API src

Found 46 results.

Other language confidence: 0.8472799540870664

Methane measurements at lander_2 in a coastal peatland at the German Baltic Sea in 2021

Rewetting peatlands is an important measure to reduce greenhouse gas (GHG) emissions. However, after rewetting, the areas are highly heterogeneous in terms of GHG exchange, which depends on water level and source, vegetation, previous use, and duration of rewetting. These challenging conditions require new technologies that go beyond discrete sampling. Here we present data from two autonomous lander platforms deployed at the sediment-water interface (bottom lander) of a shallow coastal peatland (approx. 1 m water depth) that was rewetted by brackish water from the Baltic Sea, thus becoming part of the coastal water through a permanent connection. These landers were equipped with six commercially available state-of-the-art sensors, and temporal high-resolution measurements of physico-chemical variables, including partial pressures of carbon dioxide (CO2) and methane (CH4), were made. The resolution of the field data ranged from 10 seconds to 120 minutes and was obtained for partial pressure of CO2 (Contros HydroC-CO2) and CH4 (Contros HydroC-CH4), temperature, salinity, pressure (water depth), oxygen (O2) (CTD-O2 with SBE-37SMP-ODO), the concentrations of phosphate (SBE HydroCycle PO4), nitrate (SBE SUNA V2), chlorophyll a and the turbidity (both with SBE-FLNTUSB ECO) as stationary measurements at two different locations in close proximity. The CTD and oxygen measurements provide exact water depth data for the respective lander locations. In the other data sets (e.g., CO2 measurements) rounded data are inserted instead of the exact depth data, which is 0.6 m for lander_1 and 0.9 m for lander_2. SUNA raw data are provided for completeness. However, we found them of insufficient quality to estimate nitrate concentrations due to interferences and biofouling. The deployment and recovery of the landers, and thus the measurements, took place between 02 June 2021 and 09 August 2021, and the sensors were operated under permanent wired power supply and a centralized timestamp. The sensors were maintained and cleaned bi-weekly. Results show considerable temporal fluctuations expressed as multi-day, diurnal, and event-based variability, with spatial differences caused by biologically-dominated variables.

Methane measurements at lander_1 in a coastal peatland at the German Baltic Sea in 2021

Rewetting peatlands is an important measure to reduce greenhouse gas (GHG) emissions. However, after rewetting, the areas are highly heterogeneous in terms of GHG exchange, which depends on water level and source, vegetation, previous use, and duration of rewetting. These challenging conditions require new technologies that go beyond discrete sampling. Here we present data from two autonomous lander platforms deployed at the sediment-water interface (bottom lander) of a shallow coastal peatland (approx. 1 m water depth) that was rewetted by brackish water from the Baltic Sea, thus becoming part of the coastal water through a permanent connection. These landers were equipped with six commercially available state-of-the-art sensors, and temporal high-resolution measurements of physico-chemical variables, including partial pressures of carbon dioxide (CO2) and methane (CH4), were made. The resolution of the field data ranged from 10 seconds to 120 minutes and was obtained for partial pressure of CO2 (Contros HydroC-CO2) and CH4 (Contros HydroC-CH4), temperature, salinity, pressure (water depth), oxygen (O2) (CTD-O2 with SBE-37SMP-ODO), the concentrations of phosphate (SBE HydroCycle PO4), nitrate (SBE SUNA V2), chlorophyll a and the turbidity (both with SBE-FLNTUSB ECO) as stationary measurements at two different locations in close proximity. The CTD and oxygen measurements provide exact water depth data for the respective lander locations. In the other data sets (e.g., CO2 measurements) rounded data are inserted instead of the exact depth data, which is 0.6 m for lander_1 and 0.9 m for lander_2. SUNA raw data are provided for completeness. However, we found them of insufficient quality to estimate nitrate concentrations due to interferences and biofouling. The deployment and recovery of the landers, and thus the measurements, took place between 02 June 2021 and 09 August 2021, and the sensors were operated under permanent wired power supply and a centralized timestamp. The sensors were maintained and cleaned bi-weekly. Results show considerable temporal fluctuations expressed as multi-day, diurnal, and event-based variability, with spatial differences caused by biologically-dominated variables.

