Other language confidence: 0.9428028806929432
The dataset contains major and trace element concentrations measured by inductively coupled plasma optical emission spectrometry (ICP-OES) from water samples collected during a 16-day in-situ incubation experiment in the Baltic Sea (2025-07-12 to 2025-07-29). Samples were collected using an automated glass-syringe sampler deployed within two benthic chambers of a Biogeochemical Observatory (BIGO, Sommer et al., 2009) at 54° 34.432' N, 10° 10.776' E, at 22 m water depth. In one chamber, 29 g of fine calcite powder were added to the bottom water to assess the potential of enhanced benthic calcite weathering as an ocean alkalinity enhancement (OAE) strategy. Seven samples per chamber and from the ambient bottom water were analyzed to trace elemental changes associated with calcite dissolution.
The dataset contains dissolved nutrient concentrations from water samples collected during a 16-day in-situ incubation experiment in the Baltic Sea (2025-07-12 to 2025-07-29). Samples were collected using an automated glass-syringe sampler deployed within two benthic chambers of a Biogeochemical Observatory (BIGO, Sommer et al., 2009) at 54° 34.432' N, 10° 10.776' E, at 22 m water depth. In one chamber, 29 g of fine calcite powder were added to the bottom water as part of an enhanced benthic calcite weathering experiment. Seven samples per chamber and from the ambient bottom water were analyzed to assess potential nutrient fluxes associated with the calcite addition and benthic biogeochemical processes.
The dataset contains total alkalinity measurements from water samples collected during a 16-day in-situ incubation experiment in the Baltic Sea (2025-07-12 to 2025-07-29). Samples were collected using an automated glass-syringe sampler deployed within two benthic chambers of a Biogeochemical Observatory (BIGO, Sommer et al., 2009) at 54° 34.432' N, 10° 10.776' E, at 22 m water depth. In one chamber, 29 g of fine calcite powder were added to the bottom water. Seven samples per chamber and from the ambient bottom water were taken to monitor alkalinity changes resulting from calcite dissolution, providing a direct measure of the ocean alkalinity enhancement (OAE)
The data was produced during a 16 day in-situ incubation experiment in the Baltic Sea. In order to assess the potential for enhanced benthic calcite weathering as a ocean alkalinisation and thus negative emissions strategy, a Biogeochemical Observatory (BIGO, Sommer et al., 2009) was deployed at 54° 34.432 N, 10° 10.776 E, at 22 m water depth between 2025-07-12 and 2025-07-29. The BIGO is equipped with two benthic chambers that were lowerd to the sea floor. In chamber two, 29 g of fine calcite powder were added to the bottom water. 7 Samples were taken via an automatted glassyringe sampler from each chamber and the ambient bottom water.
Enhanced benthic weathering has been proposed to serve as a efficient negative emission strategy. The precise weathering behaviour of calcite and dunite was investigated in long-term experiments in benthocosms. These experiments were conducted between Sept. 2022 and Sept. 2023 ashore at the Kiel Fjord. The latter are large plastic containers (~0.8 m²) that are partly filled with sediments, with constant flow-through of Baltic Sea bottom water. The sediments, obtained from Boknis Eck in the Eckernförde Bay in March 2022, were amended with calcite and dunite in triplicate (22 mol/m² equivalent) . Three additional benthocosms were left unamended to serve as controls. The used materials were obtained from Sibelco (dunite) and from the german Lime Stone Association (calcite). These experiments elucidate the actual weathering behavior of calcite and dunite under conditions as close to the natural system as possible. Samples were obtained using benthic chambers (chamber volume of 400 ml) that were placed on the sediment for three hours. Samples were taken at the beginning (_in) and at the end of the deployment (_out).
Enhanced benthic weathering has been proposed to serve as a efficient negative emission strategy. The precise weatherig behaviour of calcite and dunite was investigated in leng-term experiments in benthocosms. These experiments were conducted between Sept. 2022 and Sept. 2023 ashore at the Kiel Fjord. The latter are large plastic containers (~0.8 m²) that are partly filled with sediments, with constant flow-through of Baltic Sea bottom water. The sediments, obtained from Boknis Eck in the Eckernförde Bay in March 2022, were amended with calcite and dunite in triplicate (22 mol/m² equivalent) . Three additional benthocosms were left unamended to serve as controls. The used materials were obtained from Sibelco (dunite) and from the german Lime Stone Association (calcite). Samples were obtained using benthic chambers (chamber volume of 400 ml) that were placed on the sediment for three hours. Samples were taken at the beginning (_in) and at the end of the deployment (_out). All samples were filtered through a 0.2 µm cellulose membrane filter and refrigerated in 25 ml ZinsserTM scintillation vials. Acidified sub-samples (30 μl suprapure HNO3- + 3 ml sample) were prepared for analyses of major and trace elements (Si, Na, K, Li, B, Mg, Ca, Sr, Mn, Ni and Fe) by inductively coupled plasma optical emission spectroscopy (ICP-OES, Varian 720-ES).
