able to simultaneously address both directions of the interactions between climate and the managed land surface. My proposed work includes model development and implementation for key forest management processes, determining the growth and stock of living biomass, soil carbon cycle, and biophysical land surface properties. With this unique tool I will be able to improve estimates of terrestrial carbon source and sink terms and to assess the susceptibility of past and future climate to combined carbon cycle and biophysical effects of forest management. Furthermore, representing feedbacks between forest management and climate in a global climate model could advance efforts to combat climate change. Changes in forest management are inevitable to adapt to future climate change. In this process, is it possible to identify win-win strategies for which local management changes do not only help adaptation, but at the same time mitigate global warming by presenting favorable effects on climate? The proposed work opens a range of long-term research paths, with the aim of strengthening the climate perspective in the economic considerations of forest management and helping to improve local decisionmaking with respect to adaptation and mitigation.
Das Projekt "Tools for Sustainabiltity Impact Assessment of the Forestry- Wood Chain" wird vom Umweltbundesamt gefördert und von Universität Hamburg, Department für Biologie, Zentrum Holzwirtschaft des Johann Heinrich von Thünen-Institut, Bundesforschungsinstitut für Ländliche Räume, Wald und Fischerei durchgeführt. The objective of EFORWOOD is to develop a quantitative decision support tool for Sustainability Impact Assessment of the European Forestry-Wood Chain (FWC) and subsets thereof (e.g. regional), covering forestry, industrial manufacturing, consumption and recycling. The objective will be achieved by:a) defining economic, environmental and social sustainability indicators ,b) developing a tool for Sustainability Impact Assessment by integrating a set of models ,c) supplying the tool with real data, aggregated as needed and appropriate,d) testing the tool in a stepwise procedure allowing adjustments to be made according to the experiences gained,e) applying the tool to assess the sustainability of the present European FWC (and subsets thereof) as well the impacts of potential major changes based on scenarios,f) making the adapted versions of the tool available to stakeholder groupings (industrial, political and others).The multi-functionality of the FWC is taken into account by using indicators to assess the sustainability of production processes and by including in the analysis the various products and services of the FWC. Wide stakeholder consultations will be used throughout the process to reach the objective. EFORWOOD will contribute to EU policies connected to the FWC, especially to the Sustainable Development Strategy. It will provide policy-makers, forest owners, the related industries and other stakeholders with a tool to strengthen the forest-based sector's contribution towards a more sustainable Europe, thereby also improving its competitiveness. To achieve this, EFORWOOD gathers a consortium of highest-class experts, including the most representative forest-based sector confederations.EFORWOOD addresses with a high degree of relevance the objectives set out in the 3rd call for proposals addressing Thematic Sub-priority 1.1.6.3 Global Change and Ecosystems, topic V.2.1. Forestry/wood chain for Sustainable Development. Prime Contractor: Stiftelsen Skogsbrukets Forskningsinstitut, Skogforsk; Uppsala; Sweden.
Das Projekt "Solar Steam Reforming of Methane Rich Gas for Synthesis Gas Production (SOLREF)" wird vom Umweltbundesamt gefördert und von Deutsches Zentrum für Luft- und Raumfahrt, Institut für Technische Thermodynamik, Abteilung Systemanalyse und Technikbewertung durchgeführt. Project main goals: The main purpose of this project is to develop an innovative 400 kWth solar reformer for several applications such as Hydrogen production or electricity generation. Depending of the feed source for the reforming process CO2 emissions can be reduced significantly (up to 40 percent using NG), because the needed process heat for this highly endothermic reaction is provided by concentrated solar energy. A pre-design of a 1 MW prototype plant in Southern Italy and a conceptual layout of a commercial 50 MWth reforming plant complete this project. Key issues: The profitability decides if a new technology has a chance to come into the market. Therefore several modifications and improvements to the state-of-the-art solar reformer technology will be introduced before large scale and commercial system can be developed. These changes are primarily to the catalytic system, the reactor optimisation and operation procedures and the associated optics for concentrating the solar radiation. For the dissemination of solar reforming technology the regions targeted are in Southern Europe and Northern Africa. The potential markets and the impact of infrastructure and administrative restrictions will be assessed. The environmental, socio-economic and institutional impacts of solar reforming technology exploitation will be assessed with respect to sustainable development. The market potential of solar reforming technology in a liberalised European energy market will be evaluated. Detailed cost estimates for a 50 MWth commercial plant will be determined.