Nitrate raw measurements at lander 2 in the German Baltic Sea

Coastal ecosystems are heterogeneous environments with high turnover rates of carbon and nutrients that influence the distribution of greenhouse gases (GHG). They also represent challenging environments for scientific investigations, requiring new technologies that go beyond discrete sampling. Here we present temporal high-resolution measurements of several physicochemical variables, including the partial pressures of CO2 and CH4, made in shallow waters at around 6 m water depth of the Baltic Sea using two autonomous lander systems. The two landers were deployed at the sediment-water interface (bottom lander) and about 400 m offshore near the German city Rostock with support from the buoy tender “Rosenort” operated by the Wasserstraßen- und Schifffahrtsverwaltung des Bundes, Stralsund (WSA Stralsund). These landers were equipped with six commercially available state-of-the-art sensors. Field data resolution ranged from 10 seconds to 60 minutes and was obtained for partial pressure of CO2 (Contros HydroC-CO2) and CH4 (Contros HydroC-CH4), temperature, salinity, depth (hydrostatic pressure), O2 (CTD-O2 with SBE-37SMP-ODO), the concentrations of phosphate (SBE HydroCycle PO4), nitrate (SBE SUNA V2), chlorophyll a and the turbidity (both with SBE-FLNTUSB ECO) as stationary measurements at two different locations in close proximity. The CTD and oxygen measurements provide exact water depth data for the respective lander locations. In the other data sets (e.g., CO2 measurements) rounded data is inserted instead of the exact depth data, which is 6 m for lander_1 and 5 m for lander_2. The deployment and recovery of the landers and thus the measurements took place between 04 September 2019 and 04 October 2019 and the sensors were operated under battery power and a centralized timestamp. Three events common to coasts were observed during the deployment, allowing tracking of (1) an advection of saline waters with a mineralization signal, (2) a storm event of about 4 days, and (3) a stagnation event. Sensor data and processed data are available in separate files.

Nitrate raw measurements at lander 1 in the German Baltic Sea

Coastal ecosystems are heterogeneous environments with high turnover rates of carbon and nutrients that influence the distribution of greenhouse gases (GHG). They also represent challenging environments for scientific investigations, requiring new technologies that go beyond discrete sampling. Here we present temporal high-resolution measurements of several physicochemical variables, including the partial pressures of CO2 and CH4, made in shallow waters at around 6 m water depth of the Baltic Sea using two autonomous lander systems. The two landers were deployed at the sediment-water interface (bottom lander) and about 400 m offshore near the German city Rostock with support from the buoy tender “Rosenort” operated by the Wasserstraßen- und Schifffahrtsverwaltung des Bundes, Stralsund (WSA Stralsund). These landers were equipped with six commercially available state-of-the-art sensors. Field data resolution ranged from 10 seconds to 60 minutes and was obtained for partial pressure of CO2 (Contros HydroC-CO2) and CH4 (Contros HydroC-CH4), temperature, salinity, depth (hydrostatic pressure), O2 (CTD-O2 with SBE-37SMP-ODO), the concentrations of phosphate (SBE HydroCycle PO4), nitrate (SBE SUNA V2), chlorophyll a and the turbidity (both with SBE-FLNTUSB ECO) as stationary measurements at two different locations in close proximity. The CTD and oxygen measurements provide exact water depth data for the respective lander locations. In the other data sets (e.g., CO2 measurements) rounded data is inserted instead of the exact depth data, which is 6 m for lander_1 and 5 m for lander_2. The deployment and recovery of the landers and thus the measurements took place between 04 September 2019 and 04 October 2019 and the sensors were operated under battery power and a centralized timestamp. Three events common to coasts were observed during the deployment, allowing tracking of (1) an advection of saline waters with a mineralization signal, (2) a storm event of about 4 days, and (3) a stagnation event. Sensor data and processed data are available in separate files.