Enhanced benthic weathering has been proposed to serve as a efficient negative emission strategy. The precise weatherig behaviour of calcite and dunite was investigated in leng-term experiments in benthocosms. These experiments were conducted between Sept. 2022 and Sept. 2023 ashore at the Kiel Fjord. The latter are large plastic containers (~0.8 m²) that are partly filled with sediments, with constant flow-through of Baltic Sea bottom water. The sediments, obtained from Boknis Eck in the Eckernförde Bay in March 2022, were amended with calcite and dunite in triplicate (22 mol/m² equivalent) . Three additional benthocosms were left unamended to serve as controls. The used materials were obtained from Sibelco (dunite) and from the german Lime Stone Association (calcite). Samples were obtained using benthic chambers (chamber volume of 400 ml) that were placed on the sediment for three hours. Samples were taken at the beginning (_in) and at the end of the deployment (_out). All samples were filtered through a 0.2 µm cellulose membrane filter and refrigerated in 25 ml ZinsserTM scintillation vials. Samples for total alkalinity (TA) were analyzed directly after sampling by titration of 1 ml of bottom water with 0.02N HCl. Titration was ended when a stable purple color appeared. During titration, the sample was degassed by continuous bubbling with nitrogen to remove any generated CO₂. The acid was standardized using an IAPSO seawater standard.
Enhanced mineral dissolution in the benthic environment is currently discussed as a potential technique for ocean alkalinity enhancement (OAE) to reduce atmospheric carbon dioxide (CO2) levels. This study explores how biogeochemical processes affect the dissolution of alkaline minerals in surface sediments during laboratory incubation experiments. These involved introducing dunite and calcite to organic-rich sediments from the Baltic Sea under controlled conditions in an anoxic to hypoxic environment. The sediment cores were incubated with Baltic Sea bottom water. Eight sediment cores were positioned vertically in a rack. Since the sediment surface was slightly oxidized by the bottom water (∼125 μmol l−1 upon recovery), the cores were left plugged on the top for 13 days to settle after recovery until the sediment surface was anoxic. To achieve chemical conditions that are expected in the natural system, 500l of retrieved sea water were degassed via bubbling with pure dinitrogen gas in batches of 100 l. Afterwards, between 50 and 60 l were transferred into an evacuated gas tight bag. After the transfer, pH and total alkalinity (TA) were measured to determine the dissolved inorganic carbon (DIC) of the water. Afterwards the DIC was increased via adding pure CO2 until a CO2 partial pressure (pCO2 ) of ∼2,300–∼3,300 μatm was established mimicking conditions prevailing in Boknis Eck during summer. Stirring heads were installed on the cores. To prevent the development of oxic conditions, it was ensured that as little gas phase as possible was left in the cores. Elimination of pelagic autotrophs, heterotrophs, and suspended particles was achieved by flushing the cores with modified bottom water for 2 days with a flow rate of 1.5 mml min−1. Afterwards, a continuous throughflow of 700 μl min−1 from the reservoir of modified bottom water was applied, leading to a residence time of ∼2.1 days inside the cores. For the experimental incubations, six cores received additions of alkaline materials, three with calcite (Cal1 - Cal3) and three cores with dunite (Dun1 - Dun3), leading to three replicates per treatment. Two control cores remained untreated (C1, C2). The amount of added substrate was based on the rain rate of particulate organic carbon observed in Boknis Eck (0.5 mmol cm−2 a−). The incubation lasted for 25 days. The volume of water in each core was determined at the end of the experiment via measuring the height of the water column after removing the stirring heads. At the end of the experiments, the bottom water was removed via suction and the cores were sliced for pore water analysis. The pore waters were recovered by centrifuging each respective sediment layer in 50 ml falcon tubes at 3000 rpm for 10 minutes. Afterwards, the supernatant water was transferred to polyethylene (PE) vials in an Ar-filled glove bag to minimize contact with oxygen. All samples were filtered through a 0.2 µm cellulose membrane filter and refrigerated in 25 ml ZinsserTM scintillation vials. TA samples (1 ml) were titrated with 0.02N HCl. For H2S, an aliquot of pore water