Other language confidence: 0.9682240027118152
Data presented here were collected between January 2025 to December 2025 within the research unit DynaCom (Spatial community ecology in highly dynamic landscapes: From island biogeography to metaecosystems, https://uol.de/dynacom/ ) of the Universities of Oldenburg, Göttingen, and Münster, the iDiv Leipzig and the Nationalpark Niedersächsisches Wattenmeer. Experimental islands and saltmarsh enclosed plots were created in the back barrier tidal flat and in the saltmarsh zone of the island of Spiekeroog. Meteorological data were collected near the experimental setup, with a locally installed weather station located approximately 500m north of the southern shoreline. The weather station system used here was a ClimaSensor US 4.920x.00.00x that was pre-calibrated by the manufacturer (Adolf Thies GmbH & Co. KG, D-Göttingen). Data were recorded and saved within the Processcontrol Weather (c) -4H- JENA engineering GmbH (v20.1.0.1 2020) software in a sampling interval of 1 min, with an averaging time of 10 s. Date and time were given in UTC and the position was derived from the internal GPS system. Data handling was performed according to Zielinski et al. (2018): Post-processing of collected data was done using MATLAB (R2024b). Quality control was performed by (a) erasing data covering maintenance activities, (b) removing outliers, defined as data exhibiting changes of more than two standard deviations within one time step, and (c) visually checks.
Während die Auswirkungen von Klimawandel auf physiologische und ökologische Prozesse das Thema zahlreicher Untersuchungen waren, sind evolutionäre Prozesse im Zusammenhang mit Klimawandel weit weniger gut untersucht. Insbesondere mangelt es an Studien zu möglichen komplexen Wechselwirkungen zwischen ökologischen und evolutionären Prozessen in einer sich ändernden Umwelt. Artspezifische Unterschiede in Anpassungsraten könnten die Dynamik der gesamten Art-Gemeinschaft beeinflussen, umgekehrt könnten sich ökologische Prozesse wie Interaktionen zwischen Arten, Immigration und Emigration auf das Anpassungspotential von Arten auswirken. Die Tatsache, dass Klimawandel zu Veränderungen in mehreren Umweltfaktoren führt, macht Vorhersagen über mögliche Auswirkungen noch schwieriger, da sich Veränderungen in mehreren Stressoren interaktiv auf ökologische und evolutionäre Prozesse auswirken könnten. Die Ziele des vorgeschlagenen Projektes sind die Analyse von ökologischen und evolutionären Prozessen und deren Wechselwirkung (1) bei Veränderung von mehreren Stressoren, (2) bei Umweltveränderung in trophisch einfachen versus trophisch komplexen Gemeinschaften, und (3) bei Umweltveränderung in isolierten versus verbundenen Habitaten. Diese Fragestellungen sollen mit einer Kombination aus Modellierung, Mikrokosmen- und Mesokosmen-Experimenten untersucht werden. In einem Selektionsexperiment über hunderte von Generationen werden mehrere Algenarten bei konstanten bzw. steigenden CO2- und/oder Temperatur-Werten exponiert. Ebenso werden mehrere Ciliatenarten bei konstanter bzw. steigender Temperatur gehalten. Reziproke Transplantationsexperimente testen, ob eine mögliche Anpassung von Algen an steigende CO2-Werte durch gleichzeitige Erhöhung der Temperatur beeinflusst wird. Weiters wird getestet, ob sich Arten von verschiedenen trophischen Ebenen (Algen versus Ciliaten) in ihrer Anpassungsfähigkeit unterscheiden. Reziproke Transplantationsexperimente der gesamten Gemeinschaft werden testen, ob evolutionäre Prozesse die Dynamik der Gemeinschaft beeinflussen. Interaktive Effekte von Umweltveränderung und Habitatkonnektivität auf ökologische und evolutionäre Prozesse werden sowohl in einem Mikrokosmenexperiment als auch in einem Mesokosmenexperiment untersucht. Der Effekt von steigender Temperatur (Mikrokosmenexperiment) bzw. abnehmendem pH-Wert (Mesokosmenexperiment) wird in isolierten bzw. verbundenen Habitaten verglichen. In einem theoretischen Ansatz werden die drei Fragestellungen in einem Modell verknüpft. Zunächst werden Evolution und Umweltveränderung in ein Metagemeinschaftsmodell integriert. Entlang eines Konnektivitäts-Gradienten wird die relative Bedeutung von lokaler Anpassung im Vergleich zu Wanderungsprozessen untersucht. usw.