Methane measurements at lander 1 in the German Baltic Sea

Coastal ecosystems are heterogeneous environments with high turnover rates of carbon and nutrients that influence the distribution of greenhouse gases (GHG). They also represent challenging environments for scientific investigations, requiring new technologies that go beyond discrete sampling. Here we present temporal high-resolution measurements of several physicochemical variables, including the partial pressures of CO2 and CH4, made in shallow waters at around 6 m water depth of the Baltic Sea using two autonomous lander systems. The two landers were deployed at the sediment-water interface (bottom lander) and about 400 m offshore near the German city Rostock with support from the buoy tender “Rosenort” operated by the Wasserstraßen- und Schifffahrtsverwaltung des Bundes, Stralsund (WSA Stralsund). These landers were equipped with six commercially available state-of-the-art sensors. Field data resolution ranged from 10 seconds to 60 minutes and was obtained for partial pressure of CO2 (Contros HydroC-CO2) and CH4 (Contros HydroC-CH4), temperature, salinity, depth (hydrostatic pressure), O2 (CTD-O2 with SBE-37SMP-ODO), the concentrations of phosphate (SBE HydroCycle PO4), nitrate (SBE SUNA V2), chlorophyll a and the turbidity (both with SBE-FLNTUSB ECO) as stationary measurements at two different locations in close proximity. The CTD and oxygen measurements provide exact water depth data for the respective lander locations. In the other data sets (e.g., CO2 measurements) rounded data is inserted instead of the exact depth data, which is 6 m for lander_1 and 5 m for lander_2. The deployment and recovery of the landers and thus the measurements took place between 04 September 2019 and 04 October 2019 and the sensors were operated under battery power and a centralized timestamp. Three events common to coasts were observed during the deployment, allowing tracking of (1) an advection of saline waters with a mineralization signal, (2) a storm event of about 4 days, and (3) a stagnation event. Sensor data and processed data are available in separate files.

Carbon dioxide measurements at lander 1 in the German Baltic Sea

Coastal ecosystems are heterogeneous environments with high turnover rates of carbon and nutrients that influence the distribution of greenhouse gases (GHG). They also represent challenging environments for scientific investigations, requiring new technologies that go beyond discrete sampling. Here we present temporal high-resolution measurements of several physicochemical variables, including the partial pressures of CO2 and CH4, made in shallow waters at around 6 m water depth of the Baltic Sea using two autonomous lander systems. The two landers were deployed at the sediment-water interface (bottom lander) and about 400 m offshore near the German city Rostock with support from the buoy tender “Rosenort” operated by the Wasserstraßen- und Schifffahrtsverwaltung des Bundes, Stralsund (WSA Stralsund). These landers were equipped with six commercially available state-of-the-art sensors. Field data resolution ranged from 10 seconds to 60 minutes and was obtained for partial pressure of CO2 (Contros HydroC-CO2) and CH4 (Contros HydroC-CH4), temperature, salinity, depth (hydrostatic pressure), O2 (CTD-O2 with SBE-37SMP-ODO), the concentrations of phosphate (SBE HydroCycle PO4), nitrate (SBE SUNA V2), chlorophyll a and the turbidity (both with SBE-FLNTUSB ECO) as stationary measurements at two different locations in close proximity. The CTD and oxygen measurements provide exact water depth data for the respective lander locations. In the other data sets (e.g., CO2 measurements) rounded data is inserted instead of the exact depth data, which is 6 m for lander_1 and 5 m for lander_2. The deployment and recovery of the landers and thus the measurements took place between 04 September 2019 and 04 October 2019 and the sensors were operated under battery power and a centralized timestamp. Three events common to coasts were observed during the deployment, allowing tracking of (1) an advection of saline waters with a mineralization signal, (2) a storm event of about 4 days, and (3) a stagnation event. Sensor data and processed data are available in separate files.