was diluted. A 5 ml aliquot was frozen directly after the sampling procedure for later nutrient analysis. Nutrient measurements were performed either via manual photometric measurement (NH4) or using a Seal – AnalyticalTM QuAAtro autoanalyzer (PO43-). Samples for TA were analyzed directly after sampling by titration of 1 ml of bottom/pore water with 0.02N HCl. Titration was ended when a stable purple color appeared. During titration, the sample was degassed by continuous bubbling with nitrogen to remove any generated CO2 and H2S. The acid was standardized using an IAPSO seawater standard. Acidified sub-samples (30 μl suprapure HNO3- + 3 ml sample) were prepared for analyses of major and trace elements (Si, Na, K, Li, B, Mg, Ca, Sr, Mn, Ni and Fe) by inductively coupled plasma optical emission spectroscopy (ICP-OES, Varian 720-ES). For H2S, an aliquot of pore water was diluted with appropriate amounts of oxygen-free artificial seawater and the H2S was fixed by immediate addition of zinc acetate gelatin solution
Enhanced mineral dissolution in the benthic environment is currently discussed as a potential technique for ocean alkalinity enhancement (OAE) to reduce atmospheric carbon dioxide (CO2) levels. This study explores how biogeochemical processes affect the dissolution of alkaline minerals in surface sediments during laboratory incubation experiments. These involved introducing dunite and calcite to organic-rich sediments from the Baltic Sea under controlled conditions in an anoxic to hypoxic environment. The sediment cores were incubated with Baltic Sea bottom water. Eight sediment cores were positioned vertically in a rack. Since the sediment surface was slightly oxidized by the bottom water (∼125 μmol l−1 upon recovery), the cores were left plugged on the top for 13 days to settle after recovery until the sediment surface was anoxic. To achieve chemical conditions that are expected in the natural system, 500l of retrieved sea water were degassed via bubbling with pure dinitrogen gas in batches of 100 l. Afterwards, between 50 and 60 l were transferred into an evacuated gas tight bag. After the transfer, pH and total alkalinity (TA) were measured to determine the dissolved inorganic carbon (DIC) of the water. Afterwards the DIC was increased via adding pure CO2 until a CO2 partial pressure (pCO2 ) of ∼2,300–∼3,300 μatm was established mimicking conditions prevailing in Boknis Eck during summer. Stirring heads were installed on the cores. To prevent the development of oxic conditions, it was ensured that as little gas phase as possible was left in the cores. Elimination of pelagic autotrophs, heterotrophs, and suspended particles was achieved by flushing the cores with modified bottom water for 2 days with a flow rate of 1.5 mml min−1. Afterwards, a continuous throughflow of 700 μl min−1 from the reservoir of modified bottom water was applied, leading to a residence time of ∼2.1 days inside the cores. For the experimental incubations, six cores received additions of alkaline materials, three with calcite (Cal1 - Cal3) and three cores with dunite (Dun1 - Dun3), leading to three replicates per treatment. Two control cores remained untreated (C1, C2). The amount of added substrate was based on the rain rate of particulate organic carbon observed in Boknis Eck (0.5 mmol cm−2 a−). The incubation lasted for 25 days. The volume of water in each core was determined at the end of the experiment via measuring the height of the water column after removing the stirring heads. Bottom water samples were taken from the outflow of each core over a time period of several hours. Thus, samples represent the average outflow over the respective time period. Sampling intervals increased from daily during the first two weeks to every three to four days and weekly towards the end of the experiment. All samples were filtered through a 0.2 µm cellulose membrane filter and refrigerated in 25 ml ZinsserTM scintillation vials. Samples for TA were analyzed directly after sampling by titration of 1 ml of bottom water with 0.02N HCl. Titration was ended when a stable purple color appeared. During titration, the sample was degassed by continuous bubbling with nitrogen to remove any generated CO2 and H2S. The acid was standardized using an IAPSO seawater standard. Acidified sub-samples (30 μl suprapure HNO3- + 3 ml sample) were prepared for analyses of major and trace elements (Si, Na, K, Li, B, Mg, Ca, Sr, Mn, Ni and Fe) by inductively coupled plasma optical emission spectroscopy (ICP-OES, Varian 720-ES).
