Other language confidence: 0.9502812951036701
In this dataset we provide top-view photos and perspective photos (to create topographic data, i.e. Digital Elevation Models, DEMs) documenting analogue model deformation. For more details on modelling setup, experimental series Wang et al. (2021), to which this dataset is supplementary material. For details on analogue materials refer to Del Ventisette et al., 2019, Maestrelli et al. (2020). The analogue modelling experiments were carried out at the TOOLab (Tectonic Modelling Laboratory) of the Institute of Geosciences and Earth Resources of the National Research Council of Italy, Italy, and the Department of Earth Sciences of the University of Florence. The laboratory work that produced these data was supported by the European Plate Observing System (EPOS) and by the Joint Research Unit (JRU) EPOS Italia. Additional analysis, following the original work, was supported by the “Monitoring Earth’s Evolution and Tectonics” (MEET) project
This dataset includes raw data used in the paper by Reitano et al. (2020), focused on the effect of different analogue materials on the mechanical and erosional properties of some defined samples. The samples are mixes of three different analogue materials in various proportions. The experiments have been carried out at Laboratory of Experimental Tectonics (LET), University “Roma Tre” (Rome). Detailed descriptions of the experimental apparatus and experimental procedures implemented can be found in the paper to which this dataset refers. We used the MATLAB toolbox “TopoToolbox” (Schwanghart and Scherler, 2014). Here we present: - Pictures recording the evolution of the models. - Laser scans used for further analysis. - Scripts created ad hoc by the authors and used for analyzing and plotting the data. A detailed methodological description can be found in the associated "2020-021_Reitano-et-al_Dataset decription" pdf file.
This data set includes videos depicting the surface evolution of 29 analogue models on crustal extension, as well as 4D CT imagery (figures and videos) of two of these experiments. The experiments examined the influence of the method for driving extension (orthogonal or rotational) on the interaction between rift segments using a brittle-viscous set-up. All experiments were performed at the Tectonic Modelling Laboratory of the University of Bern, Bern, Switzerland (UB). Brittle and viscous layers are both 4 cm thick, extension velocities are 8 mm/h so that a model duration of 5 h yields a total extension of 40 mm (e = ca. 13%, given an initial model width of ca. 30 mm). Next to the mode of extension (orthogonal or rotational), we also test the effect of the degree of onderlap (angle φ). Detailed descriptions of the experiments and monitoring techniques can be found in Zwaan et al. (2020).
This data set includes the results of digital image correlation of one experiment on subduction megathrust earthquakes with interacting asperities performed at the Laboratory of Experimental Tectonics (LET) Univ. Roma Tre in the framework of AspSync, the Marie Curie project (grant agreement 658034) lead by F. Corbi in 2016-2017. Detailed descriptions of the experiments and monitoring techniques can be found in Corbi et al. (2017 and 2019) to which this data set is supplementary material.We here provide Digital Image Correlation (DIC) data relative to a 7 min long interval during which the experiment produces 40 seismic cycles with average duration of about 10.5 s (see Figure S1 in Corbi et al., 2019). The DIC analysis yields quantitative about the velocity field characterizing two consecutive frames, measured in this case at the model surface. For a detailed description of the experimental procedure, set-up and materials used, please refer to the article of Corbi et al. (2017) paragraph 2. This data set has been used for: a) studying the correlation between apparent slip-deficit maps and earthquake slip pattern (see Corbi et al., 2019; paragraph 4); and b) as input for the Machine Learning investigation (see Corbi et al., 2019; paragraph 5).Further technical information about the methods, data products and matlab scripts is proviced in the data description file. The list of files explains the file and folder structure of the data set.
This dataset includes the results of Particle Image Velocimetry (PIV) of one experiment on subduction megathrust earthquakes (with interacting asperities) performed at the Laboratory of Experimental Tectonics (LET) Univ. Roma Tre in the framework of AspSync, the Marie Curie project (grant agreement 658034; https://aspsync.wordpress.com). Detailed descriptions of the experiments and monitoring techniques can be found in Corbi et al. (2017). This data set is from one experiment characterized by the presence of a 7 cm wide barrier separating two asperities with equal size, geometry and friction. Here we provide PIV data relative to a 16.3 min long interval during which the experiment produces 138 analog earthquakes with an average recurrence time of 7 s. The PIV analysis yields quantitative information about the velocity field characterizing two consecutive frames, measured in this case at the model surface. For a detailed description of the experimental procedure, set-up and materials used, please refer to the article of Corbi et al. (2017) paragraph 2. This data set has been used for: a) studying velocity variations (Fig. 2 in Corbi et al., 2021) and rupture patterns (Fig. 3a, b in Corbi et al., 2021) occurring during the velocity peak of one of the two asperities (aka trigger).
This data set includes images and videos depicting the evolution of deformation and topography of 17 analogue experiments c passive margin development, to better understand the ongoing tectonics along the western margin of Afar, East Africa. The tectonic background that forms the basis for the experimental design is found in Zwaan et al. 2019 and 2020a-b, and references therein. The experiments, in an enhanced gravity field in a large-capacity centrifuge, examined the influence of brittle layer thickness, strength contrast, syn-rift sedimentation and oblique extension on a brittle-viscous system with a strong and weak viscous domain. All experiments were performed at the Tectonic Modelling Laboratory of of the Istituto di Geoscience e Georisorse - Consiglio Nazionale delle Ricerche (CNR-IGG) and of the Earth Sciences Department of the University of Florence (CNR/UF). The brittle layer (sand) thickness ranged between 6 and 20 mm, the underlying viscous layer, split in a competent and weak domain (both viscous mixtures), was always 10 mm thick. Asymmetric extension was applied by removing a 1.5 mm thick spacer at the side of the model at every time step, allowing the analogue materials to spread when enhanced gravity was applied during a centrifuge run. Differential stretching of the viscous material creates flexure and faulting in the overlying brittle layer. Total extension amounted to 10.5 mm over 7 intervals for Series 1 models that aimed at understanding generic passive margin development in a generic orthogonal extension setting, whereas up to 16.5 mm of extension was applied for the additional Series 2 models aiming at reproducing the tectonic phases in Afar. In models involving sedimentation, sand was filled in at time steps 2, 4 and 6 (i.e. after 3, 6 and 9 mm of extension). Detailed descriptions of the experiments, monitoring techniques and tectonic interpretation of the model results are presented in Zwaan et al. (2020c) to which these data are supplementary.