Carbon dioxide measurements at lander 2 in the German Baltic Sea

Coastal ecosystems are heterogeneous environments with high turnover rates of carbon and nutrients that influence the distribution of greenhouse gases (GHG). They also represent challenging environments for scientific investigations, requiring new technologies that go beyond discrete sampling. Here we present temporal high-resolution measurements of several physicochemical variables, including the partial pressures of CO2 and CH4, made in shallow waters at around 6 m water depth of the Baltic Sea using two autonomous lander systems. The two landers were deployed at the sediment-water interface (bottom lander) and about 400 m offshore near the German city Rostock with support from the buoy tender “Rosenort” operated by the Wasserstraßen- und Schifffahrtsverwaltung des Bundes, Stralsund (WSA Stralsund). These landers were equipped with six commercially available state-of-the-art sensors. Field data resolution ranged from 10 seconds to 60 minutes and was obtained for partial pressure of CO2 (Contros HydroC-CO2) and CH4 (Contros HydroC-CH4), temperature, salinity, depth (hydrostatic pressure), O2 (CTD-O2 with SBE-37SMP-ODO), the concentrations of phosphate (SBE HydroCycle PO4), nitrate (SBE SUNA V2), chlorophyll a and the turbidity (both with SBE-FLNTUSB ECO) as stationary measurements at two different locations in close proximity. The CTD and oxygen measurements provide exact water depth data for the respective lander locations. In the other data sets (e.g., CO2 measurements) rounded data is inserted instead of the exact depth data, which is 6 m for lander_1 and 5 m for lander_2. The deployment and recovery of the landers and thus the measurements took place between 04 September 2019 and 04 October 2019 and the sensors were operated under battery power and a centralized timestamp. Three events common to coasts were observed during the deployment, allowing tracking of (1) an advection of saline waters with a mineralization signal, (2) a storm event of about 4 days, and (3) a stagnation event. Sensor data and processed data are available in separate files.

CTD and oxygen measurements at lander 2 in the German Baltic Sea

Coastal ecosystems are heterogeneous environments with high turnover rates of carbon and nutrients that influence the distribution of greenhouse gases (GHG). They also represent challenging environments for scientific investigations, requiring new technologies that go beyond discrete sampling. Here we present temporal high-resolution measurements of several physicochemical variables, including the partial pressures of CO2 and CH4, made in shallow waters at around 6 m water depth of the Baltic Sea using two autonomous lander systems. The two landers were deployed at the sediment-water interface (bottom lander) and about 400 m offshore near the German city Rostock with support from the buoy tender "Rosenort" operated by the Wasserstraßen- und Schifffahrtsverwaltung des Bundes, Stralsund (WSA Stralsund). These landers were equipped with six commercially available state-of-the-art sensors. Field data resolution ranged from 10 seconds to 60 minutes and was obtained for partial pressure of CO2 (Contros HydroC-CO2) and CH4 (Contros HydroC-CH4), temperature, salinity, depth (hydrostatic pressure), O2 (CTD-O2 with SBE-37SMP-ODO), the concentrations of phosphate (SBE HydroCycle PO4), nitrate (SBE SUNA V2), chlorophyll a and the turbidity (both with SBE-FLNTUSB ECO) as stationary measurements at two different locations in close proximity. The CTD and oxygen measurements provide exact water depth data for the respective lander locations. In the other data sets (e.g., CO2 measurements) rounded data is inserted instead of the exact depth data, which is 6 m for lander_1 and 5 m for lander_2. The deployment and recovery of the landers and thus the measurements took place between 04 September 2019 and 04 October 2019 and the sensors were operated under battery power and a centralized timestamp. Three events common to coasts were observed during the deployment, allowing tracking of (1) an advection of saline waters with a mineralization signal, (2) a storm event of about 4 days, and (3) a stagnation event. Sensor data and processed data are available in separate files.