Enhanced mineral dissolution in the benthic environment is currently discussed as a potential technique for ocean alkalinity enhancement (OAE) to reduce atmospheric carbon dioxide (CO2) levels. This study explores how biogeochemical processes affect the dissolution of alkaline minerals in surface sediments during laboratory incubation experiments. These involved introducing dunite and calcite to organic-rich sediments from the Baltic Sea under controlled conditions in an anoxic to hypoxic environment. The sediment cores were incubated with Baltic Sea bottom water. Eight sediment cores were positioned vertically in a rack. Since the sediment surface was slightly oxidized by the bottom water (∼125 μmol l−1 upon recovery), the cores were left plugged on the top for 13 days to settle after recovery until the sediment surface was anoxic. To achieve chemical conditions that are expected in the natural system, 500l of retrieved sea water were degassed via bubbling with pure dinitrogen gas in batches of 100 l. Afterwards, between 50 and 60 l were transferred into an evacuated gas tight bag. After the transfer, pH and total alkalinity (TA) were measured to determine the dissolved inorganic carbon (DIC) of the water. Afterwards the DIC was increased via adding pure CO2 until a CO2 partial pressure (pCO2 ) of ∼2,300–∼3,300 μatm was established mimicking conditions prevailing in Boknis Eck during summer. Stirring heads were installed on the cores. To prevent the development of oxic conditions, it was ensured that as little gas phase as possible was left in the cores. Elimination of pelagic autotrophs, heterotrophs, and suspended particles was achieved by flushing the cores with modified bottom water for 2 days with a flow rate of 1.5 mml min−1. Afterwards, a continuous throughflow of 700 μl min−1 from the reservoir of modified bottom water was applied, leading to a residence time of ∼2.1 days inside the cores. For the experimental incubations, six cores received additions of alkaline materials, three with calcite (Cal1 - Cal3) and three cores with dunite (Dun1 - Dun3), leading to three replicates per treatment. Two control cores remained untreated (C1, C2). The amount of added substrate was based on the rain rate of particulate organic carbon observed in Boknis Eck (0.5 mmol cm−2 a−). The incubation lasted for 25 days. The volume of water in each core was determined at the end of the experiment via measuring the height of the water column after removing the stirring heads. Bottom water samples were taken from the outflow of each core over a time period of several hours. Thus, samples represent the average outflow over the respective time period. Sampling intervals increased from daily during the first two weeks to every three to four days and weekly towards the end of the experiment. All samples were filtered through a 0.2 µm cellulose membrane filter and refrigerated in 25 ml ZinsserTM scintillation vials. A 5 ml aliquot was frozen directly after the sampling procedure for later nutrient analysis. Nutrient measurements were performed either via manual photometric measurement (NH4) or using a Seal – AnalyticalTM QuAAtro autoanalyzer (PO43-). Samples for TA were analyzed directly after sampling by titration of 1 ml of bottom/pore water with 0.02N HCl. Titration was ended when a stable purple color appeared. During titration, the sample was degassed by continuous bubbling with nitrogen to remove any generated CO2 and H2S. The acid was standardized using an IAPSO seawater standard. Acidified sub-samples (30 μl suprapure HNO3- + 3 ml sample) were prepared for analyses of major and trace elements (Si, Na, K, Li, B, Mg, Ca, Sr, Mn, Ni and Fe) by inductively coupled plasma optical emission spectroscopy (ICP-OES, Varian 720-ES). At the end of the experiments, the bottom water was removed via suction and the cores were sliced for pore water analysis. The pore waters were recovered by centrifuging each respective sediment layer in 50 ml falcon tubes at 3000 rpm for 10 minutes. Afterwards, the supernatant water was transferred to polyethylene (PE) vials in an Ar-filled glove bag to minimize contact with oxygen. TA samples (1 ml) were titrated with 0.02N HCl. In addition to the parameters listed above, pore waters were analyzed for H2S and Fe2+. For the analysis of dissolved Fe2+ concentrations, sub-samples of 1 ml were taken within the glove bag, immediately stabilized with ascorbic acid and analyzed within 30 minutes after complexation with 20 μl of Ferrozin. For H2S, an aliquot of pore water was diluted with appropriate amounts of oxygen-free artificial seawater and the H2S was fixed by immediate addition of zinc acetate gelatin solution.
| Organisation | Count |
|---|---|
| Bund | 4 |
| Wissenschaft | 14 |
| Type | Count |
|---|---|
| Daten und Messstellen | 14 |
| License | Count |
|---|---|
| Offen | 14 |
| Language | Count |
|---|---|
| Englisch | 14 |
| Resource type | Count |
|---|---|
| Archiv | 4 |
| Datei | 10 |
| Topic | Count |
|---|---|
| Boden | 13 |
| Lebewesen und Lebensräume | 7 |
| Luft | 14 |
| Mensch und Umwelt | 14 |
| Wasser | 14 |
| Weitere | 14 |