Data presented here were collected between January 2024 to December 2024 within the research unit DynaCom (Spatial community ecology in highly dynamic landscapes: From island biogeography to metaecosystems, https://uol.de/dynacom/ ) of the Universities of Oldenburg, Göttingen, and Münster, the iDiv Leipzig and the Nationalpark Niedersächsisches Wattenmeer. Experimental islands and saltmarsh enclosed plots were created in the back barrier tidal flat and in the saltmarsh zone of the island of Spiekeroog. Meteorological data were collected near the experimental setup, with a locally installed weather station located approximately 500m north of the southern shoreline. The weather station system used here was a ClimaSensor US 4.920x.00.00x that was pre-calibrated by the manufacturer (Adolf Thies GmbH & Co. KG, D-Göttingen). Data were recorded and saved within the Processcontrol Weather (c) -4H- JENA engineering GmbH (v20.1.0.1 2020) software in a sampling interval of 1 min, with an averaging time of 10 s. Date and time were given in UTC and the position was derived from the internal GPS system. Data handling was performed according to Zielinski et al. (2018): Post-processing of collected data was done using MATLAB (R2024b). Quality control was performed by (a) erasing data covering maintenance activities, (b) removing outliers, defined as data exhibiting changes of more than two standard deviations within one time step, and (c) visually checks.
Data presented here were collected between January 2022 to December 2023 within the research unit DynaCom (Spatial community ecology in highly dynamic landscapes: From island biogeography to metaecosystems, https://uol.de/dynacom/ ) of the Universities of Oldenburg, Göttingen, and Münster, the iDiv Leipzig and the Nationalpark Niedersächsisches Wattenmeer. Experimental islands and saltmarsh enclosed plots were created in the back barrier tidal flat and in the saltmarsh zone of the island of Spiekeroog. Meteorological data were collected near the experimental setup, with a locally installed weather station located approximately 500m north of the southern shoreline. The weather station system used here was a ClimaSensor US 4.920x.00.00x that was pre-calibrated by the manufacturer (Adolf Thies GmbH & Co. KG, D-Göttingen). Data were recorded and saved within the Processcontrol Weather (c) -4H- JENA engineering GmbH (v20.1.0.1 2020) software in a sampling interval of 1 min, with an averaging time of 10 s. Date and time were given in UTC and the position was derived from the internal GPS system. Data handling was performed according to Zielinski et al. (2018): Post-processing of collected data was done using MATLAB (R2018a). Quality control was performed by (a) erasing data covering maintenance activities, (b) removing outliers, defined as data exhibiting changes of more than two standard deviations within one time step, and (c) visually checks.
Data presented here were collected between January 2022 to December 2023 within the research unit DynaCom (Spatial community ecology in highly dynamic landscapes: From island biogeography to metaecosystems, https://uol.de/dynacom/ ) of the Universities of Oldenburg, Göttingen, and Münster, the iDiv Leipzig and the Nationalpark Niedersächsisches Wattenmeer. Experimental islands and saltmarsh enclosed plots were created in the back barrier tidal flat and in the saltmarsh zone of the island of Spiekeroog. Meteorological data were collected near the experimental setup, with a locally installed weather station located approximately 500m north of the southern shoreline. The weather station system used here was a ClimaSensor US 4.920x.00.00x that was pre-calibrated by the manufacturer (Adolf Thies GmbH & Co. KG, D-Göttingen). Data were recorded and saved within the Processcontrol Weather (c) -4H- JENA engineering GmbH (v20.1.0.1 2020) software in a sampling interval of 1 min, with an averaging time of 10 s. Date and time were given in UTC and the position was derived from the internal GPS system. Data handling was performed according to Zielinski et al. (2018): Post-processing of collected data was done using MATLAB (R2018a). Quality control was performed by (a) erasing data covering maintenance activities, (b) removing outliers, defined as data exhibiting changes of more than two standard deviations within one time step, and (c) visually checks.
