Other language confidence: 0.967025441658288
The DFG funded DeepEarthshape project within the SPP1803 EarthShape (second phase) combines several geoscientific methods and approaches to study the weathering zone in detail in dependence of climate conditions. Projects of the first phase have shown that the weathering zone is much deeper than expected, so that the weathering front was never encountered in the excavated soil pits. At depth of 1 – 2 m appreciable amounts of microbial biomass and DNA counts were encountered. It was further found that bacteria and archaea colonizing rock surfaces are close relatives to those from deeper soil zones. Because we do not know a) the depth of weathering; b) the process advancing it; c) whether this advance is driven by water, gases, and/or biological activity and concentrated along faults; d) whether this zone presents a habitat and interacts with the surface biosphere, we have designed a drilling campaign at all four study sites for joint geochemical, biogeochemical and microbiological exploration and a geophysical campaign for imaging the depth and physical properties of the critical zone. The principle hypotheses of the DeepEarthshape projects are: 1) The advance of the weathering front at depth is a recent process that is linked to climate and coupled with erosion at the surface through a biogeochemical feedback 2) Microbial activity in the deep regolith that advances weathering is fuelled by young organic matter. The four study sites are distributed along the coast of Chile to have a similar geological setting at one hand but different climatic conditions. Here we present the logging data of the first geophysical borehole survey which took place at Santa Gracia, 40 km NE of La Serena (Coquimbo Region, Chile). The data were acquired on the 2nd of April 2019 between . The borehole logging was conducted by COMPROBE. The vertical borehole reached down to 87.2 m depth and had a diameter (PQ) of 83.5 mm.
KTB Borehole Measurements Data Gravimetry inside the borehole Extensive borehole measurements were performed during the active drilling phase of the KTB pilot and main hole. The data report STR 21/03 KTB Borehole logging data contains the full description of the logging data given here. Please read it thoroughly to avoid inappropriate or wrong use of the data. The KTB borehole measurement data files contain the final processed versions of logging data from the two KTB boreholes: • KTB-Oberpfalz VB (KTB Vorbohrung/Pilot Hole or KTB-VB) • KTB-Oberpfalz HB (KTB Hauptbohrung/Main Hole or KTB-HB). Here only the acronyms KTB-VB and KTB-HB are used. In total there are 145 data files from the KTB-VB and 239 data files from the KTB-HB. All logs were run in open hole unless noted otherwise (see the file header). The maximum logging depth was 4001 m in the KTB-VB and 9085 m in the KTB-HB. The files of the Gravimetry measurements contain data from measurements made with a Lacoste-Romberg gravity meter sonde from the company EDCON, USA. The gravimetry logs are not depth corrected to the reference GR because the sonde had no GR sensor. The data are provided in ASCII format. Detailed descriptions are provided in the associated data report (STR 21/03, Kueck et al., 2021) and the KTB Borehole Measurements Catalog. Acknkowledgements: The GFZ German Research Centre for Geosciences, Potsdam, Germany, as successor of the KTB Project Management provides the logging data, which were obtained under grants RG8604, RG8803 and RG 9001 of the Federal Ministry of Research and Technology of Germany.