Phosphate measurements at lander 2 in the German Baltic Sea

Coastal ecosystems are heterogeneous environments with high turnover rates of carbon and nutrients that influence the distribution of greenhouse gases (GHG). They also represent challenging environments for scientific investigations, requiring new technologies that go beyond discrete sampling. Here we present temporal high-resolution measurements of several physicochemical variables, including the partial pressures of CO2 and CH4, made in shallow waters at around 6 m water depth of the Baltic Sea using two autonomous lander systems. The two landers were deployed at the sediment-water interface (bottom lander) and about 400 m offshore near the German city Rostock with support from the buoy tender “Rosenort” operated by the Wasserstraßen- und Schifffahrtsverwaltung des Bundes, Stralsund (WSA Stralsund). These landers were equipped with six commercially available state-of-the-art sensors. Field data resolution ranged from 10 seconds to 60 minutes and was obtained for partial pressure of CO2 (Contros HydroC-CO2) and CH4 (Contros HydroC-CH4), temperature, salinity, depth (hydrostatic pressure), O2 (CTD-O2 with SBE-37SMP-ODO), the concentrations of phosphate (SBE HydroCycle PO4), nitrate (SBE SUNA V2), chlorophyll a and the turbidity (both with SBE-FLNTUSB ECO) as stationary measurements at two different locations in close proximity. The CTD and oxygen measurements provide exact water depth data for the respective lander locations. In the other data sets (e.g., CO2 measurements) rounded data is inserted instead of the exact depth data, which is 6 m for lander_1 and 5 m for lander_2. The deployment and recovery of the landers and thus the measurements took place between 04 September 2019 and 04 October 2019 and the sensors were operated under battery power and a centralized timestamp. Three events common to coasts were observed during the deployment, allowing tracking of (1) an advection of saline waters with a mineralization signal, (2) a storm event of about 4 days, and (3) a stagnation event. Sensor data and processed data are available in separate files.

Phosphate measurements at lander 1 in the German Baltic Sea

Coastal ecosystems are heterogeneous environments with high turnover rates of carbon and nutrients that influence the distribution of greenhouse gases (GHG). They also represent challenging environments for scientific investigations, requiring new technologies that go beyond discrete sampling. Here we present temporal high-resolution measurements of several physicochemical variables, including the partial pressures of CO2 and CH4, made in shallow waters at around 6 m water depth of the Baltic Sea using two autonomous lander systems. The two landers were deployed at the sediment-water interface (bottom lander) and about 400 m offshore near the German city Rostock with support from the buoy tender “Rosenort” operated by the Wasserstraßen- und Schifffahrtsverwaltung des Bundes, Stralsund (WSA Stralsund). These landers were equipped with six commercially available state-of-the-art sensors. Field data resolution ranged from 10 seconds to 60 minutes and was obtained for partial pressure of CO2 (Contros HydroC-CO2) and CH4 (Contros HydroC-CH4), temperature, salinity, depth (hydrostatic pressure), O2 (CTD-O2 with SBE-37SMP-ODO), the concentrations of phosphate (SBE HydroCycle PO4), nitrate (SBE SUNA V2), chlorophyll a and the turbidity (both with SBE-FLNTUSB ECO) as stationary measurements at two different locations in close proximity. The CTD and oxygen measurements provide exact water depth data for the respective lander locations. In the other data sets (e.g., CO2 measurements) rounded data is inserted instead of the exact depth data, which is 6 m for lander_1 and 5 m for lander_2. The deployment and recovery of the landers and thus the measurements took place between 04 September 2019 and 04 October 2019 and the sensors were operated under battery power and a centralized timestamp. Three events common to coasts were observed during the deployment, allowing tracking of (1) an advection of saline waters with a mineralization signal, (2) a storm event of about 4 days, and (3) a stagnation event. Sensor data and processed data are available in separate files.

1 2 3 4 5