Data presented here were collected between January 2022 to December 2023 within the research unit DynaCom (Spatial community ecology in highly dynamic landscapes: From island biogeography to metaecosystems, https://uol.de/dynacom/ ) of the Universities of Oldenburg, Göttingen, and Münster, the iDiv Leipzig and the Nationalpark Niedersächsisches Wattenmeer. Experimental islands and saltmarsh enclosed plots were created in the back barrier tidal flat and in the saltmarsh zone of the island of Spiekeroog. Meteorological data were collected near the experimental setup, with a locally installed weather station located approximately 500m north of the southern shoreline. The weather station system used here was a ClimaSensor US 4.920x.00.00x that was pre-calibrated by the manufacturer (Adolf Thies GmbH & Co. KG, D-Göttingen). Data were recorded and saved within the Processcontrol Weather (c) -4H- JENA engineering GmbH (v20.1.0.1 2020) software in a sampling interval of 1 min, with an averaging time of 10 s. Date and time were given in UTC and the position was derived from the internal GPS system. Data handling was performed according to Zielinski et al. (2018): Post-processing of collected data was done using MATLAB (R2018a). Quality control was performed by (a) erasing data covering maintenance activities, (b) removing outliers, defined as data exhibiting changes of more than two standard deviations within one time step, and (c) visually checks.
Data presented here were collected between January 2022 to December 2023 within the research unit DynaCom (Spatial community ecology in highly dynamic landscapes: From island biogeography to metaecosystems, https://uol.de/dynacom/ ) of the Universities of Oldenburg, Göttingen, and Münster, the iDiv Leipzig and the Nationalpark Niedersächsisches Wattenmeer. Experimental islands and saltmarsh enclosed plots were created in the back barrier tidal flat and in the saltmarsh zone of the island of Spiekeroog. Meteorological data were collected near the experimental setup, with a locally installed weather station located approximately 500m north of the southern shoreline. The weather station system used here was a ClimaSensor US 4.920x.00.00x that was pre-calibrated by the manufacturer (Adolf Thies GmbH & Co. KG, D-Göttingen). Data were recorded and saved within the Processcontrol Weather (c) -4H- JENA engineering GmbH (v20.1.0.1 2020) software in a sampling interval of 1 min, with an averaging time of 10 s. Date and time were given in UTC and the position was derived from the internal GPS system. Data handling was performed according to Zielinski et al. (2018): Post-processing of collected data was done using MATLAB (R2018a). Quality control was performed by (a) erasing data covering maintenance activities, (b) removing outliers, defined as data exhibiting changes of more than two standard deviations within one time step, and (c) visually checks.
Data presented here were collected between January 2022 to December 2023 within the research unit DynaCom (Spatial community ecology in highly dynamic landscapes: From island biogeography to metaecosystems, https://uol.de/dynacom/ ) of the Universities of Oldenburg, Göttingen, and Münster, the iDiv Leipzig and the Nationalpark Niedersächsisches Wattenmeer. Experimental islands and saltmarsh enclosed plots were created in the back barrier tidal flat and in the saltmarsh zone of the island of Spiekeroog. Meteorological data were collected near the experimental setup, with a locally installed weather station located approximately 500m north of the southern shoreline. The weather station system used here was a ClimaSensor US 4.920x.00.00x that was pre-calibrated by the manufacturer (Adolf Thies GmbH & Co. KG, D-Göttingen). Data were recorded and saved within the Processcontrol Weather (c) -4H- JENA engineering GmbH (v20.1.0.1 2020) software in a sampling interval of 1 min, with an averaging time of 10 s. Date and time were given in UTC and the position was derived from the internal GPS system. Data handling was performed according to Zielinski et al. (2018): Post-processing of collected data was done using MATLAB (R2018a). Quality control was performed by (a) erasing data covering maintenance activities, (b) removing outliers, defined as data exhibiting changes of more than two standard deviations within one time step, and (c) visually checks.