KTB Borehole Measurements Data Magnetic Susceptibility and Magnetic Field Extensive borehole measurements were performed during the active drilling phase of the KTB pilot and main hole. The data report STR 21/03 KTB Borehole logging data contains the full description of the logging data given here. Please read it thoroughly to avoid inappropriate or wrong use of the data. The KTB borehole measurement data files contain the final processed versions of logging data from the two KTB boreholes: • KTB-Oberpfalz VB (KTB Vorbohrung/Pilot Hole or KTB-VB) • KTB-Oberpfalz HB (KTB Hauptbohrung/Main Hole or KTB-HB). Here only the acronyms KTB-VB and KTB-HB are used. In total there are 145 data files from the KTB-VB and 239 data files from the KTB-HB. All logs were run in open hole unless noted otherwise (see the file header). The maximum logging depth was 4001 m in the KTB-VB and 9085 m in the KTB-HB. The Magnetic Susceptibility (MSUS) and Magnetic Field data files comprise data from a magnetic susceptibility sonde from the university of Munich, and two magnetometer sondes from the university of Braunschweig (FML-BS) and of Schlumberger (GPIT). MSUS was only run in the KTB-VB. The Braunschweig magnetometer was run in both KTB boreholes and the GPIT only in the KTB-HB. The MSUS log and the magnetic field log in the KTB-VB are not depth corrected to the reference GR because the sondes had no GR sensor. Both types of magnetic field logs in the KTB-HB are depth corrected to the reference GR. The data are provided in ASCII format. Detailed descriptions are provided in the associated data report (STR 21/03, Kueck et al., 2021) and the KTB Borehole Measurements Catalog. Acknkowledgements: The GFZ German Research Centre for Geosciences, Potsdam, Germany, as successor of the KTB Project Management provides the logging data, which were obtained under grants RG8604, RG8803 and RG 9001 of the Federal Ministry of Research and Technology of Germany.
KTB Borehole Measurements Data Composite Logs Extensive borehole measurements were performed during the active drilling phase of the KTB pilot and main hole. The data report STR 21/03 KTB Borehole logging data contains the full description of the logging data given here. Please read it thoroughly to avoid inappropriate or wrong use of the data. The KTB borehole measurement data files contain the final processed versions of logging data from the two KTB boreholes: • KTB-Oberpfalz VB (KTB Vorbohrung/Pilot Hole or KTB-VB) • KTB-Oberpfalz HB (KTB Hauptbohrung/Main Hole or KTB-HB). Here only the acronyms KTB-VB and KTB-HB are used. In total there are 145 data files from the KTB-VB and 239 data files from the KTB-HB. All logs were run in open hole unless noted otherwise (see the file header). The maximum logging depth was 4001 m in the KTB-VB and 9085 m in the KTB-HB. The Composite Log Files comprise data from these measurements/logs: • Reference total GR • Natural Gamma Spectrum (NGS) • Resistivity (DLL, DIL, MSFL, ARI) • Density (LDT, FDC) • Neutron Porosity (CNL) • Sonic (SONIC, STC) There is no sonic waveform data available. All Composite Logs are depth corrected to the reference GR of each borehole. The data are provided in ASCII format. Detailed descriptions are provided in the associated data report (STR 21/03, Kueck et al., 2021) and the KTB Borehole Measurements Catalog. Acknkowledgements: The GFZ German Research Centre for Geosciences, Potsdam, Germany, as successor of the KTB Project Management provides the logging data, which were obtained under grants RG8604, RG8803 and RG 9001 of the Federal Ministry of Research and Technology of Germany.
KTB Borehole Measurements Data Spontaneous Potential and Induced Polarization (SP & IP) Extensive borehole measurements were performed during the active drilling phase of the KTB pilot and main hole. The data report STR 21/03 KTB Borehole logging data contains the full description of the logging data given here. Please read it thoroughly to avoid inappropriate or wrong use of the data. The KTB borehole measurement data files contain the final processed versions of logging data from the two KTB boreholes: • KTB-Oberpfalz VB (KTB Vorbohrung/Pilot Hole or KTB-VB) • KTB-Oberpfalz HB (KTB Hauptbohrung/Main Hole or KTB-HB). Here only the acronyms KTB-VB and KTB-HB are used. In total there are 145 data files from the KTB-VB and 239 data files from the KTB-HB. All logs were run in open hole unless noted otherwise (see the file header). The maximum logging depth was 4001 m in the KTB-VB and 9085 m in the KTB-HB. The SP and IP data files comprise data from a spontaneous potential sonde run in the KTB-VB and from two different induced polarization sondes run in both KTB-VB and KTB-HB. The SP and IP logs are not depth corrected to the reference GR because the sondes had no GR sensor. The data are provided in ASCII format. Detailed descriptions are provided in the associated data report (STR 21/03, Kueck et al., 2021) and the KTB Borehole Measurements Catalog. Acknkowledgements: The GFZ German Research Centre for Geosciences, Potsdam, Germany, as successor of the KTB Project Management provides the logging data, which were obtained under grants RG8604, RG8803 and RG 9001 of the Federal Ministry of Research and Technology of Germany.