Das Projekt "Biomass fluidised bed gasification with in situ hot gas cleaning (AER-GAS II)" wird vom Umweltbundesamt gefördert und von Zentrum für Sonnenenergie- und Wasserstoff-Forschung Baden-Württemberg durchgeführt. Objective: The project aim is a low-cost gasification process with integrated in-situ gas cleaning for the conversion of biomass into a product gas with high hydrogen concentration, high heating value and low tar/alkali/sulphur concentration in one process step for s ubsequent power production. The proposed process uses in-situ CO2 capture (AER, Absorption Enhanced Reforming). It is more efficient than conventional gasification due to (i) the in-situ integration of the reaction heat of CO2 absorption and water-gas shif t reaction heat (both exothermic) into the gasification and (ii) the internal reforming of primary and secondary tars, which cuts off the formation of higher tars. Thus, the chemical energy of tars remains in the product gas. The product gas after dust rem oval can directly be used in a gas engine for electricity generation. Due to the low operation temperature (up to 700 C) and due to CaO-containing bed materials, the proposed process allows the use of problematic feedstocks such as biomass with high minera l and high moisture content, e.g. straw, sewage sludge, etc., leading to an increased market potential for biomass gasification processes. Screening/development of absorbent materials with high attrition stability and tar cracking properties will be carrie d out. Analysis of tar formation/decomposition process will be studied in a lab-scale fixed bed reactor and a 100 kWth circulating fluidised bed reactor (continuous mode). With the acquired data, the 8 MWth biomass plant at Guessing, Austria, will be opera ted with absorbent bed material in order to prove the feasibility of a scale-up and to assess the economical aspects of the process. In order to point out the market potential, the cost reduction of the AER technology will be quantified in comparison with the conventional gasification power plant. Expected results will be: (i) a broad knowledge of the proposed process and (ii) a low-cost technology for biomass gasification with subsequent power production.
Das Projekt "Energy Storage for Direct Steam Solar Power Plants (DISTOR)" wird vom Umweltbundesamt gefördert und von Deutsches Zentrum für Luft- und Raumfahrt e.V., Institut für Technische Thermodynamik durchgeführt. Objective: Solar thermal power plants represent today's most economic systems to generate electricity from solar insulation in them-range in regions like the Mediterranean area. By demonstrating the feasibility of direct steam generation in the absorber pipes European industry and research institutions have gained a leading position in this technology area. A key element foray successful market penetration is the availability of storage systems to reduce the dependence on the course of solarinsolation. The most important benefits result from -reduced internal costs due to increased efficiency and extended utilisation of the power block-facilitating the integration of a solar power plant into an electrical grid-adoption of electricity production to the demand thus increasing revenues Efficient storage systems for steam power plants demand transfer of energy during the charging/discharging process at constant temperatures. The DISTOR project focuses on the development of systems using phase change materials (PCM) as storage media. In order to accelerate the development, the DISTOR project is based on parallel research on three different storage concepts. These concepts include innovative aspects like encapsulated PCM, evaporation heat transfer and new design concepts. This parallel approach takes advantage of synergy effects and will enable the identification of the most promising storage concept. A consortium covering the various aspects of design and manufacturing has been formed from manufacturers, engineering companies and research institutions experienced in solar thermal power plants and PCM technology. The project will provide advanced storage material based on PCM for the temperature range of 200-300 C adapted to the needs of Direct Steam generation thus expanding Europe's strong position in solar thermal power plants.
| Origin | Count |
|---|---|
| Bund | 425 |
| Type | Count |
|---|---|
| Förderprogramm | 425 |
| License | Count |
|---|---|
| open | 425 |
| Language | Count |
|---|---|
| Deutsch | 425 |
| Englisch | 404 |
| Resource type | Count |
|---|---|
| Keine | 327 |
| Webseite | 98 |
| Topic | Count |
|---|---|
| Boden | 389 |
| Lebewesen & Lebensräume | 410 |
| Luft | 327 |
| Mensch & Umwelt | 425 |
| Wasser | 356 |
| Weitere | 425 |