This data set includes videos depicting the surface evolution (time-lapse photographs and Particle Image Velocimetry or PIV analysis) of 38 analogue models, in five model series (A-E), simulating rift tectonics. In these experiments we examined the influence of differently oriented mantle and crustal weaknesses on rift system development during multiphase rifting (i.e. rifting involving changing divergence directions or -rates) using brittle-viscous set-ups. All experiments were performed at the Tectonic Modelling Laboratory of the University of Bern (UB). The brittle and viscous layers, representing the upper an lower crust, were 3 cm and 1 cm thick, respectively, whereas a mantle weakness was simulated using the edge of a moving basal plate (a velocity discontinuity or VD). Crustal weaknesses were simulated using “seeds” (ridges of viscous material at the base of the brittle layers that locally weaken these brittle layers). The divergence rate for the Model A reference models was 20 mm/h so that the model duration of 2:30 h yielded a total divergence of 5 cm (so that e = 17%, given an initial model width of ca. 30 cm). Multiphase rifting model series B and C involved both a slow (10 mm/h) and fast (100 mm/h) rifting phase of 2.5 cm divergence each, for a total of 5 cm of divergence over a 2:45 h period. Multiphase rifting models series D and E had the same divergence rates (20 mm/h) as the Series A reference models, but involved both an orthogonal (α = 0˚) and oblique rifting (α = 30˚) phase of 2.5 cm divergence each, for a total of 5 cm of divergence over a 2:30 h period. In our models the divergence obliquity angle α was defined as the angle between the normal to the central model axis and the direction of divergence. The orientation and arrangements of the simulated mantle and crustal weaknesses is defined by angle θ (defined as the direction of the weakness with respect to the model axis. An overview of model parameters is provided in Table 1, and detailed descriptions of the model set-up and results, as well as the monitoring techniques can be found in Zwaan et al. (2021).
In this dataset we provide data for 6 experimental models of caldera collapse and subsequent resurgence monitored through geophysical sensors (a force or “impact sensor”, Piezotronics PCB 104 200B02 and a Triaxial piezoelectric accelerometer, Model 356B18). The analogue modelling experiments were carried out at the TOOLab (Tectonic Modelling Laboratory), which is a joint laboratory between the Istituto di Geoscienze e Georisorse of the Consiglio Nazionale delle Ricerche, Italy and the Department of Earth Sciences of the University of Florence. The laboratory work that produced these data was partly supported by the European Plate Observing System (EPOS), by the Joint Research Unit (JRU) EPOS Italia and by the “Monitoring Earth's Evolution and Tectonics” (MEET) project (NextGenerationEU). Specifically, this work was performed in the frame of the DynamiCal project, funded by the 2° TNA-NOA call of the ILGE-MEET project.
This data set includes results from a total of 13 analogue tectonic models aimed at simulating the activation of tectonic lineaments associated with the Main Ethiopian Rift in eastern Africa. We use a model set-up based on previous work by Zwaan et al. (2021, 2022). This set-up involves a velocity discontinuity (VD, i.e., the edge of a mobile base plate) to induce extension in the overlying brittle- and viscous model materials representing the upper and lower crust, respectively. Additional structural weaknesses (seeds) at the base of the brittle layer serve to represent activated tectonic weaknesses in nature. Model parameters (different VD and seed orientation, and different seed diameters) are summarized in Table 1. The model results presented in this data publication are obtained through Digital Image Correlation (DIC) and Structure-from-Motion (SfM) analyses. A more detailed description of model set-up, model results, and their interpretation can be found in Zwaan et al. (2025)
We provide particle image correlation data from the 16 laboratory experiments with Foamquake seismotectonic model simulating analog megathrust seismic cycles and supporting scripts. To monitor analog seismic cycles, we use a high-resolution camera taking images at 50 frames per second as an analog of a geodetic satellite. We are using a trench orthogonal surface velocity time series extracted from the central points located above the seismic asperities using Particle Image Velocimetry (PIV) method. The scripts and datasets are provided as supplementary materials to the article "Neighbouring segments control on earthquake recurrence patterns: Insights from scaled seismotectonic models" by Latypova et al., 2025. The data originate from analog experiments using the Foamquake seismotectonic model, designed at the Laboratory of Experimental Tectonics (LET) at Roma Tre University to replicate megathrust seismic cycles. Observations were recorded with a high-resolution camera, and surface velocity fields were extracted using the Particle Image Velocimetry (PIV) technique, which applies cross-correlation between consecutive frames.
| Organisation | Count |
|---|---|
| Wissenschaft | 14 |
| Type | Count |
|---|---|
| unbekannt | 14 |
| License | Count |
|---|---|
| Offen | 14 |
| Language | Count |
|---|---|
| Englisch | 14 |
| Resource type | Count |
|---|---|
| Keine | 14 |
| Topic | Count |
|---|---|
| Boden | 6 |
| Lebewesen und Lebensräume | 3 |
| Luft | 2 |
| Mensch und Umwelt | 12 |
| Wasser | 5 |
| Weitere | 14 |