KTB Borehole Measurements Data Structures from Borehole Images: Foliation and Fracs/Faults/Joints Extensive borehole measurements were performed during the active drilling phase of the KTB pilot and main hole. The data report STR 21/03 KTB Borehole logging data contains the full description of the logging data given here. Please read it thoroughly to avoid inappropriate or wrong use of the data. The KTB borehole measurement data files contain the final processed versions of logging data from the two KTB boreholes: • KTB-Oberpfalz VB (KTB Vorbohrung/Pilot Hole or KTB-VB) • KTB-Oberpfalz HB (KTB Hauptbohrung/Main Hole or KTB-HB). Here only the acronyms KTB-VB and KTB-HB are used. In total there are 145 data files from the KTB-VB and 239 data files from the KTB-HB. All logs were run in open hole unless noted otherwise (see the file header). The maximum logging depth was 4001 m in the KTB-VB and 9085 m in the KTB-HB. The Structures from Borehole Images files comprise data from processing results of electrical borehole images of both KTB boreholes. In the processing the spatial orientation (dip and dip direction) of the foliation and of other planar structures as fractures, faults, joints (etc.) was determined manually by sine structure picking on FMS/FMI images. The structural data are depth corrected to the reference GR (see Composite Logs) of the respective borehole. The data are provided in ASCII format. Detailed descriptions are provided in the associated data report (STR 21/03, Kueck et al., 2021) and the KTB Borehole Measurements Catalog. Acknkowledgements: The GFZ German Research Centre for Geosciences, Potsdam, Germany, as successor of the KTB Project Management provides the logging data, which were obtained under grants RG8604, RG8803 and RG 9001 of the Federal Ministry of Research and Technology of Germany.
KTB Borehole Measurements Data Borehole Geometry and orientation Logs (BGL) Extensive borehole measurements were performed during the active drilling phase of the KTB pilot and main hole. The data report STR 21/03 KTB Borehole logging data contains the full description of the logging data given here. Please read it thoroughly to avoid inappropriate or wrong use of the data. The KTB borehole measurement data files contain the final processed versions of logging data from the two KTB boreholes: • KTB-Oberpfalz VB (KTB Vorbohrung/Pilot Hole or KTB-VB) • KTB-Oberpfalz HB (KTB Hauptbohrung/Main Hole or KTB-HB). Here only the acronyms KTB-VB and KTB-HB are used. In total there are 145 data files from the KTB-VB and 239 data files from the KTB-HB. All logs were run in open hole unless noted otherwise (see the file header). The maximum logging depth was 4001 m in the KTB-VB and 9085 m in the KTB-HB. The Borehole Geometry and orientation Logs files contain data from measurements made with oriented 4-arm caliper sondes. Besides all single BG logs from each borehole also compilations of those BG logs representing the borehole geometry state during the major logging sessions and the derived borehole trajectory and true vertical depth are included here. The many single logs allow to analyze the development of the borehole shape over time. The date when logged is denoted in the file header. Please note that the single Borehole Geometry Logs are not depth corrected to the reference GR but are given here as logged. The BGL compilations and derived data are depth corrected to the reference GR. The data are provided in ASCII format. Detailed descriptions are provided in the associated data report (STR 21/03, Kueck et al., 2021) and the KTB Borehole Measurements Catalog. Acknkowledgements: The GFZ German Research Centre for Geosciences, Potsdam, Germany, as successor of the KTB Project Management provides the logging data, which were obtained under grants RG8604, RG8803 and RG 9001 of the Federal Ministry of Research and Technology of Germany.