Data presented here were collected between January 2022 to December 2023 within the research unit DynaCom (Spatial community ecology in highly dynamic landscapes: From island biogeography to metaecosystems, https://uol.de/dynacom/ ) of the Universities of Oldenburg, Göttingen, and Münster, the iDiv Leipzig and the Nationalpark Niedersächsisches Wattenmeer. Experimental islands and saltmarsh enclosed plots were created in the back barrier tidal flat and in the saltmarsh zone of the island of Spiekeroog. Meteorological data were collected near the experimental setup, with a locally installed weather station located approximately 500m north of the southern shoreline. The weather station system used here was a ClimaSensor US 4.920x.00.00x that was pre-calibrated by the manufacturer (Adolf Thies GmbH & Co. KG, D-Göttingen). Data were recorded and saved within the Processcontrol Weather (c) -4H- JENA engineering GmbH (v20.1.0.1 2020) software in a sampling interval of 1 min, with an averaging time of 10 s. Date and time were given in UTC and the position was derived from the internal GPS system. Data handling was performed according to Zielinski et al. (2018): Post-processing of collected data was done using MATLAB (R2018a). Quality control was performed by (a) erasing data covering maintenance activities, (b) removing outliers, defined as data exhibiting changes of more than two standard deviations within one time step, and (c) visually checks.
Data presented here were collected between January 2022 to December 2023 within the research unit DynaCom (Spatial community ecology in highly dynamic landscapes: From island biogeography to metaecosystems, https://uol.de/dynacom/ ) of the Universities of Oldenburg, Göttingen, and Münster, the iDiv Leipzig and the Nationalpark Niedersächsisches Wattenmeer. Experimental islands and saltmarsh enclosed plots were created in the back barrier tidal flat and in the saltmarsh zone of the island of Spiekeroog. Meteorological data were collected near the experimental setup, with a locally installed weather station located approximately 500m north of the southern shoreline. The weather station system used here was a ClimaSensor US 4.920x.00.00x that was pre-calibrated by the manufacturer (Adolf Thies GmbH & Co. KG, D-Göttingen). Data were recorded and saved within the Processcontrol Weather (c) -4H- JENA engineering GmbH (v20.1.0.1 2020) software in a sampling interval of 1 min, with an averaging time of 10 s. Date and time were given in UTC and the position was derived from the internal GPS system. Data handling was performed according to Zielinski et al. (2018): Post-processing of collected data was done using MATLAB (R2018a). Quality control was performed by (a) erasing data covering maintenance activities, (b) removing outliers, defined as data exhibiting changes of more than two standard deviations within one time step, and (c) visually checks.
| Organisation | Count |
|---|---|
| Bund | 2 |
| Wissenschaft | 387 |
| Type | Count |
|---|---|
| Daten und Messstellen | 386 |
| Förderprogramm | 2 |
| License | Count |
|---|---|
| Offen | 388 |
| Language | Count |
|---|---|
| Deutsch | 1 |
| Englisch | 387 |
| Resource type | Count |
|---|---|
| Archiv | 15 |
| Datei | 371 |
| Keine | 2 |
| Topic | Count |
|---|---|
| Boden | 179 |
| Lebewesen und Lebensräume | 388 |
| Luft | 93 |
| Mensch und Umwelt | 388 |
| Wasser | 376 |
| Weitere | 388 |