KTB Borehole Measurements Data Geochemical Logs (GLT) Extensive borehole measurements were performed during the active drilling phase of the KTB pilot and main hole. All KTB borehole measurements are described in detail in the Scientific Technical Report - Data 21/03 "KTB Borehole Logging Data" (Kück et al. 2021). Please read it thoroughly to avoid inappropriate or wrong use of the data. The KTB borehole measurement data files contain the final processed versions of logging data from the two KTB boreholes: • KTB-Oberpfalz VB (KTB Vorbohrung/Pilot Hole or KTB-VB) • KTB-Oberpfalz HB (KTB Hauptbohrung/Main Hole or KTB-HB). Here only the acronyms KTB-VB and KTB-HB are used. In total there are 145 data files from the KTB-VB and 239 data files from the KTB-HB. All logs were run in open hole unless noted otherwise (see the file header). The maximum logging depth was 4001 m in the KTB-VB and 9085 m in the KTB-HB. The files of the Geochemical Logs contain data from measurements made with the Schlumberger GLT sonde. This sonde was a combination of several passive and active nuclear tools yielding the relative abundances of nine elements. The geochemical logs are depth corrected to the reference GR (see Composite Logs) of the respective borehole. The data are provided in ASCII format. Detailed descriptions are provided in the associated data report (STR 21/03, Kueck et al., 2021) and the KTB Borehole Measurements Catalog. Acknkowledgements: The GFZ German Research Centre for Geosciences, Potsdam, Germany, as successor of the KTB Project Management provides the logging data, which were obtained under grants RG8604, RG8803 and RG 9001 of the Federal Ministry of Research and Technology of Germany.
KTB Borehole Measurements Data Temperature Logs Extensive borehole measurements were performed during the active drilling phase of the KTB pilot and main hole. The data report STR 21/03 KTB Borehole logging data contains the full description of the logging data given here. Please read it thoroughly to avoid inappropriate or wrong use of the data. The KTB borehole measurement data files contain the final processed versions of logging data from the two KTB boreholes: • KTB-Oberpfalz VB (KTB Vorbohrung/Pilot Hole or KTB-VB) • KTB-Oberpfalz HB (KTB Hauptbohrung/Main Hole or KTB-HB). Here only the acronyms KTB-VB and KTB-HB are used. In total there are 145 data files from the KTB-VB and 239 data files from the KTB-HB. All logs were run in open hole unless noted otherwise (see the file header). The maximum logging depth was 4001 m in the KTB-VB and 9085 m in the KTB-HB. The Temperature files contain data from measurements made with various sondes incorporating a temperature sensor. The single logs from each borehole reflect the temporary temperature profile, which was always disturbed and altered by drilling activities, mainly the the mud circulation. There is no reference temperature log showing the undisturbed equilibrium temperature profile from the active drilling phase until 1994. The best available approximation to the equilibrium profile of the KTB-HB was measured in 1998, in file KTB-HB-BM-TEMP-1996-1997-1998-2000.txt. Many of the Temperature logs also include a measurement of the mud resistivity (MRES from the auxiliary measurement tool, AMS), the resistivity of the fluid in the borehole. Please note that the Temperature logs are not depth corrected to the reference GR but are given here as logged. The data are provided in ASCII format. Detailed descriptions are provided in the associated data report (STR 21/03, Kueck et al., 2021) and the KTB Borehole Measurements Catalog. Acknkowledgements: The GFZ German Research Centre for Geosciences, Potsdam, Germany, as successor of the KTB Project Management provides the logging data, which were obtained under grants RG8604, RG8803 and RG 9001 of the Federal Ministry of Research and Technology of Germany.
| Organisation | Count |
|---|---|
| Wissenschaft | 9 |
| Type | Count |
|---|---|
| unbekannt | 9 |
| License | Count |
|---|---|
| Offen | 9 |
| Language | Count |
|---|---|
| Englisch | 9 |
| Resource type | Count |
|---|---|
| Keine | 9 |
| Topic | Count |
|---|---|
| Boden | 9 |
| Lebewesen und Lebensräume | 9 |
| Luft | 1 |
| Mensch und Umwelt | 9 |
| Wasser | 1 |
| Weitere | 9 |